| Message ID | 20200317211946.28062-4-atish.patra@wdc.com |
|---|---|
| State | New |
| Headers | show |
| Series | DT related fixes for RISC-V UEFI | expand |
On Wed, Mar 18, 2020 at 5:19 AM Atish Patra <atish.patra at wdc.com> wrote: > > In RISC-V, M-mode software can reserve physical memory regions > by setting appropriate physical memory protection (PMP) csr. As the > PMP csr are accessible only in M-mode, S-mode U-Boot can not read > this configuration directly. However, M-mode software can pass this > information via reserved-memory node in device tree so that S-mode > software can access this information. > > This patch provides a framework to copy to the reserved-memory node > from one DT to another. This will be used to update the DT used by > U-Boot and the DT passed to the next stage OS. > > Signed-off-by: Atish Patra <atish.patra at wdc.com> > --- > arch/riscv/cpu/start.S | 1 + > arch/riscv/include/asm/global_data.h | 1 + > arch/riscv/include/asm/u-boot-riscv.h | 1 + > arch/riscv/lib/asm-offsets.c | 1 + > arch/riscv/lib/bootm.c | 68 +++++++++++++++++++++++++++ > 5 files changed, 72 insertions(+) > > diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S > index 6b3ff99c3882..0282685c2906 100644 > --- a/arch/riscv/cpu/start.S > +++ b/arch/riscv/cpu/start.S > @@ -121,6 +121,7 @@ call_board_init_f_0: > > jal board_init_f_init_reserve > > + SREG s1, GD_FIRMWARE_FDT_ADDR(gp) > /* save the boot hart id to global_data */ > SREG tp, GD_BOOT_HART(gp) > > diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h > index b74bd7e738bb..51ac8d1c98e2 100644 > --- a/arch/riscv/include/asm/global_data.h > +++ b/arch/riscv/include/asm/global_data.h > @@ -15,6 +15,7 @@ > /* Architecture-specific global data */ > struct arch_global_data { > long boot_hart; /* boot hart id */ > + phys_addr_t firmware_fdt_addr; > #ifdef CONFIG_SIFIVE_CLINT > void __iomem *clint; /* clint base address */ > #endif > diff --git a/arch/riscv/include/asm/u-boot-riscv.h b/arch/riscv/include/asm/u-boot-riscv.h > index 49febd588102..b7bea0ba184d 100644 > --- a/arch/riscv/include/asm/u-boot-riscv.h > +++ b/arch/riscv/include/asm/u-boot-riscv.h > @@ -17,5 +17,6 @@ int cleanup_before_linux(void); > /* board/.../... */ > int board_init(void); > void board_quiesce_devices(void); > +int riscv_board_reserved_mem_fixup(void *fdt); > > #endif /* _U_BOOT_RISCV_H_ */ > diff --git a/arch/riscv/lib/asm-offsets.c b/arch/riscv/lib/asm-offsets.c > index 4fa4fd371473..7301c1b98e23 100644 > --- a/arch/riscv/lib/asm-offsets.c > +++ b/arch/riscv/lib/asm-offsets.c > @@ -14,6 +14,7 @@ > int main(void) > { > DEFINE(GD_BOOT_HART, offsetof(gd_t, arch.boot_hart)); > + DEFINE(GD_FIRMWARE_FDT_ADDR, offsetof(gd_t, arch.firmware_fdt_addr)); > #ifndef CONFIG_XIP > DEFINE(GD_AVAILABLE_HARTS, offsetof(gd_t, arch.available_harts)); > #endif > diff --git a/arch/riscv/lib/bootm.c b/arch/riscv/lib/bootm.c > index f927694ae32f..5e907e96701c 100644 > --- a/arch/riscv/lib/bootm.c > +++ b/arch/riscv/lib/bootm.c > @@ -19,6 +19,7 @@ > #include <dm/device.h> > #include <dm/root.h> > #include <u-boot/zlib.h> > +#include <mapmem.h> > > DECLARE_GLOBAL_DATA_PTR; > > @@ -26,6 +27,73 @@ __weak void board_quiesce_devices(void) > { > } > > +int riscv_fdt_copy_resv_mem_node(const void *src, void *dst) We probably need find a better place for this routine, see below comments for riscv_board_reserved_mem_fixup(). We need make this routine public in u-boot-riscv.h as well. > +{ > + uint32_t phandle; > + struct fdt_memory pmp_mem; > + fdt_addr_t addr; > + fdt_size_t size; > + int offset, node, err, rmem_offset; > + bool nomap = false; > + char