From patchwork Thu Feb 27 17:28:01 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heinrich Schuchardt X-Patchwork-Id: 236959 List-Id: U-Boot discussion From: xypron.glpk at gmx.de (Heinrich Schuchardt) Date: Thu, 27 Feb 2020 18:28:01 +0100 Subject: [PATCH 2/2] ide: remove duplicate defines form include/ata.h In-Reply-To: <20200227172801.3126-1-xypron.glpk@gmx.de> References: <20200227172801.3126-1-xypron.glpk@gmx.de> Message-ID: <20200227172801.3126-3-xypron.glpk@gmx.de> ATA commands are already defined in include/libata.h. There is no need to duplicate them in include/ata.h. Signed-off-by: Heinrich Schuchardt Reviewed-by: Simon Glass --- include/ata.h | 34 ---------------------------------- 1 file changed, 34 deletions(-) -- 2.25.0 diff --git a/include/ata.h b/include/ata.h index 3f4e4a0234..e35d91941d 100644 --- a/include/ata.h +++ b/include/ata.h @@ -70,43 +70,9 @@ #endif /* ATA_DEVICE */ #define ATA_LBA 0xE0 -/* - * ATA Commands (only mandatory commands listed here) - */ -#define ATA_CMD_READ 0x20 /* Read Sectors (with retries) */ -#define ATA_CMD_READN 0x21 /* Read Sectors ( no retries) */ -#define ATA_CMD_WRITE 0x30 /* Write Sectores (with retries)*/ -#define ATA_CMD_WRITEN 0x31 /* Write Sectors ( no retries)*/ -#define ATA_CMD_VRFY 0x40 /* Read Verify (with retries) */ -#define ATA_CMD_VRFYN 0x41 /* Read verify ( no retries) */ -#define ATA_CMD_SEEK 0x70 /* Seek */ -#define ATA_CMD_DIAG 0x90 /* Execute Device Diagnostic */ -#define ATA_CMD_INIT 0x91 /* Initialize Device Parameters */ -#define ATA_CMD_RD_MULT 0xC4 /* Read Multiple */ -#define ATA_CMD_WR_MULT 0xC5 /* Write Multiple */ -#define ATA_CMD_SETMULT 0xC6 /* Set Multiple Mode */ -#define ATA_CMD_RD_DMA 0xC8 /* Read DMA (with retries) */ -#define ATA_CMD_RD_DMAN 0xC9 /* Read DMS ( no retries) */ -#define ATA_CMD_WR_DMA 0xCA /* Write DMA (with retries) */ -#define ATA_CMD_WR_DMAN 0xCB /* Write DMA ( no retires) */ -#define ATA_CMD_IDENT 0xEC /* Identify Device */ -#define ATA_CMD_SETF 0xEF /* Set Features */ -#define ATA_CMD_CHK_PWR 0xE5 /* Check Power Mode */ - -#define ATA_CMD_READ_EXT 0x24 /* Read Sectors (with retries) with 48bit addressing */ -#define ATA_CMD_WRITE_EXT 0x34 /* Write Sectores (with retries) with 48bit addressing */ -#define ATA_CMD_VRFY_EXT 0x42 /* Read Verify (with retries) with 48bit addressing */ - -#define ATA_CMD_FLUSH 0xE7 /* Flush drive cache */ -#define ATA_CMD_FLUSH_EXT 0xEA /* Flush drive cache, with 48bit addressing */ - /* * ATAPI Commands */ -#define ATAPI_CMD_IDENT 0xA1 /* Identify AT Atachment Packed Interface Device */ -#define ATAPI_CMD_PACKET 0xA0 /* Packed Command */ - - #define ATAPI_CMD_INQUIRY 0x12 #define ATAPI_CMD_REQ_SENSE 0x03 #define ATAPI_CMD_READ_CAP 0x25