From patchwork Fri Mar 27 04:41:25 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chen-Yu Tsai X-Patchwork-Id: 244388 List-Id: U-Boot discussion From: wens at kernel.org (Chen-Yu Tsai) Date: Fri, 27 Mar 2020 12:41:25 +0800 Subject: [PATCH 1/6] rockchip: dts: rk3328-evb: Move vcc5v0-host-xhci-drv to -u-boot.dtsi In-Reply-To: <20200327044130.8763-1-wens@kernel.org> References: <20200327044130.8763-1-wens@kernel.org> Message-ID: <20200327044130.8763-2-wens@kernel.org> From: Chen-Yu Tsai USB 3.0 is only supported in U-boot, not in the Linux kernel where the device tree files are ultimately synced from. While the xhci node was moved, the external vbus regulator was not. Move it as well. Fixes: 2e91e2025c1b ("rockchip: rk3328: migrate u-boot node to -u-boot.dtsi") Signed-off-by: Chen-Yu Tsai Reviewed-by: Kever Yang --- arch/arm/dts/rk3328-evb-u-boot.dtsi | 11 +++++++++++ arch/arm/dts/rk3328-evb.dts | 9 --------- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi index 4a827063c555..5679897279aa 100644 --- a/arch/arm/dts/rk3328-evb-u-boot.dtsi +++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi @@ -6,6 +6,17 @@ #include "rk3328-u-boot.dtsi" #include "rk3328-sdram-ddr3-666.dtsi" +/{ + vcc5v0_host_xhci: vcc5v0-host-xhci-drv { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_host_xhci"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + &usb_host0_xhci { vbus-supply = <&vcc5v0_host_xhci>; status = "okay"; diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts index a2ee838fcd6b..e9bc849f8c23 100644 --- a/arch/arm/dts/rk3328-evb.dts +++ b/arch/arm/dts/rk3328-evb.dts @@ -38,15 +38,6 @@ regulator-max-microvolt = <5000000>; }; - vcc5v0_host_xhci: vcc5v0-host-xhci-drv { - compatible = "regulator-fixed"; - enable-active-high; - regulator-name = "vcc5v0_host_xhci"; - gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_phy";