From patchwork Fri Mar 6 16:54:41 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Patrick Delaunay X-Patchwork-Id: 243368 List-Id: U-Boot discussion From: patrick.delaunay at st.com (Patrick Delaunay) Date: Fri, 6 Mar 2020 17:54:41 +0100 Subject: [PATCH v2] ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1 Message-ID: <20200306165441.10760-1-patrick.delaunay@st.com> This commit manages diversity for STM32M15x SOCs with: - dedicated files to support all STM32MP15 SOCs family. The differences between those SOCs are: -STM32MP151 [1]: common file. -STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU. -STM32MP157 [3]: STM32MP153 + DSI + GPU. - new files to manage security diversity on STM32MP15x SOCs. On STM32MP15xY, "Y" gives information: -Y = A means no cryp IP and no secure boot. -Y = C means cryp IP + secure boot. - stm32mp157 pinctrl files to better manage package diversity. Signed-off-by: Patrick Delaunay Acked-by: Patrice Chotard --- Changes in v2: - rename "stm32mp157-u-boot.dtsi" to "stm32mp15-u-boot.dtsi" as this file is common for STM32M15x SOCs arch/arm/dts/stm32mp15-pinctrl.dtsi | 1114 +++++++++++++++++ ...p157-u-boot.dtsi => stm32mp15-u-boot.dtsi} | 0 .../dts/{stm32mp157c.dtsi => stm32mp151.dtsi} | 274 ++-- arch/arm/dts/stm32mp153.dtsi | 45 + arch/arm/dts/stm32mp157-pinctrl.dtsi | 1057 ---------------- arch/arm/dts/stm32mp157.dtsi | 31 + .../arm/dts/stm32mp157a-avenger96-u-boot.dtsi | 11 +- arch/arm/dts/stm32mp157a-avenger96.dts | 5 +- arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 7 +- arch/arm/dts/stm32mp157a-dk1.dts | 541 +------- arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi | 6 - arch/arm/dts/stm32mp157c-dk2.dts | 15 +- arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 7 +- arch/arm/dts/stm32mp157c-ed1.dts | 22 +- arch/arm/dts/stm32mp157c-ev1.dts | 30 +- arch/arm/dts/stm32mp157xaa-pinctrl.dtsi | 90 -- arch/arm/dts/stm32mp157xab-pinctrl.dtsi | 62 - arch/arm/dts/stm32mp157xac-pinctrl.dtsi | 78 -- arch/arm/dts/stm32mp157xad-pinctrl.dtsi | 62 - arch/arm/dts/stm32mp15xc.dtsi | 18 + arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 7 +- arch/arm/dts/stm32mp15xx-dhcom.dtsi | 6 +- arch/arm/dts/stm32mp15xx-dkx.dtsi | 639 ++++++++++ arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi | 85 ++ arch/arm/dts/stm32mp15xxab-pinctrl.dtsi | 57 + arch/arm/dts/stm32mp15xxac-pinctrl.dtsi | 73 ++ arch/arm/dts/stm32mp15xxad-pinctrl.dtsi | 57 + 27 files changed, 2406 insertions(+), 1993 deletions(-) create mode 100644 arch/arm/dts/stm32mp15-pinctrl.dtsi rename arch/arm/dts/{stm32mp157-u-boot.dtsi => stm32mp15-u-boot.dtsi} (100%) rename arch/arm/dts/{stm32mp157c.dtsi => stm32mp151.dtsi} (89%) create mode 100644 arch/arm/dts/stm32mp153.dtsi delete mode 100644 arch/arm/dts/stm32mp157-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp157.dtsi delete mode 100644 arch/arm/dts/stm32mp157xaa-pinctrl.dtsi delete mode 100644 arch/arm/dts/stm32mp157xab-pinctrl.dtsi delete mode 100644 arch/arm/dts/stm32mp157xac-pinctrl.dtsi delete mode 100644 arch/arm/dts/stm32mp157xad-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp15xc.dtsi create mode 100644 arch/arm/dts/stm32mp15xx-dkx.dtsi create mode 100644 arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp15xxab-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp15xxac-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp15xxad-pinctrl.dtsi diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi new file mode 100644 index 0000000000..53df840f85 --- /dev/null +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi @@ -0,0 +1,1114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre for STMicroelectronics. + */ +#include + +&pinctrl { + adc1_in6_pins_a: adc1-in6 { + pins { + pinmux = ; + }; + }; + + adc12_ain_pins_a: adc12-ain-0 { + pins { + pinmux = , /* ADC1 in13 */ + , /* ADC1 in6 */ + , /* ADC2 in2 */ + ; /* ADC2 in6 */ + }; + }; + + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { + pins { + pinmux = , /* ADC12 in18 */ + ; /* ADC12 in19 */ + }; + }; + + cec_pins_a: cec-0 { + pins { + pinmux = ; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_a: cec-sleep-0 { + pins { + pinmux = ; /* HDMI_CEC */ + }; + }; + + cec_pins_b: cec-1 { + pins { + pinmux = ; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_b: cec-sleep-1 { + pins { + pinmux = ; /* HDMI_CEC */ + }; + }; + + dac_ch1_pins_a: dac-ch1 { + pins { + pinmux = ; + }; + }; + + dac_ch2_pins_a: dac-ch2 { + pins { + pinmux = ; + }; + }; + + dcmi_pins_a: dcmi-0 { + pins { + pinmux = ,/* DCMI_HSYNC */ + ,/* DCMI_VSYNC */ + ,/* DCMI_PIXCLK */ + ,/* DCMI_D0 */ + ,/* DCMI_D1 */ + ,/* DCMI_D2 */ + ,/* DCMI_D3 */ + ,/* DCMI_D4 */ + ,/* DCMI_D5 */ + ,/* DCMI_D6 */ + ,/* DCMI_D7 */ + ,/* DCMI_D8 */ + ,/* DCMI_D9 */ + ,/* DCMI_D10 */ + ;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = ,/* DCMI_HSYNC */ + ,/* DCMI_VSYNC */ + ,/* DCMI_PIXCLK */ + ,/* DCMI_D0 */ + ,/* DCMI_D1 */ + ,/* DCMI_D2 */ + ,/* DCMI_D3 */ + ,/* DCMI_D4 */ + ,/* DCMI_D5 */ + ,/* DCMI_D6 */ + ,/* DCMI_D7 */ + ,/* DCMI_D8 */ + ,/* DCMI_D9 */ + ,/* DCMI_D10 */ + ;/* DCMI_D11 */ + }; + }; + + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = ; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + , /* ETH_MDIO */ + , /* ETH_MDC */ + , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + }; + }; + + fmc_pins_a: fmc-0 { + pins1 { + pinmux = , /* FMC_NOE */ + , /* FMC_NWE */ + , /* FMC_A16_FMC_CLE */ + , /* FMC_A17_FMC_ALE */ + , /* FMC_D0 */ + , /* FMC_D1 */ + , /* FMC_D2 */ + , /* FMC_D3 */ + , /* FMC_D4 */ + , /* FMC_D5 */ + , /* FMC_D6 */ + , /* FMC_D7 */ + ; /* FMC_NE2_FMC_NCE */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = ; /* FMC_NWAIT */ + bias-pull-up; + }; + }; + + fmc_sleep_pins_a: fmc-sleep-0 { + pins { + pinmux = , /* FMC_NOE */ + , /* FMC_NWE */ + , /* FMC_A16_FMC_CLE */ + , /* FMC_A17_FMC_ALE */ + , /* FMC_D0 */ + , /* FMC_D1 */ + , /* FMC_D2 */ + , /* FMC_D3 */ + , /* FMC_D4 */ + , /* FMC_D5 */ + , /* FMC_D6 */ + , /* FMC_D7 */ + , /* FMC_NWAIT */ + ; /* FMC_NE2_FMC_NCE */ + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_a: i2c1-1 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + }; + }; + + i2c1_pins_b: i2c1-2 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + }; + }; + + i2c2_pins_a: i2c2-0 { + pins { + pinmux = , /* I2C2_SCL */ + ; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_a: i2c2-1 { + pins { + pinmux = , /* I2C2_SCL */ + ; /* I2C2_SDA */ + }; + }; + + i2c2_pins_b1: i2c2-2 { + pins { + pinmux = ; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = ; /* I2C2_SDA */ + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_pins_sleep_a: i2c5-1 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + + }; + }; + + i2s2_pins_a: i2s2-0 { + pins { + pinmux = , /* I2S2_SDO */ + , /* I2S2_WS */ + ; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = , /* I2S2_SDO */ + , /* I2S2_WS */ + ; /* I2S2_CK */ + }; + }; + + ltdc_pins_a: ltdc-a-0 { + pins { + pinmux = , /* LCD_CLK */ + , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_DE */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6 */ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + ; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_a: ltdc-a-1 { + pins { + pinmux = , /* LCD_CLK */ + , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_DE */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6 */ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + ; /* LCD_B7 */ + }; + }; + + ltdc_pins_b: ltdc-b-0 { + pins { + pinmux = , /* LCD_CLK */ + , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_DE */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6 */ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + ; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_b: ltdc-b-1 { + pins { + pinmux = , /* LCD_CLK */ + , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_DE */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6 */ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + ; /* LCD_B7 */ + }; + }; + + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = ; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_a: m_can1-sleep-0 { + pins { + pinmux = , /* CAN1_TX */ + ; /* CAN1_RX */ + }; + }; + + pwm1_pins_a: pwm1-0 { + pins { + pinmux = , /* TIM1_CH1 */ + , /* TIM1_CH2 */ + ; /* TIM1_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_a: pwm1-sleep-0 { + pins { + pinmux = , /* TIM1_CH1 */ + , /* TIM1_CH2 */ + ; /* TIM1_CH4 */ + }; + }; + + pwm2_pins_a: pwm2-0 { + pins { + pinmux = ; /* TIM2_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm2_sleep_pins_a: pwm2-sleep-0 { + pins { + pinmux = ; /* TIM2_CH4 */ + }; + }; + + pwm3_pins_a: pwm3-0 { + pins { + pinmux = ; /* TIM3_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_a: pwm3-sleep-0 { + pins { + pinmux = ; /* TIM3_CH2 */ + }; + }; + + pwm4_pins_a: pwm4-0 { + pins { + pinmux = , /* TIM4_CH3 */ + ; /* TIM4_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = , /* TIM4_CH3 */ + ; /* TIM4_CH4 */ + }; + }; + + pwm4_pins_b: pwm4-1 { + pins { + pinmux = ; /* TIM4_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_b: pwm4-sleep-1 { + pins { + pinmux = ; /* TIM4_CH2 */ + }; + }; + + pwm5_pins_a: pwm5-0 { + pins { + pinmux = ; /* TIM5_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = ; /* TIM5_CH2 */ + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = ; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_a: pwm8-sleep-0 { + pins { + pinmux = ; /* TIM8_CH4 */ + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = ; /* TIM12_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_sleep_pins_a: pwm12-sleep-0 { + pins { + pinmux = ; /* TIM12_CH1 */ + }; + }; + + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = ; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = ; /* QSPI_CLK */ + }; + }; + + qspi_bk1_pins_a: qspi-bk1-0 { + pins1 { + pinmux = , /* QSPI_BK1_IO0 */ + , /* QSPI_BK1_IO1 */ + , /* QSPI_BK1_IO2 */ + ; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = ; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = , /* QSPI_BK1_IO0 */ + , /* QSPI_BK1_IO1 */ + , /* QSPI_BK1_IO2 */ + , /* QSPI_BK1_IO3 */ + ; /* QSPI_BK1_NCS */ + }; + }; + + qspi_bk2_pins_a: qspi-bk2-0 { + pins1 { + pinmux = , /* QSPI_BK2_IO0 */ + , /* QSPI_BK2_IO1 */ + , /* QSPI_BK2_IO2 */ + ; /* QSPI_BK2_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = ; /* QSPI_BK2_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = , /* QSPI_BK2_IO0 */ + , /* QSPI_BK2_IO1 */ + , /* QSPI_BK2_IO2 */ + , /* QSPI_BK2_IO3 */ + ; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = , /* SAI2_SCK_A */ + , /* SAI2_SD_A */ + , /* SAI2_FS_A */ + ; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = , /* SAI2_SCK_A */ + , /* SAI2_SD_A */ + , /* SAI2_FS_A */ + ; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = , /* SAI2_SCK_B */ + , /* SAI2_FS_B */ + ; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = , /* SAI2_SD_B */ + , /* SAI2_SCK_B */ + , /* SAI2_FS_B */ + ; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = ; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = ; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = ; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = ; /* SAI4_SD_A */ + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + , /* SDMMC1_D3 */ + ; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + ; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = ; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + , /* SDMMC1_D3 */ + , /* SDMMC1_CK */ + ; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = , /* SDMMC1_D0DIR */ + , /* SDMMC1_D123DIR */ + ; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = ; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = , /* SDMMC1_D0DIR */ + , /* SDMMC1_D123DIR */ + , /* SDMMC1_CDIR */ + ; /* SDMMC1_CKIN */ + }; + }; + + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + ; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + , /* SDMMC2_CK */ + ; /* SDMMC2_CMD */ + }; + }; + + sdmmc2_b4_pins_b: sdmmc2-b4-1 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + ; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; + }; + + sdmmc3_b4_pins_a: sdmmc3-b4-0 { + pins1 { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + , /* SDMMC3_D3 */ + ; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 { + pins1 { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + ; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 { + pins { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + , /* SDMMC3_D3 */ + , /* SDMMC3_CK */ + ; /* SDMMC3_CMD */ + }; + }; + + spdifrx_pins_a: spdifrx-0 { + pins { + pinmux = ; /* SPDIF_IN1 */ + bias-disable; + }; + }; + + spdifrx_sleep_pins_a: spdifrx-1 { + pins { + pinmux = ; /* SPDIF_IN1 */ + }; + }; + + spi2_pins_a: spi2-0 { + pins1 { + pinmux = , /* SPI2_SCK */ + , /* SPI2_NSS */ + ; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = ; /* SPI2_MISO */ + bias-disable; + }; + }; + + stusb1600_pins_a: stusb1600-0 { + pins { + pinmux = ; + bias-pull-up; + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* UART4_RX */ + , /* UART4_CTS */ + ; /* UART4_RTS */ + bias-disable; + }; + }; +}; + +&pinctrl_z { + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = ; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = ; /* I2C2_SCL */ + }; + }; + + i2c4_pins_a: i2c4-0 { + pins { + pinmux = , /* I2C4_SCL */ + ; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c4_pins_sleep_a: i2c4-1 { + pins { + pinmux = , /* I2C4_SCL */ + ; /* I2C4_SDA */ + }; + }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = , /* SPI1_SCK */ + ; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = ; /* SPI1_MISO */ + bias-disable; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi similarity index 100% rename from arch/arm/dts/stm32mp157-u-boot.dtsi rename to arch/arm/dts/stm32mp15-u-boot.dtsi diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp151.dtsi similarity index 89% rename from arch/arm/dts/stm32mp157c.dtsi rename to arch/arm/dts/stm32mp151.dtsi index 22a9386248..f185639a46 100644 --- a/arch/arm/dts/stm32mp157c.dtsi +++ b/arch/arm/dts/stm32mp151.dtsi @@ -20,12 +20,6 @@ device_type = "cpu"; reg = <0>; }; - - cpu1: cpu at 1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; }; psci { @@ -155,6 +149,11 @@ reg = <1>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers3: timer at 40001000 { @@ -184,6 +183,11 @@ reg = <2>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers4: timer at 40002000 { @@ -211,6 +215,11 @@ reg = <3>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers5: timer at 40003000 { @@ -240,6 +249,11 @@ reg = <4>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers6: timer at 40004000 { @@ -596,6 +610,11 @@ reg = <0>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers8: timer at 44001000 { @@ -627,6 +646,11 @@ reg = <7>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; usart6: serial at 44003000 { @@ -930,33 +954,7 @@ }; }; - m_can1: can at 4400e000 { - compatible = "bosch,m_can"; - reg = <0x4400e000 0x400>, <0x44011000 0x1400>; - reg-names = "m_can", "message_ram"; - interrupts = , - ; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; - status = "disabled"; - }; - - m_can2: can at 4400f000 { - compatible = "bosch,m_can"; - reg = <0x4400f000 0x400>, <0x44011000 0x2800>; - reg-names = "m_can", "message_ram"; - interrupts = , - ; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; - status = "disabled"; - }; - - dma1: dma at 48000000 { + dma1: dma-controller at 48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; interrupts = , @@ -973,7 +971,7 @@ dma-requests = <8>; }; - dma2: dma at 48001000 { + dma2: dma-controller at 48001000 { compatible = "st,stm32-dma"; reg = <0x48001000 0x400>; interrupts = , @@ -1041,8 +1039,8 @@ compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x10153180>; reg = <0x48004000 0x400>; - reg-names = "sdmmc"; - interrupts = ; + interrupts = ; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC3_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC3_R>; @@ -1273,15 +1271,6 @@ status = "disabled"; }; - cryp1: cryp at 54001000 { - compatible = "st,stm32mp1-cryp"; - reg = <0x54001000 0x400>; - interrupts = ; - clocks = <&rcc CRYP1>; - resets = <&rcc CRYP1_R>; - status = "disabled"; - }; - hash1: hash at 54002000 { compatible = "st,stm32f756-hash"; reg = <0x54002000 0x400>; @@ -1302,7 +1291,7 @@ status = "disabled"; }; - mdma1: dma at 58000000 { + mdma1: dma-controller at 58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; interrupts = ; @@ -1349,20 +1338,22 @@ arm,primecell-periphid = <0x10153180>; reg = <0x58005000 0x1000>; interrupts = ; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC1_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC1_R>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <120000000>; + status = "disabled"; }; sdmmc2: sdmmc at 58007000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x10153180>; reg = <0x58007000 0x1000>; - interrupts = ; + interrupts = ; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC2_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC2_R>; @@ -1406,6 +1397,7 @@ st,syscon = <&syscfg 0x4>; snps,mixed-burst; snps,pbl = <2>; + snps,en-tx-lpi-clockgating; snps,axi-config = <&stmmac_axi_config_0>; snps,tso; status = "disabled"; @@ -1430,26 +1422,6 @@ status = "disabled"; }; - gpu: gpu at 59000000 { - compatible = "vivante,gc"; - reg = <0x59000000 0x800>; - interrupts = ; - clocks = <&rcc GPU>, <&rcc GPU_K>; - clock-names = "bus" ,"core"; - resets = <&rcc GPU_R>; - status = "disabled"; - }; - - dsi: dsi at 5a000000 { - compatible = "st,stm32-dsi"; - reg = <0x5a000000 0x800>; - clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; - clock-names = "pclk", "ref", "px_clk"; - resets = <&rcc DSI_R>; - reset-names = "apb"; - status = "disabled"; - }; - ltdc: display-controller at 5a001000 { compatible = "st,stm32-ltdc"; reg = <0x5a001000 0x400>; @@ -1535,7 +1507,7 @@ status = "disabled"; }; - bsec: nvmem at 5c005000 { + bsec: efuse at 5c005000 { compatible = "st,stm32mp15-bsec"; reg = <0x5c005000 0x400>; #address-cells = <1>; @@ -1560,12 +1532,172 @@ #size-cells = <0>; status = "disabled"; }; + + /* + * Break node order to solve dependency probe issue between + * pinctrl and exti. + */ + pinctrl: pin-controller at 50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-pinctrl"; + ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + hwlocks = <&hwspinlock 0>; + pins-are-numbered; + + gpioa: gpio at 50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio at 50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOB>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio at 50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOC>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio at 50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&rcc GPIOD>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio at 50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&rcc GPIOE>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio at 50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&rcc GPIOF>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio at 50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&rcc GPIOG>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio at 50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&rcc GPIOH>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio at 5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&rcc GPIOI>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio at 5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&rcc GPIOJ>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio at 5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&rcc GPIOK>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + }; + + pinctrl_z: pin-controller-z at 54004000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-z-pinctrl"; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + hwlocks = <&hwspinlock 0>; + + gpioz: gpio at 54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&rcc GPIOZ>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + }; }; - mlahb { - compatible = "simple-bus"; + mlahb: ahb { + compatible = "st,mlahb", "simple-bus"; #address-cells = <1>; #size-cells = <1>; + ranges; dma-ranges = <0x00000000 0x38000000 0x10000>, <0x10000000 0x10000000 0x60000>, <0x30000000 0x30000000 0x60000>; diff --git a/arch/arm/dts/stm32mp153.dtsi b/arch/arm/dts/stm32mp153.dtsi new file mode 100644 index 0000000000..2d759fc601 --- /dev/null +++ b/arch/arm/dts/stm32mp153.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +#include "stm32mp151.dtsi" + +/ { + cpus { + cpu1: cpu at 1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + soc { + m_can1: can at 4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can at 4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi deleted file mode 100644 index 81a363d93d..0000000000 --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi +++ /dev/null @@ -1,1057 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2017 - All Rights Reserved - * Author: Ludovic Barre for STMicroelectronics. - */ -#include - -/ { - soc { - pinctrl: pin-controller at 50002000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32mp157-pinctrl"; - ranges = <0 0x50002000 0xa400>; - interrupt-parent = <&exti>; - st,syscfg = <&exti 0x60 0xff>; - hwlocks = <&hwspinlock 0>; - pins-are-numbered; - - gpioa: gpio at 50002000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x0 0x400>; - clocks = <&rcc GPIOA>; - st,bank-name = "GPIOA"; - status = "disabled"; - }; - - gpiob: gpio at 50003000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x400>; - clocks = <&rcc GPIOB>; - st,bank-name = "GPIOB"; - status = "disabled"; - }; - - gpioc: gpio at 50004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x400>; - clocks = <&rcc GPIOC>; - st,bank-name = "GPIOC"; - status = "disabled"; - }; - - gpiod: gpio at 50005000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x400>; - clocks = <&rcc GPIOD>; - st,bank-name = "GPIOD"; - status = "disabled"; - }; - - gpioe: gpio at 50006000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x400>; - clocks = <&rcc GPIOE>; - st,bank-name = "GPIOE"; - status = "disabled"; - }; - - gpiof: gpio at 50007000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x400>; - clocks = <&rcc GPIOF>; - st,bank-name = "GPIOF"; - status = "disabled"; - }; - - gpiog: gpio at 50008000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x6000 0x400>; - clocks = <&rcc GPIOG>; - st,bank-name = "GPIOG"; - status = "disabled"; - }; - - gpioh: gpio at 50009000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x7000 0x400>; - clocks = <&rcc GPIOH>; - st,bank-name = "GPIOH"; - status = "disabled"; - }; - - gpioi: gpio at 5000a000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x8000 0x400>; - clocks = <&rcc GPIOI>; - st,bank-name = "GPIOI"; - status = "disabled"; - }; - - gpioj: gpio at 5000b000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x9000 0x400>; - clocks = <&rcc GPIOJ>; - st,bank-name = "GPIOJ"; - status = "disabled"; - }; - - gpiok: gpio at 5000c000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0xa000 0x400>; - clocks = <&rcc GPIOK>; - st,bank-name = "GPIOK"; - status = "disabled"; - }; - - adc12_ain_pins_a: adc12-ain-0 { - pins { - pinmux = , /* ADC1 in13 */ - , /* ADC1 in6 */ - , /* ADC2 in2 */ - ; /* ADC2 in6 */ - }; - }; - - adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { - pins { - pinmux = , /* ADC12 in18 */ - ; /* ADC12 in19 */ - }; - }; - - cec_pins_a: cec-0 { - pins { - pinmux = ; - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - cec_pins_sleep_a: cec-sleep-0 { - pins { - pinmux = ; /* HDMI_CEC */ - }; - }; - - cec_pins_b: cec-1 { - pins { - pinmux = ; - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - cec_pins_sleep_b: cec-sleep-1 { - pins { - pinmux = ; /* HDMI_CEC */ - }; - }; - - dac_ch1_pins_a: dac-ch1 { - pins { - pinmux = ; - }; - }; - - dac_ch2_pins_a: dac-ch2 { - pins { - pinmux = ; - }; - }; - - dcmi_pins_a: dcmi-0 { - pins { - pinmux = ,/* DCMI_HSYNC */ - ,/* DCMI_VSYNC */ - ,/* DCMI_PIXCLK */ - ,/* DCMI_D0 */ - ,/* DCMI_D1 */ - ,/* DCMI_D2 */ - ,/* DCMI_D3 */ - ,/* DCMI_D4 */ - ,/* DCMI_D5 */ - ,/* DCMI_D6 */ - ,/* DCMI_D7 */ - ,/* DCMI_D8 */ - ,/* DCMI_D9 */ - ,/* DCMI_D10 */ - ;/* DCMI_D11 */ - bias-disable; - }; - }; - - dcmi_sleep_pins_a: dcmi-sleep-0 { - pins { - pinmux = ,/* DCMI_HSYNC */ - ,/* DCMI_VSYNC */ - ,/* DCMI_PIXCLK */ - ,/* DCMI_D0 */ - ,/* DCMI_D1 */ - ,/* DCMI_D2 */ - ,/* DCMI_D3 */ - ,/* DCMI_D4 */ - ,/* DCMI_D5 */ - ,/* DCMI_D6 */ - ,/* DCMI_D7 */ - ,/* DCMI_D8 */ - ,/* DCMI_D9 */ - ,/* DCMI_D10 */ - ;/* DCMI_D11 */ - }; - }; - - ethernet0_rgmii_pins_a: rgmii-0 { - pins1 { - pinmux = , /* ETH_RGMII_CLK125 */ - , /* ETH_RGMII_GTX_CLK */ - , /* ETH_RGMII_TXD0 */ - , /* ETH_RGMII_TXD1 */ - , /* ETH_RGMII_TXD2 */ - , /* ETH_RGMII_TXD3 */ - , /* ETH_RGMII_TX_CTL */ - ; /* ETH_MDC */ - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - pins2 { - pinmux = ; /* ETH_MDIO */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins3 { - pinmux = , /* ETH_RGMII_RXD0 */ - , /* ETH_RGMII_RXD1 */ - , /* ETH_RGMII_RXD2 */ - , /* ETH_RGMII_RXD3 */ - , /* ETH_RGMII_RX_CLK */ - ; /* ETH_RGMII_RX_CTL */ - bias-disable; - }; - }; - - ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { - pins1 { - pinmux = , /* ETH_RGMII_CLK125 */ - , /* ETH_RGMII_GTX_CLK */ - , /* ETH_RGMII_TXD0 */ - , /* ETH_RGMII_TXD1 */ - , /* ETH_RGMII_TXD2 */ - , /* ETH_RGMII_TXD3 */ - , /* ETH_RGMII_TX_CTL */ - , /* ETH_MDIO */ - , /* ETH_MDC */ - , /* ETH_RGMII_RXD0 */ - , /* ETH_RGMII_RXD1 */ - , /* ETH_RGMII_RXD2 */ - , /* ETH_RGMII_RXD3 */ - , /* ETH_RGMII_RX_CLK */ - ; /* ETH_RGMII_RX_CTL */ - }; - }; - - fmc_pins_a: fmc-0 { - pins1 { - pinmux = , /* FMC_NOE */ - , /* FMC_NWE */ - , /* FMC_A16_FMC_CLE */ - , /* FMC_A17_FMC_ALE */ - , /* FMC_D0 */ - , /* FMC_D1 */ - , /* FMC_D2 */ - , /* FMC_D3 */ - , /* FMC_D4 */ - , /* FMC_D5 */ - , /* FMC_D6 */ - , /* FMC_D7 */ - ; /* FMC_NE2_FMC_NCE */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = ; /* FMC_NWAIT */ - bias-pull-up; - }; - }; - - fmc_sleep_pins_a: fmc-sleep-0 { - pins { - pinmux = , /* FMC_NOE */ - , /* FMC_NWE */ - , /* FMC_A16_FMC_CLE */ - , /* FMC_A17_FMC_ALE */ - , /* FMC_D0 */ - , /* FMC_D1 */ - , /* FMC_D2 */ - , /* FMC_D3 */ - , /* FMC_D4 */ - , /* FMC_D5 */ - , /* FMC_D6 */ - , /* FMC_D7 */ - , /* FMC_NWAIT */ - ; /* FMC_NE2_FMC_NCE */ - }; - }; - - i2c1_pins_a: i2c1-0 { - pins { - pinmux = , /* I2C1_SCL */ - ; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c1_pins_sleep_a: i2c1-1 { - pins { - pinmux = , /* I2C1_SCL */ - ; /* I2C1_SDA */ - }; - }; - - i2c1_pins_b: i2c1-2 { - pins { - pinmux = , /* I2C1_SCL */ - ; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c1_pins_sleep_b: i2c1-3 { - pins { - pinmux = , /* I2C1_SCL */ - ; /* I2C1_SDA */ - }; - }; - - i2c2_pins_a: i2c2-0 { - pins { - pinmux = , /* I2C2_SCL */ - ; /* I2C2_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_a: i2c2-1 { - pins { - pinmux = , /* I2C2_SCL */ - ; /* I2C2_SDA */ - }; - }; - - i2c2_pins_b1: i2c2-2 { - pins { - pinmux = ; /* I2C2_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_b1: i2c2-3 { - pins { - pinmux = ; /* I2C2_SDA */ - }; - }; - - i2c5_pins_a: i2c5-0 { - pins { - pinmux = , /* I2C5_SCL */ - ; /* I2C5_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c5_pins_sleep_a: i2c5-1 { - pins { - pinmux = , /* I2C5_SCL */ - ; /* I2C5_SDA */ - - }; - }; - - i2s2_pins_a: i2s2-0 { - pins { - pinmux = , /* I2S2_SDO */ - , /* I2S2_WS */ - ; /* I2S2_CK */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - }; - - i2s2_pins_sleep_a: i2s2-1 { - pins { - pinmux = , /* I2S2_SDO */ - , /* I2S2_WS */ - ; /* I2S2_CK */ - }; - }; - - ltdc_pins_a: ltdc-a-0 { - pins { - pinmux = , /* LCD_CLK */ - , /* LCD_HSYNC */ - , /* LCD_VSYNC */ - , /* LCD_DE */ - , /* LCD_R0 */ - , /* LCD_R1 */ - , /* LCD_R2 */ - , /* LCD_R3 */ - , /* LCD_R4 */ - , /* LCD_R5 */ - , /* LCD_R6 */ - , /* LCD_R7 */ - , /* LCD_G0 */ - , /* LCD_G1 */ - , /* LCD_G2 */ - , /* LCD_G3 */ - , /* LCD_G4 */ - , /* LCD_G5 */ - , /* LCD_G6 */ - , /* LCD_G7 */ - , /* LCD_B0 */ - , /* LCD_B1 */ - , /* LCD_B2 */ - , /* LCD_B3 */ - , /* LCD_B4 */ - , /* LCD_B5 */ - , /* LCD_B6 */ - ; /* LCD_B7 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - }; - - ltdc_pins_sleep_a: ltdc-a-1 { - pins { - pinmux = , /* LCD_CLK */ - , /* LCD_HSYNC */ - , /* LCD_VSYNC */ - , /* LCD_DE */ - , /* LCD_R0 */ - , /* LCD_R1 */ - , /* LCD_R2 */ - , /* LCD_R3 */ - , /* LCD_R4 */ - , /* LCD_R5 */ - , /* LCD_R6 */ - , /* LCD_R7 */ - , /* LCD_G0 */ - , /* LCD_G1 */ - , /* LCD_G2 */ - , /* LCD_G3 */ - , /* LCD_G4 */ - , /* LCD_G5 */ - , /* LCD_G6 */ - , /* LCD_G7 */ - , /* LCD_B0 */ - , /* LCD_B1 */ - , /* LCD_B2 */ - , /* LCD_B3 */ - , /* LCD_B4 */ - , /* LCD_B5 */ - , /* LCD_B6 */ - ; /* LCD_B7 */ - }; - }; - - ltdc_pins_b: ltdc-b-0 { - pins { - pinmux = , /* LCD_CLK */ - , /* LCD_HSYNC */ - , /* LCD_VSYNC */ - , /* LCD_DE */ - , /* LCD_R0 */ - , /* LCD_R1 */ - , /* LCD_R2 */ - , /* LCD_R3 */ - , /* LCD_R4 */ - , /* LCD_R5 */ - , /* LCD_R6 */ - , /* LCD_R7 */ - , /* LCD_G0 */ - , /* LCD_G1 */ - , /* LCD_G2 */ - , /* LCD_G3 */ - , /* LCD_G4 */ - , /* LCD_G5 */ - , /* LCD_G6 */ - , /* LCD_G7 */ - , /* LCD_B0 */ - , /* LCD_B1 */ - , /* LCD_B2 */ - , /* LCD_B3 */ - , /* LCD_B4 */ - , /* LCD_B5 */ - , /* LCD_B6 */ - ; /* LCD_B7 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - }; - - ltdc_pins_sleep_b: ltdc-b-1 { - pins { - pinmux = , /* LCD_CLK */ - , /* LCD_HSYNC */ - , /* LCD_VSYNC */ - , /* LCD_DE */ - , /* LCD_R0 */ - , /* LCD_R1 */ - , /* LCD_R2 */ - , /* LCD_R3 */ - , /* LCD_R4 */ - , /* LCD_R5 */ - , /* LCD_R6 */ - , /* LCD_R7 */ - , /* LCD_G0 */ - , /* LCD_G1 */ - , /* LCD_G2 */ - , /* LCD_G3 */ - , /* LCD_G4 */ - , /* LCD_G5 */ - , /* LCD_G6 */ - , /* LCD_G7 */ - , /* LCD_B0 */ - , /* LCD_B1 */ - , /* LCD_B2 */ - , /* LCD_B3 */ - , /* LCD_B4 */ - , /* LCD_B5 */ - , /* LCD_B6 */ - ; /* LCD_B7 */ - }; - }; - - m_can1_pins_a: m-can1-0 { - pins1 { - pinmux = ; /* CAN1_TX */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = ; /* CAN1_RX */ - bias-disable; - }; - }; - - m_can1_sleep_pins_a: m_can1-sleep-0 { - pins { - pinmux = , /* CAN1_TX */ - ; /* CAN1_RX */ - }; - }; - - pwm2_pins_a: pwm2-0 { - pins { - pinmux = ; /* TIM2_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm8_pins_a: pwm8-0 { - pins { - pinmux = ; /* TIM8_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm12_pins_a: pwm12-0 { - pins { - pinmux = ; /* TIM12_CH1 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - qspi_clk_pins_a: qspi-clk-0 { - pins { - pinmux = ; /* QSPI_CLK */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - }; - - qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { - pins { - pinmux = ; /* QSPI_CLK */ - }; - }; - - qspi_bk1_pins_a: qspi-bk1-0 { - pins1 { - pinmux = , /* QSPI_BK1_IO0 */ - , /* QSPI_BK1_IO1 */ - , /* QSPI_BK1_IO2 */ - ; /* QSPI_BK1_IO3 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = ; /* QSPI_BK1_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; - }; - - qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { - pins { - pinmux = , /* QSPI_BK1_IO0 */ - , /* QSPI_BK1_IO1 */ - , /* QSPI_BK1_IO2 */ - , /* QSPI_BK1_IO3 */ - ; /* QSPI_BK1_NCS */ - }; - }; - - qspi_bk2_pins_a: qspi-bk2-0 { - pins1 { - pinmux = , /* QSPI_BK2_IO0 */ - , /* QSPI_BK2_IO1 */ - , /* QSPI_BK2_IO2 */ - ; /* QSPI_BK2_IO3 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = ; /* QSPI_BK2_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; - }; - - qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { - pins { - pinmux = , /* QSPI_BK2_IO0 */ - , /* QSPI_BK2_IO1 */ - , /* QSPI_BK2_IO2 */ - , /* QSPI_BK2_IO3 */ - ; /* QSPI_BK2_NCS */ - }; - }; - - sai2a_pins_a: sai2a-0 { - pins { - pinmux = , /* SAI2_SCK_A */ - , /* SAI2_SD_A */ - , /* SAI2_FS_A */ - ; /* SAI2_MCLK_A */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - }; - - sai2a_sleep_pins_a: sai2a-1 { - pins { - pinmux = , /* SAI2_SCK_A */ - , /* SAI2_SD_A */ - , /* SAI2_FS_A */ - ; /* SAI2_MCLK_A */ - }; - }; - - sai2b_pins_a: sai2b-0 { - pins1 { - pinmux = , /* SAI2_SCK_B */ - , /* SAI2_FS_B */ - ; /* SAI2_MCLK_B */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = ; /* SAI2_SD_B */ - bias-disable; - }; - }; - - sai2b_sleep_pins_a: sai2b-1 { - pins { - pinmux = , /* SAI2_SD_B */ - , /* SAI2_SCK_B */ - , /* SAI2_FS_B */ - ; /* SAI2_MCLK_B */ - }; - }; - - sai2b_pins_b: sai2b-2 { - pins { - pinmux = ; /* SAI2_SD_B */ - bias-disable; - }; - }; - - sai2b_sleep_pins_b: sai2b-3 { - pins { - pinmux = ; /* SAI2_SD_B */ - }; - }; - - sai4a_pins_a: sai4a-0 { - pins { - pinmux = ; /* SAI4_SD_A */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - }; - - sai4a_sleep_pins_a: sai4a-1 { - pins { - pinmux = ; /* SAI4_SD_A */ - }; - }; - - sdmmc1_b4_pins_a: sdmmc1-b4-0 { - pins { - pinmux = , /* SDMMC1_D0 */ - , /* SDMMC1_D1 */ - , /* SDMMC1_D2 */ - , /* SDMMC1_D3 */ - , /* SDMMC1_CK */ - ; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - }; - - sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { - pins1 { - pinmux = , /* SDMMC1_D0 */ - , /* SDMMC1_D1 */ - , /* SDMMC1_D2 */ - , /* SDMMC1_D3 */ - ; /* SDMMC1_CK */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - pins2{ - pinmux = ; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-open-drain; - bias-disable; - }; - }; - - sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { - pins { - pinmux = , /* SDMMC1_D0 */ - , /* SDMMC1_D1 */ - , /* SDMMC1_D2 */ - , /* SDMMC1_D3 */ - , /* SDMMC1_CK */ - ; /* SDMMC1_CMD */ - }; - }; - - sdmmc1_dir_pins_a: sdmmc1-dir-0 { - pins1 { - pinmux = , /* SDMMC1_D0DIR */ - , /* SDMMC1_D123DIR */ - ; /* SDMMC1_CDIR */ - slew-rate = <3>; - drive-push-pull; - bias-pull-up; - }; - pins2{ - pinmux = ; /* SDMMC1_CKIN */ - bias-pull-up; - }; - }; - - sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { - pins { - pinmux = , /* SDMMC1_D0DIR */ - , /* SDMMC1_D123DIR */ - , /* SDMMC1_CDIR */ - ; /* SDMMC1_CKIN */ - }; - }; - - sdmmc2_b4_pins_a: sdmmc2-b4-0 { - pins1 { - pinmux = , /* SDMMC2_D0 */ - , /* SDMMC2_D1 */ - , /* SDMMC2_D2 */ - , /* SDMMC2_D3 */ - ; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2 { - pinmux = ; /* SDMMC2_CK */ - slew-rate = <2>; - drive-push-pull; - bias-pull-up; - }; - }; - - sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { - pins1 { - pinmux = , /* SDMMC2_D0 */ - , /* SDMMC2_D1 */ - , /* SDMMC2_D2 */ - ; /* SDMMC2_D3 */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2 { - pinmux = ; /* SDMMC2_CK */ - slew-rate = <2>; - drive-push-pull; - bias-pull-up; - }; - pins3 { - pinmux = ; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-open-drain; - bias-pull-up; - }; - }; - - sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { - pins { - pinmux = , /* SDMMC2_D0 */ - , /* SDMMC2_D1 */ - , /* SDMMC2_D2 */ - , /* SDMMC2_D3 */ - , /* SDMMC2_CK */ - ; /* SDMMC2_CMD */ - }; - }; - - sdmmc2_d47_pins_a: sdmmc2-d47-0 { - pins { - pinmux = , /* SDMMC2_D4 */ - , /* SDMMC2_D5 */ - , /* SDMMC2_D6 */ - ; /* SDMMC2_D7 */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - }; - - sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { - pins { - pinmux = , /* SDMMC2_D4 */ - , /* SDMMC2_D5 */ - , /* SDMMC2_D6 */ - ; /* SDMMC2_D7 */ - }; - }; - - spdifrx_pins_a: spdifrx-0 { - pins { - pinmux = ; /* SPDIF_IN1 */ - bias-disable; - }; - }; - - spdifrx_sleep_pins_a: spdifrx-1 { - pins { - pinmux = ; /* SPDIF_IN1 */ - }; - }; - - spi2_pins_a: spi2-0 { - pins1 { - pinmux = , /* SPI2_SCK */ - , /* SPI2_NSS */ - ; /* SPI2_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - pins2 { - pinmux = ; /* SPI2_MISO */ - bias-disable; - }; - }; - - stusb1600_pins_a: stusb1600-0 { - pins { - pinmux = ; - bias-pull-up; - }; - }; - - uart4_pins_a: uart4-0 { - pins1 { - pinmux = ; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = ; /* UART4_RX */ - bias-disable; - }; - }; - - uart4_pins_b: uart4-1 { - pins1 { - pinmux = ; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = ; /* UART4_RX */ - bias-disable; - }; - }; - - uart7_pins_a: uart7-0 { - pins1 { - pinmux = ; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = , /* UART4_RX */ - , /* UART4_CTS */ - ; /* UART4_RTS */ - bias-disable; - }; - }; - }; - - pinctrl_z: pin-controller-z at 54004000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32mp157-z-pinctrl"; - ranges = <0 0x54004000 0x400>; - pins-are-numbered; - interrupt-parent = <&exti>; - st,syscfg = <&exti 0x60 0xff>; - hwlocks = <&hwspinlock 0>; - - gpioz: gpio at 54004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x400>; - clocks = <&rcc GPIOZ>; - st,bank-name = "GPIOZ"; - st,bank-ioport = <11>; - status = "disabled"; - }; - - i2c2_pins_b2: i2c2-0 { - pins { - pinmux = ; /* I2C2_SCL */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_b2: i2c2-1 { - pins { - pinmux = ; /* I2C2_SCL */ - }; - }; - - i2c4_pins_a: i2c4-0 { - pins { - pinmux = , /* I2C4_SCL */ - ; /* I2C4_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c4_pins_sleep_a: i2c4-1 { - pins { - pinmux = , /* I2C4_SCL */ - ; /* I2C4_SDA */ - }; - }; - - spi1_pins_a: spi1-0 { - pins1 { - pinmux = , /* SPI1_SCK */ - ; /* SPI1_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - - pins2 { - pinmux = ; /* SPI1_MISO */ - bias-disable; - }; - }; - }; - }; -}; diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/dts/stm32mp157.dtsi new file mode 100644 index 0000000000..3f0a4a91cc --- /dev/null +++ b/arch/arm/dts/stm32mp157.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +#include "stm32mp153.dtsi" + +/ { + soc { + gpu: gpu at 59000000 { + compatible = "vivante,gc"; + reg = <0x59000000 0x800>; + interrupts = ; + clocks = <&rcc GPU>, <&rcc GPU_K>; + clock-names = "bus" ,"core"; + resets = <&rcc GPU_R>; + status = "disabled"; + }; + + dsi: dsi at 5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi index d6dc746365..228635b6c6 100644 --- a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi @@ -7,7 +7,7 @@ */ #include -#include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-u-boot.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" / { @@ -145,7 +145,10 @@ &sdmmc1_b4_pins_a { u-boot,dm-spl; - pins { + pins1 { + u-boot,dm-spl; + }; + pins2 { u-boot,dm-spl; }; }; @@ -196,7 +199,3 @@ u-boot,force-b-session-valid; hnp-srp-disable; }; - -&v3v3 { - regulator-always-on; -}; diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts index 3065593bf2..5bc377d5e3 100644 --- a/arch/arm/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/dts/stm32mp157a-avenger96.dts @@ -6,8 +6,9 @@ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" #include #include diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index a5cc01dd19..5844d41c53 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -4,7 +4,7 @@ */ #include -#include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-u-boot.dtsi" #include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" / { @@ -164,7 +164,10 @@ &sdmmc1_b4_pins_a { u-boot,dm-spl; - pins { + pins1 { + u-boot,dm-spl; + }; + pins2 { u-boot,dm-spl; }; }; diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts index 624bf6954b..d03d4cd260 100644 --- a/arch/arm/dts/stm32mp157a-dk1.dts +++ b/arch/arm/dts/stm32mp157a-dk1.dts @@ -6,10 +6,10 @@ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" -#include -#include +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; @@ -23,537 +23,4 @@ chosen { stdout-path = "serial0:115200n8"; }; - - memory at c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mcuram2: mcuram2 at 10000000 { - compatible = "shared-dma-pool"; - reg = <0x10000000 0x40000>; - no-map; - }; - - vdev0vring0: vdev0vring0 at 10040000 { - compatible = "shared-dma-pool"; - reg = <0x10040000 0x1000>; - no-map; - }; - - vdev0vring1: vdev0vring1 at 10041000 { - compatible = "shared-dma-pool"; - reg = <0x10041000 0x1000>; - no-map; - }; - - vdev0buffer: vdev0buffer at 10042000 { - compatible = "shared-dma-pool"; - reg = <0x10042000 0x4000>; - no-map; - }; - - mcuram: mcuram at 30000000 { - compatible = "shared-dma-pool"; - reg = <0x30000000 0x40000>; - no-map; - }; - - retram: retram at 38000000 { - compatible = "shared-dma-pool"; - reg = <0x38000000 0x10000>; - no-map; - }; - - gpu_reserved: gpu at d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; - }; - - led { - compatible = "gpio-leds"; - blue { - label = "heartbeat"; - gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - sound { - compatible = "audio-graph-card"; - label = "STM32MP1-DK"; - routing = - "Playback" , "MCLK", - "Capture" , "MCLK", - "MICL" , "Mic Bias"; - dais = <&sai2a_port &sai2b_port &i2s2_port>; - status = "okay"; - }; -}; - -&adc { - pinctrl-names = "default"; - pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; - vdd-supply = <&vdd>; - vdda-supply = <&vdd>; - vref-supply = <&vrefbuf>; - status = "disabled"; - adc1: adc at 0 { - /* - * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. - * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: - * 5 * (56 + 47kOhms) * 5pF => 2.5us. - * Use arbitrary margin here (e.g. 5us). - */ - st,min-sample-time-nsecs = <5000>; - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 6 13 18 19>; - status = "okay"; - }; - adc2: adc at 100 { - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 2 6 18 19>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; - }; -}; - -&cec { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cec_pins_b>; - pinctrl-1 = <&cec_pins_sleep_b>; - status = "okay"; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rgmii-id"; - max-speed = <1000>; - phy-handle = <&phy0>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy at 0 { - reg = <0>; - }; - }; -}; - -&gpu { - contiguous-area = <&gpu_reserved>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_pins_sleep_a>; - i2c-scl-rising-time-ns = <100>; - i2c-scl-falling-time-ns = <7>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - - hdmi-transmitter at 39 { - compatible = "sil,sii9022"; - reg = <0x39>; - iovcc-supply = <&v3v3_hdmi>; - cvcc12-supply = <&v1v2_hdmi>; - reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpiog>; - #sound-dai-cells = <0>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port at 0 { - reg = <0>; - sii9022_in: endpoint { - remote-endpoint = <<dc_ep0_out>; - }; - }; - - port at 3 { - reg = <3>; - sii9022_tx_endpoint: endpoint { - remote-endpoint = <&i2s2_endpoint>; - }; - }; - }; - }; - - cs42l51: cs42l51 at 4a { - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - #sound-dai-cells = <0>; - VL-supply = <&v3v3>; - VD-supply = <&v1v8_audio>; - VA-supply = <&v1v8_audio>; - VAHP-supply = <&v1v8_audio>; - reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; - clocks = <&sai2a>; - clock-names = "MCLK"; - status = "okay"; - - cs42l51_port: port { - #address-cells = <1>; - #size-cells = <0>; - - cs42l51_tx_endpoint: endpoint at 0 { - reg = <0>; - remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; - }; - - cs42l51_rx_endpoint: endpoint at 1 { - reg = <1>; - remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; - }; - }; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - - typec: stusb1600 at 28 { - compatible = "st,stusb1600"; - reg = <0x28>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpioi>; - pinctrl-names = "default"; - pinctrl-0 = <&stusb1600_pins_a>; - - status = "okay"; - - typec_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "sink"; - power-opmode = "default"; - }; - }; - - pmic: stpmic at 33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - status = "okay"; - - regulators { - compatible = "st,stpmic1-regulators"; - ldo1-supply = <&v3v3>; - ldo3-supply = <&vdd_ddr>; - ldo6-supply = <&v3v3>; - pwr_sw1-supply = <&bst_out>; - pwr_sw2-supply = <&bst_out>; - - vddcore: buck1 { - regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd_ddr: buck2 { - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - st,mask-reset; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-over-current-protection; - regulator-initial-mode = <0>; - }; - - v1v8_audio: ldo1 { - regulator-name = "v1v8_audio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - interrupts = ; - }; - - v3v3_hdmi: ldo2 { - regulator-name = "v3v3_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - interrupts = ; - }; - - vtt_ddr: ldo3 { - regulator-name = "vtt_ddr"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - regulator-over-current-protection; - }; - - vdd_usb: ldo4 { - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - interrupts = ; - }; - - vdda: ldo5 { - regulator-name = "vdda"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - interrupts = ; - regulator-boot-on; - }; - - v1v2_hdmi: ldo6 { - regulator-name = "v1v2_hdmi"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - interrupts = ; - }; - - vref_ddr: vref_ddr { - regulator-name = "vref_ddr"; - regulator-always-on; - regulator-over-current-protection; - }; - - bst_out: boost { - regulator-name = "bst_out"; - interrupts = ; - }; - - vbus_otg: pwr_sw1 { - regulator-name = "vbus_otg"; - interrupts = ; - }; - - vbus_sw: pwr_sw2 { - regulator-name = "vbus_sw"; - interrupts = ; - regulator-active-discharge = <1>; - }; - }; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = , ; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; - status = "okay"; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - status = "disabled"; - }; - }; -}; - -&i2s2 { - clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "i2sclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2s2_pins_a>; - pinctrl-1 = <&i2s2_pins_sleep_a>; - status = "okay"; - - i2s2_port: port { - i2s2_endpoint: endpoint { - remote-endpoint = <&sii9022_tx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - }; - }; -}; - -&ipcc { - status = "okay"; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -<dc { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; - status = "okay"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - ltdc_ep0_out: endpoint at 0 { - reg = <0>; - remote-endpoint = <&sii9022_in>; - }; - }; -}; - -&m4_rproc { - memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, - <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; - interrupt-parent = <&exti>; - interrupts = <68 1>; - status = "okay"; -}; - -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&rng1 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&sai2 { - clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; - pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; - status = "okay"; - - sai2a: audio-controller at 4400b004 { - #clock-cells = <0>; - dma-names = "tx"; - clocks = <&rcc SAI2_K>; - clock-names = "sai_ck"; - status = "okay"; - - sai2a_port: port { - sai2a_endpoint: endpoint { - remote-endpoint = <&cs42l51_tx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - }; - }; - - sai2b: audio-controller at 4400b024 { - dma-names = "rx"; - st,sync = <&sai2a 2>; - clocks = <&rcc SAI2_K>, <&sai2a>; - clock-names = "sai_ck", "MCLK"; - status = "okay"; - - sai2b_port: port { - sai2b_endpoint: endpoint { - remote-endpoint = <&cs42l51_rx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - }; - }; -}; - -&sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc1_b4_pins_a>; - pinctrl-1 = <&sdmmc1_b4_od_pins_a>; - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&v3v3>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; - status = "okay"; -}; - -&usbotg_hs { - dr_mode = "peripheral"; - phys = <&usbphyc_port1 0>; - phy-names = "usb2-phy"; - status = "okay"; -}; - -&usbphyc { - status = "okay"; -}; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; - -&vrefbuf { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - vdda-supply = <&vdd>; - status = "okay"; }; diff --git a/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi b/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi index 18ac1e3cb2..06ef3a4095 100644 --- a/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi @@ -4,9 +4,3 @@ */ #include "stm32mp157a-dk1-u-boot.dtsi" - -&i2c1 { - hdmi-transmitter at 39 { - reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; - }; -}; diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts index d26adcbeba..7985b80967 100644 --- a/arch/arm/dts/stm32mp157c-dk2.dts +++ b/arch/arm/dts/stm32mp157c-dk2.dts @@ -6,11 +6,24 @@ /dts-v1/; -#include "stm32mp157a-dk1.dts" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &dsi { diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 347edf7e58..ed2f024be9 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -4,7 +4,7 @@ */ #include -#include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-u-boot.