basename[32] = {0}; > + int bname_len; > + int max_len = sizeof(basename); > + const char *name; > + char *temp; > + > + offset = fdt_path_offset(src, "/reserved-memory"); > + if (offset < 0) { > + printf("No reserved memory region found in source FDT\n"); > + return 0; > + } > + > + fdt_for_each_subnode(node, src, offset) { > + name = fdt_get_name(src, node, NULL); > + > + addr = fdtdec_get_addr_size_auto_noparent(src, node, > + "reg", 0, &size, > + true); > + if (addr == FDT_ADDR_T_NONE) { > + debug("failed to read address/size for %s\n", name); > + continue; > + } > + strncpy(basename, name, max_len); > + temp = strchr(basename, '@'); > + if (temp) { > + bname_len = strnlen(basename, max_len) - strnlen(temp, > + max_len); > + *(basename+bname_len) = '\0'; nits: need space around + > + } > + pmp_mem.start = addr; > + pmp_mem.end = addr + size; > + err = fdtdec_add_reserved_memory(dst, basename, &pmp_mem, > + &phandle); > + if (err < 0) { > + printf("failed to add reserved memory: %d\n", err); > + return err; > + } > + rmem_offset = fdt_node_offset_by_phandle(dst, phandle); nits: this line can be put in the "if (nomap)" block below > + nomap = fdt_get_property(src, node, "no-map", NULL); > + if (nomap) > + fdt_setprop_empty(dst, rmem_offset, "no-map"); > + } > + > + return 0; > +} > + > +int riscv_board_reserved_mem_fixup(void *fdt) This routine should not be put to boom.c as it's nothing related to bootm. Maybe arch/riscv/lib/fdt.c ? > +{ > + int err; > + void *src_fdt_addr; > + > + src_fdt_addr = map_sysmem(gd->arch.firmware_fdt_addr, 0); > + err = riscv_fdt_copy_resv_mem_node(src_fdt_addr, fdt); > + if (err < 0) > + return err; > + > + return 0; > +} > + > int arch_fixup_fdt(void *blob) > { > u32 size; > -- > 2.25.1 >
On Thu, Mar 19, 2020 at 7:31 AM Bin Meng <bmeng.cn at gmail.com> wrote: > > On Wed, Mar 18, 2020 at 5:19 AM Atish Patra <atish.patra at wdc.com> wrote: > > > > In RISC-V, M-mode software can reserve physical memory regions > > by setting appropriate physical memory protection (PMP) csr. As the > > PMP csr are accessible only in M-mode, S-mode U-Boot can not read > > this configuration directly. However, M-mode software can pass this > > information via reserved-memory node in device tree so that S-mode > > software can access this information. > > > > This patch provides a framework to copy to the reserved-memory node > > from one DT to another. This will be used to update the DT used by > > U-Boot and the DT passed to the next stage OS. > > > > Signed-off-by: Atish Patra <atish.patra at wdc.com> > > --- > > arch/riscv/cpu/start.S | 1 + > > arch/riscv/include/asm/global_data.h | 1 + > > arch/riscv/include/asm/u-boot-riscv.h | 1 + > > arch/riscv/lib/asm-offsets.c | 1 + > > arch/riscv/lib/bootm.c | 68 +++++++++++++++++++++++++++ > > 5 files changed, 72 insertions(+) > > > > diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S > > index 6b3ff99c3882..0282685c2906 100644 > > --- a/arch/riscv/cpu/start.S > > +++ b/arch/riscv/cpu/start.S > > @@ -121,6 +121,7 @@ call_board_init_f_0: > > > > jal board_init_f_init_reserve > > > > + SREG s1, GD_FIRMWARE_FDT_ADDR(gp) > > /* save the boot hart id to global_data */ > > SREG tp, GD_BOOT_HART(gp) > > > > diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h > > index b74bd7e738bb..51ac8d1c98e2 100644 > > --- a/arch/riscv/include/asm/global_data.h > > +++ b/arch/riscv/include/asm/global_data.h > > @@ -15,6 +15,7 @@ > > /* Architecture-specific global data */ > > struct arch_global_data { > > long boot_hart; /* boot hart id */ > > + phys_addr_t firmware_fdt_addr; > > #ifdef CONFIG_SIFIVE_CLINT > > void __iomem *clint; /* clint base address */ > > #endif > > diff --git a/arch/riscv/include/asm/u-boot-riscv.h b/arch/riscv/include/asm/u-boot-riscv.h > > index 49febd588102..b7bea0ba184d 100644 > > --- a/arch/riscv/include/asm/u-boot-riscv.h > > +++ b/arch/riscv/include/asm/u-boot-riscv.h > > @@ -17,5 +17,6 @@ int cleanup_before_linux(void); > > /* board/.../... */ > > int board_init(void); > > void board_quiesce_devices(void); > > +int riscv_board_reserved_mem_fixup(void *fdt); > > > > #endif /* _U_BOOT_RISCV_H_ */ > > diff --git a/arch/riscv/lib/asm-offsets.c b/arch/riscv/lib/asm-offsets.c > > index 4fa4fd371473..7301c1b98e23 100644 > > --- a/arch/riscv/lib/asm-offsets.c > > +++ b/arch/riscv/lib/asm-offsets.c > > @@ -14,6 +14,7 @@ > > int main(void) > > { > > DEFINE(GD_BOOT_HART, offsetof(gd_t, arch.boot_hart)); > > + DEFINE(GD_FIRMWARE_FDT_ADDR, offsetof(gd_t, arch.firmware_fdt_addr)); > > #ifndef CONFIG_XIP > > DEFINE(GD_AVAILABLE_HARTS, offsetof(gd_t, arch.available_harts)); > > #endif > > diff --git a/arch/riscv/lib/bootm.c b/arch/riscv/lib/bootm.c > > index f927694ae32f..5e907e96701c 100644 > > --- a/arch/riscv/lib/bootm.c > > +++ b/arch/riscv/lib/bootm.c > > @@ -19,6 +19,7 @@ > > #include <dm/device.h> > > #include <dm/root.h> > > #include <u-boot/zlib.h> > > +#include <mapmem.h> > > > > DECLARE_GLOBAL_DATA_PTR; > > > > @@ -26,6 +27,73 @@ __weak void board_quiesce_devices(void) > > { > > } > > > > +int riscv_fdt_copy_resv_mem_node(const void *src, void *dst) > > We probably need find a better place for this routine, see below > comments for riscv_board_reserved_mem_fixup(). > > We need make this routine public in u-boot-riscv.h as well. > > > +{ > > + uint32_t phandle; > > + struct fdt_memory pmp_mem; > > + fdt_addr_t addr; > > + fdt_size_t size; > > + int offset, node, err, rmem_offset; > > + bool nomap = false; > > + char basename[32] = {0}; > > + int bname_len; > > + int max_len = sizeof(basename); > > + const char *name; > > + char *temp; > > + > > + offset = fdt_path_offset(src, "/reserved-memory"); > > + if (offset < 0) { > > + printf("No reserved memory region found in source FDT\n"); > > + return 0; > > + } > > + > > + fdt_for_each_subnode(node, src, offset) { > > + name = fdt_get_name(src, node, NULL); > > + > > + addr = fdtdec_get_addr_size_auto_noparent(src, node, > > + "reg", 0, &size, > > + true); > > + if (addr == FDT_ADDR_T_NONE) { > > + debug("failed to read address/size for %s\n", name); > > + continue; > > + } > > + strncpy(basename, name, max_len); > > + temp = strchr(basename, '@'); > > + if (temp) { > > + bname_len = strnlen(basename, max_len) - strnlen(temp, > > + max_len); > > + *(basename+bname_len) = '\0'; > > nits: need space around + > sure. > > + } > > + pmp_mem.start = addr; > > + pmp_mem.end = addr + size; > > + err = fdtdec_add_reserved_memory(dst, basename, &pmp_mem, > > + &phandle); > > + if (err < 0) { > > + printf("failed to add reserved memory: %d\n", err); > > + return err; > > + } > > + rmem_offset = fdt_node_offset_by_phandle(dst, phandle); > > nits: this line can be put in the "if (nomap)" block below > sure. > > + nomap = fdt_get_property(src, node, "no-map", NULL); > > + if (nomap) > > + fdt_setprop_empty(dst, rmem_offset, "no-map"); > > + } > > + > > + return 0; > > +} > > + > > +int riscv_board_reserved_mem_fixup(void *fdt) > > This routine should not be put to boom.c as it's nothing related to > bootm. Maybe arch/riscv/lib/fdt.c ? > I wanted to keep all the fdt fixups together as arch_fixup_fdt was already defined in bootm.c But I agree with your point that it is not related to bootm. I think we can move all the fdt fixups including arch_fixup_fdt to arch/riscv/lib/fdt_fixup.c. Thoughts ? > > > > +{ > > + int err; > > + void *src_fdt_addr; > > + > > + src_fdt_addr = map_sysmem(gd->arch.firmware_fdt_addr, 0); > > + err = riscv_fdt_copy_resv_mem_node(src_fdt_addr, fdt); > > + if (err < 0) > > + return err; > > + > > + return 0; > > +} > > + > > int arch_fixup_fdt(void *blob) > > { > > u32 size; > > -- > > 2.25.1 > >
