From patchwork Wed Mar 25 18:44:51 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Vasut X-Patchwork-Id: 244278 List-Id: U-Boot discussion From: marex at denx.de (Marek Vasut) Date: Wed, 25 Mar 2020 19:44:51 +0100 Subject: [PATCH 02/12] net: ks8851: Remove RXQCR cache In-Reply-To: <20200325184501.200580-1-marex@denx.de> References: <20200325184501.200580-1-marex@denx.de> Message-ID: <20200325184501.200580-2-marex@denx.de> The cached RXQCR value is never updated, remove the cache and just use the bits in the cache directly in the code. Signed-off-by: Marek Vasut Cc: Eugen Hristev Cc: Joe Hershberger --- drivers/net/ks8851_mll.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c index 4386763bac..367ad2a397 100644 --- a/drivers/net/ks8851_mll.c +++ b/drivers/net/ks8851_mll.c @@ -49,7 +49,6 @@ union ks_tx_hdr { * @frame_cnt : number of frames received. * @bus_width : i/o bus width. * @irq : irq number assigned to this device. - * @rc_rxqcr : Cached copy of KS_RXQCR. * @rc_txcr : Cached copy of KS_TXCR. * @rc_ier : Cached copy of KS_IER. * @sharedbus : Multipex(addr and data bus) mode indicator. @@ -80,7 +79,6 @@ struct ks_net { u32 frame_cnt; int bus_width; int irq; - u16 rc_rxqcr; u16 rc_txcr; u16 rc_ier; u16 sharedbus; @@ -275,7 +273,7 @@ static inline void ks_read_qmu(struct eth_device *dev, u16 *buf, u32 len) /* 1. set sudo DMA mode */ ks_wrreg16(dev, KS_RXFDPR, RXFDPR_RXFPAI); - ks_wrreg8(dev, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff); + ks_wrreg8(dev, KS_RXQCR, RXQCR_CMD_CNTL | RXQCR_SDA); /* * 2. read prepend data @@ -293,7 +291,7 @@ static inline void ks_read_qmu(struct eth_device *dev, u16 *buf, u32 len) ks_inblk(dev, buf, ALIGN(len, 4)); /* 4. reset sudo DMA Mode */ - ks_wrreg8(dev, KS_RXQCR, (ks->rc_rxqcr & ~RXQCR_SDA) & 0xff); + ks_wrreg8(dev, KS_RXQCR, RXQCR_CMD_CNTL); } static void ks_rcv(struct eth_device *dev, uchar **pv_data) @@ -324,7 +322,7 @@ static void ks_rcv(struct eth_device *dev, uchar **pv_data) net_process_received_packet(*pv_data, frame_hdr->len); pv_data++; } else { - ks_wrreg16(dev, KS_RXQCR, (ks->rc_rxqcr | RXQCR_RRXEF)); + ks_wrreg16(dev, KS_RXQCR, RXQCR_CMD_CNTL | RXQCR_RRXEF); printf(DRIVERNAME ": bad packet\n"); } frame_hdr++; @@ -379,8 +377,7 @@ static void ks_setup(struct eth_device *dev) ks_wrreg16(dev, KS_RXFCTR, 1 & RXFCTR_THRESHOLD_MASK); /* Setup RxQ Command Control (RXQCR) */ - ks->rc_rxqcr = RXQCR_CMD_CNTL; - ks_wrreg16(dev, KS_RXQCR, ks->rc_rxqcr); + ks_wrreg16(dev, KS_RXQCR, RXQCR_CMD_CNTL); /* * set the force mode to half duplex, default is full duplex @@ -519,13 +516,13 @@ static void ks_write_qmu(struct eth_device *dev, u8 *pdata, u16 len) /* 1. set sudo-DMA mode */ ks_wrreg16(dev, KS_TXFDPR, TXFDPR_TXFPAI); - ks_wrreg8(dev, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff); + ks_wrreg8(dev, KS_RXQCR, RXQCR_CMD_CNTL | RXQCR_SDA); /* 2. write status/lenth info */ ks_outblk(dev, ks->txh.txw, 4); /* 3. write pkt data */ ks_outblk(dev, (u16 *)pdata, ALIGN(len, 4)); /* 4. reset sudo-DMA mode */ - ks_wrreg8(dev, KS_RXQCR, (ks->rc_rxqcr & ~RXQCR_SDA) & 0xff); + ks_wrreg8(dev, KS_RXQCR, RXQCR_CMD_CNTL); /* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */ ks_wrreg16(dev, KS_TXQCR, TXQCR_METFE); /* 6. wait until TXQCR_METFE is auto-cleared */