From patchwork Wed Mar 11 07:03:15 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pragnesh Patel X-Patchwork-Id: 243511 List-Id: U-Boot discussion From: pragnesh.patel at sifive.com (Pragnesh Patel) Date: Wed, 11 Mar 2020 12:33:15 +0530 Subject: [PATCH v5 09/14] clk: sifive: fu540-prci: Add clock initialization for SPL In-Reply-To: <20200311070320.21323-1-pragnesh.patel@sifive.com> References: <20200311070320.21323-1-pragnesh.patel@sifive.com> Message-ID: <20200311070320.21323-10-pragnesh.patel@sifive.com> Set corepll, ddrpll and ethernet PLL for u-boot-spl Signed-off-by: Pragnesh Patel --- drivers/clk/sifive/fu540-prci.c | 94 +++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c index c02c0466a8..f043b0eccb 100644 --- a/drivers/clk/sifive/fu540-prci.c +++ b/drivers/clk/sifive/fu540-prci.c @@ -41,6 +41,10 @@ #include #include +#define DDRCTLPLL_F 55 +#define DDRCTLPLL_Q 2 +#define MHz 1000000 + /* * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects: * hfclk and rtcclk @@ -152,6 +156,27 @@ #define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \ (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT) +/* PROCMONCFG */ +#define PRCI_PROCMONCFG_OFFSET 0xF0 +#define PRCI_PROCMONCFG_CORE_CLOCK_SHIFT 24 +#define PRCI_PROCMONCFG_CORE_CLOCK_MASK \ + (0x1 << PRCI_PROCMONCFG_CORE_CLOCK_SHIFT) + +#define PLL_R(x) \ + ((x) << PRCI_DDRPLLCFG0_DIVR_SHIFT) & PRCI_DDRPLLCFG0_DIVR_MASK +#define PLL_F(x) \ + ((x) << PRCI_DDRPLLCFG0_DIVF_SHIFT) & PRCI_DDRPLLCFG0_DIVF_MASK +#define PLL_Q(x) \ + ((x) << PRCI_DDRPLLCFG0_DIVQ_SHIFT) & PRCI_DDRPLLCFG0_DIVQ_MASK +#define PLL_RANGE(x) \ + ((x) << PRCI_DDRPLLCFG0_RANGE_SHIFT) & PRCI_DDRPLLCFG0_RANGE_MASK +#define PLL_BYPASS(x) \ + ((x) << PRCI_DDRPLLCFG0_BYPASS_SHIFT) & PRCI_DDRPLLCFG0_BYPASS_MASK +#define PLL_FSE(x) \ + ((x) << PRCI_DDRPLLCFG0_FSE_SHIFT) & PRCI_DDRPLLCFG0_FSE_MASK +#define PLL_LOCK(x) \ + ((x) << PRCI_DDRPLLCFG0_LOCK_SHIFT) & PRCI_DDRPLLCFG0_LOCK_MASK + /* * Private structures */ @@ -672,6 +697,75 @@ static int sifive_fu540_prci_probe(struct udevice *dev) __prci_wrpll_read_cfg(pd, pc->pwd); } +#ifdef CONFIG_SPL_BUILD + u32 v; + struct clk clock; + + v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET); + v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK; + + clock.id = PRCI_CLK_COREPLL; + + if (v) { + /* corepll 500 Mhz */ + sifive_fu540_prci_set_rate(&clock, 500UL * MHz); + } else { + /* corepll 1 Ghz */ + sifive_fu540_prci_set_rate(&clock, 1000UL * MHz); + } + + sifive_fu540_prci_clock_enable(&__prci_init_clocks[clock.id], 1); + + //DDR init + u32 ddrctlmhz = + (PLL_R(0)) | + (PLL_F(DDRCTLPLL_F)) | + (PLL_Q(DDRCTLPLL_Q)) | + (PLL_RANGE(0x4)) | + (PLL_BYPASS(0)) | + (PLL_FSE(1)); + __prci_writel(ddrctlmhz, PRCI_DDRPLLCFG0_OFFSET, pd); + + clock.id = PRCI_CLK_DDRPLL; + sifive_fu540_prci_clock_enable(&__prci_init_clocks[clock.id], 1); + + /* Release DDR reset */ + v = __prci_readl(pd, PRCI_DEVICESRESETREG_OFFSET); + v |= PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK; + __prci_writel(v, PRCI_DEVICESRESETREG_OFFSET, pd); + + // HACK to get the '1 full controller clock cycle'. + asm volatile ("fence"); + v = __prci_readl(pd, PRCI_DEVICESRESETREG_OFFSET); + v |= (PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK | + PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK | + PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK); + __prci_writel(v, PRCI_DEVICESRESETREG_OFFSET, pd); + // HACK to get the '1 full controller clock cycle'. + asm volatile ("fence"); + + /* These take like 16 cycles to actually propagate. We can't go sending + * stuff before they come out of reset. So wait. (TODO: Add a register + * to read the current reset states, or DDR Control device?) + */ + for (int i = 0; i < 256; i++) + asm volatile ("nop"); + + /* GEMGXL init */ + clock.id = PRCI_CLK_GEMGXLPLL; + sifive_fu540_prci_set_rate(&clock, 125UL * MHz); + sifive_fu540_prci_clock_enable(&__prci_init_clocks[clock.id], 1); + + /* Release GEMGXL reset */ + v = __prci_readl(pd, PRCI_DEVICESRESETREG_OFFSET); + v |= PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK; + __prci_writel(v, PRCI_DEVICESRESETREG_OFFSET, pd); + + /* Procmon => core clock */ + __prci_writel(PRCI_PROCMONCFG_CORE_CLOCK_MASK, PRCI_PROCMONCFG_OFFSET, + pd); +#endif + return 0; }