From patchwork Sat Feb 29 00:09:35 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Angelo Dureghello X-Patchwork-Id: 237024 List-Id: U-Boot discussion From: angelo.dureghello at timesys.com (Angelo Dureghello) Date: Sat, 29 Feb 2020 01:09:35 +0100 Subject: [PATCH] serial: mcfuart: renaming to a more appropriate name Message-ID: <20200229000935.625379-1-angelo.dureghello@timesys.com> From: Angelo Durgehello All drivers seems to align now to serial_xxx maning, so, aligning also this driver, to allow to be found easily. Signed-off-by: Angelo Durgehello --- drivers/serial/Makefile | 2 +- drivers/serial/mcfuart.c | 179 --------------------------------------- 2 files changed, 1 insertion(+), 180 deletions(-) delete mode 100644 drivers/serial/mcfuart.c diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index e26b64494e..e4a92bbbb7 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -39,7 +39,7 @@ obj-$(CONFIG_COREBOOT_SERIAL) += serial_coreboot.o obj-$(CONFIG_CORTINA_UART) += serial_cortina.o obj-$(CONFIG_EFI_APP) += serial_efi.o obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o -obj-$(CONFIG_MCFUART) += mcfuart.o +obj-$(CONFIG_MCFUART) += serial_mcf.o obj-$(CONFIG_SYS_NS16550) += ns16550.o obj-$(CONFIG_S5P) += serial_s5p.o obj-$(CONFIG_MXC_UART) += serial_mxc.o diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c deleted file mode 100644 index b599064b48..0000000000 --- a/drivers/serial/mcfuart.c +++ /dev/null @@ -1,179 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew, Tsi-Chung.Liew at freescale.com. - * - * Modified to add device model (DM) support - * (C) Copyright 2015 Angelo Dureghello - * - * Modified to add DM and fdt support, removed non DM code - * (C) Copyright 2018 Angelo Dureghello - */ - -/* - * Minimal serial functions needed to use one of the uart ports - * as serial console interface. - */ - -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -extern void uart_port_conf(int port); - -static int mcf_serial_init_common(uart_t *uart, int port_idx, int baudrate) -{ - u32 counter; - - uart_port_conf(port_idx); - - /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ - writeb(UART_UCR_RESET_RX, &uart->ucr); - writeb(UART_UCR_RESET_TX, &uart->ucr); - writeb(UART_UCR_RESET_ERROR, &uart->ucr); - writeb(UART_UCR_RESET_MR, &uart->ucr); - __asm__("nop"); - - writeb(0, &uart->uimr); - - /* write to CSR: RX/TX baud rate from timers */ - writeb(UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK, &uart->ucsr); - - writeb(UART_UMR_BC_8 | UART_UMR_PM_NONE, &uart->umr); - writeb(UART_UMR_SB_STOP_BITS_1, &uart->umr); - - /* Setting up BaudRate */ - counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2)); - counter = counter / baudrate; - - /* write to CTUR: divide counter upper byte */ - writeb((u8)((counter & 0xff00) >> 8), &uart->ubg1); - /* write to CTLR: divide counter lower byte */ - writeb((u8)(counter & 0x00ff), &uart->ubg2); - - writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr); - - return (0); -} - -static void mcf_serial_setbrg_common(uart_t *uart, int baudrate) -{ - u32 counter; - - /* Setting up BaudRate */ - counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2)); - counter = counter / baudrate; - - /* write to CTUR: divide counter upper byte */ - writeb(((counter & 0xff00) >> 8), &uart->ubg1); - /* write to CTLR: divide counter lower byte */ - writeb((counter & 0x00ff), &uart->ubg2); - - writeb(UART_UCR_RESET_RX, &uart->ucr); - writeb(UART_UCR_RESET_TX, &uart->ucr); - - writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr); -} - -static int coldfire_serial_probe(struct udevice *dev) -{ - struct coldfire_serial_platdata *plat = dev->platdata; - - plat->port = dev->seq; - - return mcf_serial_init_common((uart_t *)plat->base, - plat->port, plat->baudrate); -} - -static int coldfire_serial_putc(struct udevice *dev, const char ch) -{ - struct coldfire_serial_platdata *plat = dev->platdata; - uart_t *uart = (uart_t *)plat->base; - - /* Wait for last character to go. */ - if (!(readb(&uart->usr) & UART_USR_TXRDY)) - return -EAGAIN; - - writeb(ch, &uart->utb); - - return 0; -} - -static int coldfire_serial_getc(struct udevice *dev) -{ - struct coldfire_serial_platdata *plat = dev->platdata; - uart_t *uart = (uart_t *)(plat->base); - - /* Wait for a character to arrive. */ - if (!(readb(&uart->usr) & UART_USR_RXRDY)) - return -EAGAIN; - - return readb(&uart->urb); -} - -int coldfire_serial_setbrg(struct udevice *dev, int baudrate) -{ - struct coldfire_serial_platdata *plat = dev->platdata; - uart_t *uart = (uart_t *)(plat->base); - - mcf_serial_setbrg_common(uart, baudrate); - - return 0; -} - -static int coldfire_serial_pending(struct udevice *dev, bool input) -{ - struct coldfire_serial_platdata *plat = dev->platdata; - uart_t *uart = (uart_t *)(plat->base); - - if (input) - return readb(&uart->usr) & UART_USR_RXRDY ? 1 : 0; - else - return readb(&uart->usr) & UART_USR_TXRDY ? 0 : 1; - - return 0; -} - -static int coldfire_ofdata_to_platdata(struct udevice *dev) -{ - struct coldfire_serial_platdata *plat = dev_get_platdata(dev); - fdt_addr_t addr_base; - - addr_base = devfdt_get_addr(dev); - if (addr_base == FDT_ADDR_T_NONE) - return -ENODEV; - - plat->base = (uint32_t)addr_base; - plat->baudrate = gd->baudrate; - - return 0; -} - -static const struct dm_serial_ops coldfire_serial_ops = { - .putc = coldfire_serial_putc, - .pending = coldfire_serial_pending, - .getc = coldfire_serial_getc, - .setbrg = coldfire_serial_setbrg, -}; - -static const struct udevice_id coldfire_serial_ids[] = { - { .compatible = "fsl,mcf-uart" }, - { } -}; - -U_BOOT_DRIVER(serial_coldfire) = { - .name = "serial_coldfire", - .id = UCLASS_SERIAL, - .of_match = coldfire_serial_ids, - .ofdata_to_platdata = coldfire_ofdata_to_platdata, - .platdata_auto_alloc_size = sizeof(struct coldfire_serial_platdata), - .probe = coldfire_serial_probe, - .ops = &coldfire_serial_ops, - .flags = DM_FLAG_PRE_RELOC, -};