diff mbox series

[v2,06/14] arm: dts: lx2160a: add external MDIO nodes

Message ID 20200318144749.25509-7-ioana.ciornei@nxp.com
State Accepted
Commit 8d3495023880f2076b2853c76c6ffc9bfbc2327e
Headers show
Series net: ldpaa_eth: transition to CONFIG_DM_ETH | expand

Commit Message

Ioana Ciornei March 18, 2020, 2:47 p.m. UTC 
Add the External MDIO device nodes found in the WRIOP global memory
region. This is needed for management of external PHYs.

Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
---
Changes in v2:
 - none

 arch/arm/dts/fsl-lx2160a.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
index 42ce4379eceb..15f18bc4a5f7 100644
--- a/arch/arm/dts/fsl-lx2160a.dtsi
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -363,4 +363,24 @@ 
 		bus-range = <0x0 0xff>;
 		ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>;
 	};
+
+	/* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
+	emdio1: mdio at 8b96000 {
+		compatible = "fsl,ls-mdio";
+		reg = <0x0 0x8b96000 0x0 0x1000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	/* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */
+	emdio2: mdio at 8b97000 {
+		compatible = "fsl,ls-mdio";
+		reg = <0x0 0x8b97000 0x0 0x1000>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };