@@ -8,6 +8,7 @@
#include <cpu_func.h>
#include <dm.h>
#include <errno.h>
+#include <generic-phy.h>
#include <usb.h>
#include <malloc.h>
#include <memalign.h>
@@ -37,6 +38,7 @@ struct dwc2_priv {
#ifdef CONFIG_DM_REGULATOR
struct udevice *vbus_supply;
#endif
+ struct phy phy;
#else
uint8_t *aligned_buffer;
uint8_t *status_buffer;
@@ -1322,13 +1324,71 @@ static int dwc2_usb_ofdata_to_platdata(struct udevice *dev)
return 0;
}
+static int dwc2_setup_phy(struct udevice *dev)
+{
+ struct dwc2_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = generic_phy_get_by_index(dev, 0, &priv->phy);
+ if (ret) {
+ if (ret == -ENOENT)
+ return 0; /* no PHY, nothing to do */
+ dev_err(dev, "Failed to get USB PHY: %d.\n", ret);
+ return ret;
+ }
+
+ ret = generic_phy_init(&priv->phy);
+ if (ret) {
+ dev_dbg(dev, "Failed to init USB PHY: %d.\n", ret);
+ return ret;
+ }
+
+ ret = generic_phy_power_on(&priv->phy);
+ if (ret) {
+ dev_dbg(dev, "Failed to power on USB PHY: %d.\n", ret);
+ generic_phy_exit(&priv->phy);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int dwc2_shutdown_phy(struct udevice *dev)
+{
+ struct dwc2_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ /* PHY is not valid when generic_phy_get_by_index() = -ENOENT */
+ if (!generic_phy_valid(&priv->phy))
+ return 0; /* no PHY, nothing to do */
+
+ ret = generic_phy_power_off(&priv->phy);
+ if (ret) {
+ dev_dbg(dev, "Failed to power off USB PHY: %d.\n", ret);
+ return ret;
+ }
+
+ ret = generic_phy_exit(&priv->phy);
+ if (ret) {
+ dev_dbg(dev, "Failed to power off USB PHY: %d.\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static int dwc2_usb_probe(struct udevice *dev)
{
struct dwc2_priv *priv = dev_get_priv(dev);
struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev);
+ int ret;
bus_priv->desc_before_addr = true;
+ ret = dwc2_setup_phy(dev);
+ if (ret)
+ return ret;
+
return dwc2_init_common(dev, priv);
}
@@ -1341,6 +1401,12 @@ static int dwc2_usb_remove(struct udevice *dev)
if (ret)
return ret;
+ ret = dwc2_shutdown_phy(dev);
+ if (ret) {
+ dev_dbg(dev, "Failed to shutdown USB PHY: %d.\n", ret);
+ return ret;
+ }
+
dwc2_uninit_common(priv->regs);
reset_release_bulk(&priv->resets);