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" / { @@ -161,7 +161,10 @@ &sdmmc1_b4_pins_a { u-boot,dm-spl; - pins { + pins1 { + u-boot,dm-spl; + }; + pins2 { u-boot,dm-spl; }; }; diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index ae4da39ce8..54af7c97b3 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -5,8 +5,10 @@ */ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xaa-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" #include #include @@ -89,6 +91,22 @@ }; }; +&adc { + /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */ + pinctrl-0 = <&adc1_in6_pins_a>; + pinctrl-names = "default"; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "disabled"; + adc1: adc at 0 { + st,adc-channels = <0 1 6>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-nsecs = <400>; + status = "okay"; + }; +}; + &dac { pinctrl-names = "default"; pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index bd8ffc185f..228e35e168 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -182,8 +182,6 @@ ov5640: camera at 3c { compatible = "ovti,ov5640"; - pinctrl-names = "default"; - pinctrl-0 = <&ov5640_pins>; reg = <0x3c>; clocks = <&clk_ext_camera>; clock-names = "xclk"; @@ -224,12 +222,6 @@ pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; bias-pull-down; }; - - ov5640_pins: camera { - pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ - drive-push-pull; - output-low; - }; }; }; }; @@ -291,6 +283,18 @@ }; }; +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + &spi1 { pinctrl-names = "default"; pinctrl-0 = <&spi1_pins_a>; @@ -304,7 +308,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm2_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm2_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer at 1 { @@ -318,7 +323,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm8_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm8_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer at 7 { @@ -332,7 +338,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm12_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer at 11 { @@ -348,6 +355,7 @@ &usbotg_hs { dr_mode = "peripheral"; phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; status = "okay"; }; diff --git a/arch/arm/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/dts/stm32mp157xaa-pinctrl.dtsi deleted file mode 100644 index 875adf5e1e..0000000000 --- a/arch/arm/dts/stm32mp157xaa-pinctrl.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller at 50002000 { - st,package = ; - - gpioa: gpio at 50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio at 50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio at 50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio at 50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio at 50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio at 50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio at 50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio at 50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio at 5000a000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 128 16>; - }; - - gpioj: gpio at 5000b000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 144 16>; - }; - - gpiok: gpio at 5000c000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl 0 160 8>; - }; - }; - - pinctrl_z: pin-controller-z at 54004000 { - st,package = ; - - gpioz: gpio at 54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/dts/stm32mp157xab-pinctrl.dtsi deleted file mode 100644 index 961fa12a59..0000000000 --- a/arch/arm/dts/stm32mp157xab-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller at 50002000 { - st,package = ; - - gpioa: gpio at 50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio at 50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio at 50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio at 50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio at 50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio at 50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio at 50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio at 50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/dts/stm32mp157xac-pinctrl.dtsi deleted file mode 100644 index 26600f188d..0000000000 --- a/arch/arm/dts/stm32mp157xac-pinctrl.dtsi +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller at 50002000 { - st,package = ; - - gpioa: gpio at 50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio at 50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio at 50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio at 50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio at 50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio at 50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio at 50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio at 50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio at 5000a000 { - status = "okay"; - ngpios = <12>; - gpio-ranges = <&pinctrl 0 128 12>; - }; - }; - - pinctrl_z: pin-controller-z at 54004000 { - st,package = ; - - gpioz: gpio at 54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/dts/stm32mp157xad-pinctrl.dtsi deleted file mode 100644 index 910113f3e6..0000000000 --- a/arch/arm/dts/stm32mp157xad-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller at 50002000 { - st,package = ; - - gpioa: gpio at 50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio at 50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio at 50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio at 50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio at 50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio at 50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio at 50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio at 50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/dts/stm32mp15xc.dtsi b/arch/arm/dts/stm32mp15xc.dtsi new file mode 100644 index 0000000000..b06a55a2fa --- /dev/null +++ b/arch/arm/dts/stm32mp15xc.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/ { + soc { + cryp1: cryp at 54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = ; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 6c952a57ee..62c45def43 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -4,7 +4,7 @@ */ #include -#include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-u-boot.