From patchwork Fri Mar 20 06:37:06 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andy Tang X-Patchwork-Id: 243991 List-Id: U-Boot discussion From: andy.tang at nxp.com (andy.tang at nxp.com) Date: Fri, 20 Mar 2020 14:37:06 +0800 Subject: [PATCH 1/2 v2] armv8: ls1028aqds: add some environments Message-ID: <20200320063707.18622-1-andy.tang@nxp.com> From: Yuantian Tang Add sd and emmc bootcmd environments to facilitate the boot process. Signed-off-by: Yuantian Tang --- v2: - updated some variable slightly. include/configs/ls1028aqds.h | 39 ++++++++++++++++++++++++++++----------- 1 file changed, 28 insertions(+), 11 deletions(-) diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index b3c1242..5843274 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -108,6 +108,7 @@ "load_addr=0xa0000000\0" \ "kernel_addr_r=0x81000000\0" \ "fdt_addr_r=0x90000000\0" \ + "fdt2_addr_r=0x90010000\0" \ "ramdisk_addr_r=0xa0000000\0" \ "kernel_start=0x1000000\0" \ "kernelheader_start=0x800000\0" \ @@ -148,19 +149,35 @@ "${scripthdraddr} ${prefix}${boot_script_hdr} " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ - "sd_bootcmd=echo Trying load from SD ..;" \ - "mmcinfo; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ + "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \ + "sf probe 0:0 && sf read $load_addr " \ + "$kernel_start $kernel_size ; env exists secureboot &&" \ + "sf read $kernelheader_addr_r $kernelheader_start " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ + " bootm $load_addr#$board\0" \ + "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \ + "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \ + "&& hdp load $load_addr 0x2000\0" \ + "sd_bootcmd=echo Trying load from SD ...;" \ + "mmc dev 0; mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "emmc_bootcmd=echo Trying load from EMMC ..;" \ - "mmcinfo; mmc dev 1; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \ + "mmc dev 0;mmcinfo; mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" \ + "emmc_bootcmd=echo Trying load from EMMC ..;" \ + "mmc dev 1; mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" + "bootm $load_addr#$board\0" \ + "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \ + "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" + #endif #endif /* __LS1028A_QDS_H */