Message ID | 20200327044130.8763-3-wens@kernel.org |
---|---|
State | New |
Headers | show |
Series | rockchip: rk3328: sync dts and add ROC-RK3328-CC board | expand |
On 2020/3/27 ??12:41, Chen-Yu Tsai wrote: > From: Chen-Yu Tsai <wens at csie.org> > > The device tree file for rk3328-evb in the Linux kernel does not have > gmac2io enabled. Instead, gmac2phy is enabled, but that is not supported > in U-boot. > > Move the gmac2io related nodes to rk3328-evb-u-boot.dtsi to preserve the > current functionality. When the device tree files are synced, gmac2phy > should be marked as "broken" in -u-boot.dtsi files. > > Signed-off-by: Chen-Yu Tsai <wens at csie.org> Reviewed-by: Kever Yang <kever.yang at rock-chips.com> Thanks, - Kever > --- > arch/arm/dts/rk3328-evb-u-boot.dtsi | 23 +++++++++++++++++++++++ > arch/arm/dts/rk3328-evb.dts | 23 ----------------------- > 2 files changed, 23 insertions(+), 23 deletions(-) > > diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi > index 5679897279aa..8ba53cf8f44b 100644 > --- a/arch/arm/dts/rk3328-evb-u-boot.dtsi > +++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi > @@ -7,6 +7,13 @@ > #include "rk3328-sdram-ddr3-666.dtsi" > > /{ > + gmac_clkin: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "gmac_clkin"; > + #clock-cells = <0>; > + }; > + > vcc5v0_host_xhci: vcc5v0-host-xhci-drv { > compatible = "regulator-fixed"; > enable-active-high; > @@ -17,6 +24,22 @@ > }; > }; > > +&gmac2io { > + phy-supply = <&vcc_phy>; > + phy-mode = "rgmii"; > + clock_in_out = "input"; > + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 50000>; > + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; > + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmiim1_pins>; > + tx_delay = <0x26>; > + rx_delay = <0x11>; > + status = "okay"; > +}; > + > &usb_host0_xhci { > vbus-supply = <&vcc5v0_host_xhci>; > status = "okay"; > diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts > index e9bc849f8c23..97bef37cf610 100644 > --- a/arch/arm/dts/rk3328-evb.dts > +++ b/arch/arm/dts/rk3328-evb.dts > @@ -14,13 +14,6 @@ > stdout-path = &uart2; > }; > > - gmac_clkin: external-gmac-clock { > - compatible = "fixed-clock"; > - clock-frequency = <125000000>; > - clock-output-names = "gmac_clkin"; > - #clock-cells = <0>; > - }; > - > vcc3v3_sdmmc: sdmmc-pwren { > compatible = "regulator-fixed"; > regulator-name = "vcc3v3"; > @@ -78,22 +71,6 @@ > status = "okay"; > }; > > -&gmac2io { > - phy-supply = <&vcc_phy>; > - phy-mode = "rgmii"; > - clock_in_out = "input"; > - snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - snps,reset-delays-us = <0 10000 50000>; > - assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; > - assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; > - pinctrl-names = "default"; > - pinctrl-0 = <&rgmiim1_pins>; > - tx_delay = <0x26>; > - rx_delay = <0x11>; > - status = "okay"; > -}; > - > &usb_host0_ehci { > status = "okay"; > };
diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi index 5679897279aa..8ba53cf8f44b 100644 --- a/arch/arm/dts/rk3328-evb-u-boot.dtsi +++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi @@ -7,6 +7,13 @@ #include "rk3328-sdram-ddr3-666.dtsi" /{ + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + vcc5v0_host_xhci: vcc5v0-host-xhci-drv { compatible = "regulator-fixed"; enable-active-high; @@ -17,6 +24,22 @@ }; }; +&gmac2io { + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; +}; + &usb_host0_xhci { vbus-supply = <&vcc5v0_host_xhci>; status = "okay"; diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts index e9bc849f8c23..97bef37cf610 100644 --- a/arch/arm/dts/rk3328-evb.dts +++ b/arch/arm/dts/rk3328-evb.dts @@ -14,13 +14,6 @@ stdout-path = &uart2; }; - gmac_clkin: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac_clkin"; - #clock-cells = <0>; - }; - vcc3v3_sdmmc: sdmmc-pwren { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; @@ -78,22 +71,6 @@ status = "okay"; }; -&gmac2io { - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; - assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmiim1_pins>; - tx_delay = <0x26>; - rx_delay = <0x11>; - status = "okay"; -}; - &usb_host0_ehci { status = "okay"; };