On Fri, Mar 20, 2020 at 4:46 AM Atish Patra <atishp at atishpatra.org> wrote: > > On Thu, Mar 19, 2020 at 7:31 AM Bin Meng <bmeng.cn at gmail.com> wrote: > > > > On Wed, Mar 18, 2020 at 5:19 AM Atish Patra <atish.patra at wdc.com> wrote: > > > > > > In RISC-V, M-mode software can reserve physical memory regions > > > by setting appropriate physical memory protection (PMP) csr. As the > > > PMP csr are accessible only in M-mode, S-mode U-Boot can not read > > > this configuration directly. However, M-mode software can pass this > > > information via reserved-memory node in device tree so that S-mode > > > software can access this information. > > > > > > This patch provides a framework to copy to the reserved-memory node > > > from one DT to another. This will be used to update the DT used by > > > U-Boot and the DT passed to the next stage OS. > > > > > > Signed-off-by: Atish Patra <atish.patra at wdc.com> > > > --- > > > arch/riscv/cpu/start.S | 1 + > > > arch/riscv/include/asm/global_data.h | 1 + > > > arch/riscv/include/asm/u-boot-riscv.h | 1 + > > > arch/riscv/lib/asm-offsets.c | 1 + > > > arch/riscv/lib/bootm.c | 68 +++++++++++++++++++++++++++ > > > 5 files changed, 72 insertions(+) > > > > > > diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S > > > index 6b3ff99c3882..0282685c2906 100644 > > > --- a/arch/riscv/cpu/start.S > > > +++ b/arch/riscv/cpu/start.S > > > @@ -121,6 +121,7 @@ call_board_init_f_0: > > > > > > jal board_init_f_init_reserve > > > > > > + SREG s1, GD_FIRMWARE_FDT_ADDR(gp) > > > /* save the boot hart id to global_data */ > > > SREG tp, GD_BOOT_HART(gp) > > > > > > diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h > > > index b74bd7e738bb..51ac8d1c98e2 100644 > > > --- a/arch/riscv/include/asm/global_data.h > > > +++ b/arch/riscv/include/asm/global_data.h > > > @@ -15,6 +15,7 @@ > > > /* Architecture-specific global data */ > > > struct arch_global_data { > > > long boot_hart; /* boot hart id */ > > > + phys_addr_t firmware_fdt_addr; > > > #ifdef CONFIG_SIFIVE_CLINT > > > void __iomem *clint; /* clint base address */ > > > #endif > > > diff --git a/arch/riscv/include/asm/u-boot-riscv.h b/arch/riscv/include/asm/u-boot-riscv.h > > > index 49febd588102..b7bea0ba184d 100644 > > > --- a/arch/riscv/include/asm/u-boot-riscv.h > > > +++ b/arch/riscv/include/asm/u-boot-riscv.h > > > @@ -17,5 +17,6 @@ int cleanup_before_linux(void); > > > /* board/.../... */ > > > int board_init(void); > > > void board_quiesce_devices(void); > > > +int riscv_board_reserved_mem_fixup(void *fdt); > > > > > > #endif /* _U_BOOT_RISCV_H_ */ > > > diff --git a/arch/riscv/lib/asm-offsets.c b/arch/riscv/lib/asm-offsets.c > > > index 4fa4fd371473..7301c1b98e23 100644 > > > --- a/arch/riscv/lib/asm-offsets.c > > > +++ b/arch/riscv/lib/asm-offsets.c > > > @@ -14,6 +14,7 @@ > > > int main(void) > > > { > > > DEFINE(GD_BOOT_HART, offsetof(gd_t, arch.boot_hart)); > > > + DEFINE(GD_FIRMWARE_FDT_ADDR, offsetof(gd_t, arch.firmware_fdt_addr)); > > > #ifndef CONFIG_XIP > > > DEFINE(GD_AVAILABLE_HARTS, offsetof(gd_t, arch.available_harts)); > > > #endif > > > diff --git a/arch/riscv/lib/bootm.c b/arch/riscv/lib/bootm.c > > > index f927694ae32f..5e907e96701c 100644 > > > --- a/arch/riscv/lib/bootm.c > > > +++ b/arch/riscv/lib/bootm.c > > > @@ -19,6 +19,7 @@ > > > #include <dm/device.h> > > > #include <dm/root.h> > > > #include <u-boot/zlib.h> > > > +#include <mapmem.h> > > > > > > DECLARE_GLOBAL_DATA_PTR; > > > > > > @@ -26,6 +27,73 @@ __weak void board_quiesce_devices(void) > > > { > > > } > > > > > > +int riscv_fdt_copy_resv_mem_node(const void *src, void *dst) > > > > We probably need find a better place for this routine, see below > > comments for riscv_board_reserved_mem_fixup(). > > > > We need make this routine public in u-boot-riscv.h as well. > > > > > +{ > > > + uint32_t phandle; > > > + struct fdt_memory pmp_mem; > > > + fdt_addr_t addr; > > > + fdt_size_t size; > > > + int offset, node, err, rmem_offset; > > > + bool nomap = false; > > > + char basename[32] = {0}; > > > + int bname_len; > > > + int max_len = sizeof(basename); > > > + const char *name; > > > + char *temp; > > > + > > > + offset = fdt_path_offset(src, "/reserved-memory"); > > > + if (offset < 0) { > > > + printf("No reserved memory region found in source FDT\n"); > > > + return 0; > > > + } > > > + > > > + fdt_for_each_subnode(node, src, offset) { > > > + name = fdt_get_name(src, node, NULL); > > > + > > > + addr = fdtdec_get_addr_size_auto_noparent(src, node, > > > + "reg", 0, &size, > > > + true); > > > + if (addr == FDT_ADDR_T_NONE) { > > > + debug("failed to read address/size for %s\n", name); > > > + continue; > > > + } > > > + strncpy(basename, name, max_len); > > > + temp = strchr(basename, '@'); > > > + if (temp) { > > > + bname_len = strnlen(basename, max_len) - strnlen(temp, > > > + max_len); > > > + *(basename+bname_len) = '\0'; > > > > nits: need space around + > > > sure. > > > > + } > > > + pmp_mem.start = addr; > > > + pmp_mem.end = addr + size; > > > + err = fdtdec_add_reserved_memory(dst, basename, &pmp_mem, > > > + &phandle); > > > + if (err < 0) { > > > + printf("failed to add reserved memory: %d\n", err); > > > + return err; > > > + } > > > + rmem_offset = fdt_node_offset_by_phandle(dst, phandle); > > > > nits: this line can be put in the "if (nomap)" block below > > > > sure. > > > > + nomap = fdt_get_property(src, node, "no-map", NULL); > > > + if (nomap) > > > + fdt_setprop_empty(dst, rmem_offset, "no-map"); > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +int riscv_board_reserved_mem_fixup(void *fdt) > > > > This routine should not be put to boom.c as it's nothing related to > > bootm. Maybe arch/riscv/lib/fdt.c ? > > > > I wanted to keep all the fdt fixups together as arch_fixup_fdt was > already defined in bootm.c > But I agree with your point that it is not related to bootm. I think > we can move all the fdt fixups > including arch_fixup_fdt to arch/riscv/lib/fdt_fixup.c. Thoughts ? > Sounds good to me. Regards, Bin
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index 6b3ff99c3882..0282685c2906 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -121,6 +121,7 @@ call_board_init_f_0: jal board_init_f_init_reserve + SREG s1, GD_FIRMWARE_FDT_ADDR(gp) /* save the boot hart id to global_data */ SREG tp, GD_BOOT_HART(gp) diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h index b74bd7e738bb..51ac8d1c98e2 100644 --- a/arch/riscv/include/asm/global_data.h +++ b/arch/riscv/include/asm/global_data.h @@ -15,6 +15,7 @@ /* Architecture-specific global data */ struct arch_global_data { long boot_hart; /* boot hart id */ + phys_addr_t firmware_fdt_addr; #ifdef CONFIG_SIFIVE_CLINT void __iomem *clint; /* clint base address */ #endif diff --git a/arch/riscv/include/asm/u-boot-riscv.h b/arch/riscv/include/asm/u-boot-riscv.h