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" / { @@ -196,7 +196,10 @@ &sdmmc1_b4_pins_a { u-boot,dm-spl; - pins { + pins1 { + u-boot,dm-spl; + }; + pins2 { u-boot,dm-spl; }; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcom.dtsi b/arch/arm/dts/stm32mp15xx-dhcom.dtsi index bed69c97b6..31da41bfca 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom.dtsi @@ -4,8 +4,10 @@ */ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xaa-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" #include #include diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi new file mode 100644 index 0000000000..42d3f0cb2d --- /dev/null +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi @@ -0,0 +1,639 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +#include +#include + +/ { + memory at c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2 at 10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0 at 10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1 at 10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer at 10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram at 30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram at 38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu at d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-DK"; + routing = + "Playback" , "MCLK", + "Capture" , "MCLK", + "MICL" , "Mic Bias"; + dais = <&sai2a_port &sai2b_port &i2s2_port>; + status = "okay"; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd>; + vref-supply = <&vrefbuf>; + status = "disabled"; + adc1: adc at 0 { + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (56 + 47kOhms) * 5pF => 2.5us. + * Use arbitrary margin here (e.g. 5us). + */ + st,min-sample-time-nsecs = <5000>; + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 6 13 18 19>; + status = "okay"; + }; + adc2: adc at 100 { + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 2 6 18 19>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_pins_sleep_b>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy at 0 { + reg = <0>; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter at 39 { + compatible = "sil,sii9022"; + reg = <0x39>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + #sound-dai-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port at 3 { + reg = <3>; + sii9022_tx_endpoint: endpoint { + remote-endpoint = <&i2s2_endpoint>; + }; + }; + }; + }; + + cs42l51: cs42l51 at 4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + #sound-dai-cells = <0>; + VL-supply = <&v3v3>; + VD-supply = <&v1v8_audio>; + VA-supply = <&v1v8_audio>; + VAHP-supply = <&v1v8_audio>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + clocks = <&sai2a>; + clock-names = "MCLK"; + status = "okay"; + + cs42l51_port: port { + #address-cells = <1>; + #size-cells = <0>; + + cs42l51_tx_endpoint: endpoint at 0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + cs42l51_rx_endpoint: endpoint at 1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + typec: stusb1600 at 28 { + compatible = "st,stusb1600"; + reg = <0x28>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + pinctrl-names = "default"; + pinctrl-0 = <&stusb1600_pins_a>; + + status = "okay"; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "sink"; + power-opmode = "default"; + }; + }; + + pmic: stpmic at 33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = ; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = ; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = ; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = ; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = ; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = ; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = ; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = ; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = , ; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&i2s2 { + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s2_pins_a>; + pinctrl-1 = <&i2s2_pins_sleep_a>; + status = "okay"; + + i2s2_port: port { + i2s2_endpoint: endpoint { + remote-endpoint = <&sii9022_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint at 0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller at 4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&cs42l51_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; + + sai2b: audio-controller at 4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&cs42l51_rx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + +&timers1 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer at 0 { + status = "okay"; + }; +}; + +&timers3 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer at 2 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; + pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer at 3 { + status = "okay"; + }; +}; + +&timers5 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer at 4 { + status = "okay"; + }; +}; + +&timers6 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + timer at 5 { + status = "okay"; + }; +}; + +&timers12 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer at 11 { + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi b/arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi new file mode 100644 index 0000000000..04f7a43ad6 --- /dev/null +++ b/arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio at 50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio at 50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio at 50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio at 50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio at 50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio at 50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio at 50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio at 50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio at 5000a000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio at 5000b000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio at 5000c000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; +}; + +&pinctrl_z { + st,package = ; + + gpioz: gpio at 54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/dts/stm32mp15xxab-pinctrl.dtsi b/arch/arm/dts/stm32mp15xxab-pinctrl.dtsi new file mode 100644 index 0000000000..328dad140e --- /dev/null +++ b/arch/arm/dts/stm32mp15xxab-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio at 50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio at 50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio at 50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio at 50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio at 50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio at 50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio at 50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio at 50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; diff --git a/arch/arm/dts/stm32mp15xxac-pinctrl.dtsi b/arch/arm/dts/stm32mp15xxac-pinctrl.dtsi new file mode 100644 index 0000000000..7eaa245f44 --- /dev/null +++ b/arch/arm/dts/stm32mp15xxac-pinctrl.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio at 50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio at 50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio at 50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio at 50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio at 50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio at 50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio at 50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio at 50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio at 5000a000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + st,package = ; + + gpioz: gpio at 54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/dts/stm32mp15xxad-pinctrl.dtsi b/arch/arm/dts/stm32mp15xxad-pinctrl.dtsi new file mode 100644 index 0000000000..b63e207de2 --- /dev/null +++ b/arch/arm/dts/stm32mp15xxad-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio at 50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio at 50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio at 50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio at 50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio at 50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio at 50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio at 50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio at 50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +};