From patchwork Fri Mar 27 04:41:26 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chen-Yu Tsai X-Patchwork-Id: 244390 List-Id: U-Boot discussion From: wens at kernel.org (Chen-Yu Tsai) Date: Fri, 27 Mar 2020 12:41:26 +0800 Subject: [PATCH 2/6] rockchip: dts: rk3328-evb: Move gmac2io related nodes to -u-boot.dtsi In-Reply-To: <20200327044130.8763-1-wens@kernel.org> References: <20200327044130.8763-1-wens@kernel.org> Message-ID: <20200327044130.8763-3-wens@kernel.org> From: Chen-Yu Tsai The device tree file for rk3328-evb in the Linux kernel does not have gmac2io enabled. Instead, gmac2phy is enabled, but that is not supported in U-boot. Move the gmac2io related nodes to rk3328-evb-u-boot.dtsi to preserve the current functionality. When the device tree files are synced, gmac2phy should be marked as "broken" in -u-boot.dtsi files. Signed-off-by: Chen-Yu Tsai Reviewed-by: Kever Yang --- arch/arm/dts/rk3328-evb-u-boot.dtsi | 23 +++++++++++++++++++++++ arch/arm/dts/rk3328-evb.dts | 23 ----------------------- 2 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi index 5679897279aa..8ba53cf8f44b 100644 --- a/arch/arm/dts/rk3328-evb-u-boot.dtsi +++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi @@ -7,6 +7,13 @@ #include "rk3328-sdram-ddr3-666.dtsi" /{ + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + vcc5v0_host_xhci: vcc5v0-host-xhci-drv { compatible = "regulator-fixed"; enable-active-high; @@ -17,6 +24,22 @@ }; }; +&gmac2io { + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; +}; + &usb_host0_xhci { vbus-supply = <&vcc5v0_host_xhci>; status = "okay"; diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts index e9bc849f8c23..97bef37cf610 100644 --- a/arch/arm/dts/rk3328-evb.dts +++ b/arch/arm/dts/rk3328-evb.dts @@ -14,13 +14,6 @@ stdout-path = &uart2; }; - gmac_clkin: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac_clkin"; - #clock-cells = <0>; - }; - vcc3v3_sdmmc: sdmmc-pwren { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; @@ -78,22 +71,6 @@ status = "okay"; }; -&gmac2io { - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; - assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmiim1_pins>; - tx_delay = <0x26>; - rx_delay = <0x11>; - status = "okay"; -}; - &usb_host0_ehci { status = "okay"; };