index 49febd588102..b7bea0ba184d 100644 --- a/arch/riscv/include/asm/u-boot-riscv.h +++ b/arch/riscv/include/asm/u-boot-riscv.h @@ -17,5 +17,6 @@ int cleanup_before_linux(void); /* board/.../... */ int board_init(void); void board_quiesce_devices(void); +int riscv_board_reserved_mem_fixup(void *fdt); #endif /* _U_BOOT_RISCV_H_ */ diff --git a/arch/riscv/lib/asm-offsets.c b/arch/riscv/lib/asm-offsets.c index 4fa4fd371473..7301c1b98e23 100644 --- a/arch/riscv/lib/asm-offsets.c +++ b/arch/riscv/lib/asm-offsets.c @@ -14,6 +14,7 @@ int main(void) { DEFINE(GD_BOOT_HART, offsetof(gd_t, arch.boot_hart)); + DEFINE(GD_FIRMWARE_FDT_ADDR, offsetof(gd_t, arch.firmware_fdt_addr)); #ifndef CONFIG_XIP DEFINE(GD_AVAILABLE_HARTS, offsetof(gd_t, arch.available_harts)); #endif diff --git a/arch/riscv/lib/bootm.c b/arch/riscv/lib/bootm.c index f927694ae32f..5e907e96701c 100644 --- a/arch/riscv/lib/bootm.c +++ b/arch/riscv/lib/bootm.c @@ -19,6 +19,7 @@ #include <dm/device.h> #include <dm/root.h> #include <u-boot/zlib.h> +#include <mapmem.h> DECLARE_GLOBAL_DATA_PTR; @@ -26,6 +27,73 @@ __weak void board_quiesce_devices(void) { } +int riscv_fdt_copy_resv_mem_node(const void *src, void *dst) +{ + uint32_t phandle; + struct fdt_memory pmp_mem; + fdt_addr_t addr; + fdt_size_t size; + int offset, node, err, rmem_offset; + bool nomap = false; + char basename[32] = {0}; + int bname_len; + int max_len = sizeof(basename); + const char *name; + char *temp; + + offset = fdt_path_offset(src, "/reserved-memory"); + if (offset < 0) { + printf("No reserved memory region found in source FDT\n"); + return 0; + } + + fdt_for_each_subnode(node, src, offset) { + name = fdt_get_name(src, node, NULL); + + addr = fdtdec_get_addr_size_auto_noparent(src, node, + "reg", 0, &size, + true); + if (addr == FDT_ADDR_T_NONE) { + debug("failed to read address/size for %s\n", name); + continue; + } + strncpy(basename, name, max_len); + temp = strchr(basename, '@'); + if (temp) { + bname_len = strnlen(basename, max_len) - strnlen(temp, + max_len); + *(basename+bname_len) = '\0'; + } + pmp_mem.start = addr; + pmp_mem.end = addr + size; + err = fdtdec_add_reserved_memory(dst, basename, &pmp_mem, + &phandle); + if (err < 0) { + printf("failed to add reserved memory: %d\n", err); + return err; + } + rmem_offset = fdt_node_offset_by_phandle(dst, phandle); + nomap = fdt_get_property(src, node, "no-map", NULL); + if (nomap) + fdt_setprop_empty(dst, rmem_offset, "no-map"); + } + + return 0; +} + +int riscv_board_reserved_mem_fixup(void *fdt) +{ + int err; + void *src_fdt_addr; + + src_fdt_addr = map_sysmem(gd->arch.firmware_fdt_addr, 0); + err = riscv_fdt_copy_resv_mem_node(src_fdt_addr, fdt); + if (err < 0) + return err; + + return 0; +} + int arch_fixup_fdt(void *blob) { u32 size;
In RISC-V, M-mode software can reserve physical memory regions by setting appropriate physical memory protection (PMP) csr. As the PMP csr are accessible only in M-mode, S-mode U-Boot can not read this configuration directly. However, M-mode software can pass this information via reserved-memory node in device tree so that S-mode software can access this information. This patch provides a framework to copy to the reserved-memory node from one DT to another. This will be used to update the DT used by U-Boot and the DT passed to the next stage OS. Signed-off-by: Atish Patra <atish.patra at wdc.com> --- arch/riscv/cpu/start.S | 1 + arch/riscv/include/asm/global_data.h | 1 + arch/riscv/include/asm/u-boot-riscv.h | 1 + arch/riscv/lib/asm-offsets.c | 1 + arch/riscv/lib/bootm.c | 68 +++++++++++++++++++++++++++ 5 files changed, 72 insertions(+)