@@ -158,6 +158,9 @@ bool spi_mem_default_supports_op(struct spi_slave *slave,
op->data.dir == SPI_MEM_DATA_OUT))
return false;
+ if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
+ return false;
+
return true;
}
EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
@@ -72,6 +72,7 @@ enum spi_mem_data_dir {
* struct spi_mem_op - describes a SPI memory operation
* @cmd.buswidth: number of IO lines used to transmit the command
* @cmd.opcode: operation opcode
+ * @cmd.dtr: whether the command opcode should be sent in DTR mode or not
* @addr.nbytes: number of address bytes to send. Can be zero if the operation
* does not need to send an address
* @addr.buswidth: number of IO lines used to transmit the address cycles
@@ -79,10 +80,13 @@ enum spi_mem_data_dir {
* Note that only @addr.nbytes are taken into account in this
* address value, so users should make sure the value fits in the
* assigned number of bytes.
+ * @addr.dtr: whether the address should be sent in DTR mode or not
* @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can
* be zero if the operation does not require dummy bytes
* @dummy.buswidth: number of IO lanes used to transmit the dummy bytes
+ * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or not
* @data.buswidth: number of IO lanes used to send/receive the data
+ * @data.dtr: whether the data should be sent in DTR mode or not
* @data.dir: direction of the transfer
* @data.buf.in: input buffer
* @data.buf.out: output buffer
@@ -91,21 +95,25 @@ struct spi_mem_op {
struct {
u8 buswidth;
u8 opcode;
+ u8 dtr : 1;
} cmd;
struct {
u8 nbytes;
u8 buswidth;
+ u8 dtr : 1;
u64 val;
} addr;
struct {
u8 nbytes;
u8 buswidth;
+ u8 dtr : 1;
} dummy;
struct {
u8 buswidth;
+ u8 dtr : 1;
enum spi_mem_data_dir dir;
unsigned int nbytes;
/* buf.{in,out} must be DMA-able. */
Each phase is given a separate 'dtr' field so mixed protocols like 4S-4D-4D can be supported. Signed-off-by: Pratyush Yadav <p.yadav at ti.com> --- drivers/spi/spi-mem.c | 3 +++ include/spi-mem.h | 8 ++++++++ 2 files changed, 11 insertions(+)