From patchwork Thu Mar 26 21:00:44 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Vasut X-Patchwork-Id: 244344 List-Id: U-Boot discussion From: marex at denx.de (Marek Vasut) Date: Thu, 26 Mar 2020 22:00:44 +0100 Subject: [PATCH 2/2] ARM: dts: stm32: Repair SDMMC2 operation In-Reply-To: <20200326210044.418526-1-marex@denx.de> References: <20200326210044.418526-1-marex@denx.de> Message-ID: <20200326210044.418526-2-marex@denx.de> The eMMC uses different pinmux for the top four data lines, use such a pinmux, otherwise it takes a very long time until the test for 8bit operation times out. And this is the correct pinmux per schematic too. Signed-off-by: Marek Vasut Cc: Patrick Delaunay Cc: Patrice Chotard --- arch/arm/dts/stm32mp157a-avenger96.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts index 3065593bf2..e7505c7596 100644 --- a/arch/arm/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/dts/stm32mp157a-avenger96.dts @@ -310,7 +310,7 @@ &sdmmc2 { pinctrl-names = "default"; - pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; non-removable; no-sd; no-sdio;