From patchwork Tue Jan 28 17:04:18 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Denis 'GNUtoo' Carikli X-Patchwork-Id: 240424 List-Id: U-Boot discussion From: GNUtoo at cyberdimension.org (Denis 'GNUtoo' Carikli) Date: Tue, 28 Jan 2020 18:04:18 +0100 Subject: [PATCH v2][ 3/3] board: tbs2910: Add support for generic distro configuration In-Reply-To: <20200128170418.15912-1-GNUtoo@cyberdimension.org> References: <20200128170418.15912-1-GNUtoo@cyberdimension.org> Message-ID: <20200128170418.15912-3-GNUtoo@cyberdimension.org> This keeps the compatibility with the old bootcmd. The fdtfile environment variable also needed to be set to imx6q-tbs2910.dtb to enable booting mainline kernels otherwise with extlinux.conf it tries to load mx6-tbs2910.dtb instead. Signed-off-by: Denis 'GNUtoo' Carikli --- configs/tbs2910_defconfig | 17 ++++------------- include/configs/tbs2910.h | 37 ++++++++++++++++++++++++++++--------- 2 files changed, 32 insertions(+), 22 deletions(-) diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 0e91eeffd4..0d9e11bd20 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -9,16 +9,16 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_PRE_CON_BUF_ADDR=0x7c000000 CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 +# CONFIG_USE_BOOTCOMMAND is not set CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi" CONFIG_PRE_CONSOLE_BUFFER=y -CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb" CONFIG_BOUNCE_BUFFER=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Matrix U-Boot> " -CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set # CONFIG_BOOTM_VXWORKS is not set @@ -30,22 +30,14 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y -CONFIG_CMD_PART=y CONFIG_CMD_PCI=y CONFIG_CMD_SATA=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_EFI_PARTITION=y +# CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-tbs2910" @@ -75,7 +67,6 @@ CONFIG_RTC_DS1307=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y CONFIG_USB_GADGET=y diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index b598fca1ec..abeca16555 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -8,6 +8,24 @@ #ifndef __TBS2910_CONFIG_H #define __TBS2910_CONFIG_H +#define CONFIG_BOOTCOMMAND \ + "mmc rescan; " \ + "if run bootcmd_up1; then " \ + "run bootcmd_up2; " \ + "else " \ + "run bootcmd_mmc || run distro_bootcmd; " \ + "fi" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 2) \ + func(SATA, sata, 0) \ + func(USB, usb, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) +#include + #include "mx6_common.h" /* General configuration */ @@ -80,6 +98,13 @@ #define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */ #define CONFIG_EXTRA_ENV_SETTINGS \ + "bootm_size=0x80000000\0" \ + "fdt_addr=0x13000000\0" \ + "fdt_addr_r=0x13000000\0" \ + "kernel_addr_r=0x10008000\0" \ + "pxefile_addr_r=0x10008000\0" \ + "ramdisk_addr_r=0x18000000\0" \ + "scriptaddr=0x14000000\0" \ "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \ "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M at 60 " \ "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \ @@ -102,14 +127,8 @@ "setenv stderr serial,vga\0" \ "stderr=serial,vga\0" \ "stdin=serial,usbkbd\0" \ - "stdout=serial,vga\0" - -#define CONFIG_BOOTCOMMAND \ - "mmc rescan; " \ - "if run bootcmd_up1; then " \ - "run bootcmd_up2; " \ - "else " \ - "run bootcmd_mmc; " \ - "fi" + "stdout=serial,vga\0" \ + "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ + BOOTENV #endif /* __TBS2910_CONFIG_H * */