diff mbox series

[v2,1/2] arm: mvebu: clearfog: add SCSI to distro bootcmd

Message ID 20200323172632.206912-1-mrjoel@lixil.net
State Accepted
Commit bd02fd29f996f90308d54632da767e586f6c1b44
Headers show
Series [v2,1/2] arm: mvebu: clearfog: add SCSI to distro bootcmd | expand

Commit Message

Joel Johnson March 23, 2020, 5:26 p.m. UTC 
Include attempting to boot from SCSI (SATA) devices within generated
board distro bootcmd environment. The reasoning for boot ordering is
that MMC and USB are external and removable, while when a case is in
use, replacing M.2 or mSATA drives requires disassembly. Therefore,
to boot SCSI, [bootable] external media must be removed. If SCSI were
placed before MMC or USB, then removing a bootable SCSI drive to
enable MMC or USB booting would be more difficult.

Signed-off-by: Joel Johnson <mrjoel at lixil.net>
Reviewed-by: Stefan Roese <sr at denx.de>

---

v2 changes
  - none

---
 include/configs/clearfog.h | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 633187d86f..a452f4b009 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -110,9 +110,16 @@ 
 #define BOOT_TARGET_DEVICES_USB(func)
 #endif
 
+#ifdef CONFIG_SCSI
+#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
+#else
+#define BOOT_TARGET_DEVICES_SCSI(func)
+#endif
+
 #define BOOT_TARGET_DEVICES(func) \
 	BOOT_TARGET_DEVICES_MMC(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
+	BOOT_TARGET_DEVICES_SCSI(func) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)