From patchwork Sat Feb 8 05:38:37 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Denis 'GNUtoo' Carikli X-Patchwork-Id: 236062 List-Id: U-Boot discussion From: GNUtoo at cyberdimension.org (Denis 'GNUtoo' Carikli) Date: Sat, 8 Feb 2020 06:38:37 +0100 Subject: [PATCH v3][ 4/6] board: tbs2910: enable CONFIG_DISTRO_DEFAULTS In-Reply-To: <20200208053839.7101-1-GNUtoo@cyberdimension.org> References: <20200208053839.7101-1-GNUtoo@cyberdimension.org> Message-ID: <20200208053839.7101-4-GNUtoo@cyberdimension.org> The side effect is that it increase the size of the resultimg image, which is already very close to the size limit. With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, we have the following size increase: - text: 8744 bytes - data: 132 bytes - bss: 60 bytes - total: 8936 bytes Signed-off-by: Denis 'GNUtoo' Carikli --- configs/tbs2910_defconfig | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 5603bef64e..1cf09bb741 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -9,18 +9,15 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_PRE_CON_BUF_ADDR=0x7c000000 CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc; fi" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi" CONFIG_PRE_CONSOLE_BUFFER=y -CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOUNCE_BUFFER=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Matrix U-Boot> " -CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set # CONFIG_BOOTM_VXWORKS is not set @@ -31,22 +28,14 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y -CONFIG_CMD_PART=y CONFIG_CMD_PCI=y CONFIG_CMD_SATA=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_EFI_PARTITION=y +# CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-tbs2910" @@ -76,7 +65,6 @@ CONFIG_RTC_DS1307=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y CONFIG_USB_GADGET=y