@@ -254,7 +254,7 @@ const struct am654_driver_data j721e_4bit_drv_data = {
.flags = IOMUX_PRESENT,
};
-int am654_sdhci_init(struct am654_sdhci_plat *plat)
+int am654_sdhci_init_phy(struct am654_sdhci_plat *plat)
{
u32 ctl_cfg_2 = 0;
u32 mask, val;
@@ -331,8 +331,37 @@ static int sdhci_am654_get_otap_delay(struct udevice *dev,
return 0;
}
+#define MAX_SDCD_DEBOUNCE_TIME 2000
+int am654_sdhci_init(struct udevice *dev)
+{
+ struct am654_sdhci_plat *plat = dev_get_platdata(dev);
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+ struct sdhci_host *host = mmc->priv;
+ unsigned long start;
+ int val;
+
+ /*
+ * The controller takes about 1 second to debounce the card detect line
+ * and doesn't let us power on until that time is up. Instead of waiting
+ * for 1 second at every stage, poll on the CARD_PRESENT bit upto a
+ * maximum of 2 seconds to be safe..
+ */
+ start = get_timer(0);
+ do {
+ if (get_timer(start) > MAX_SDCD_DEBOUNCE_TIME)
+ return -ENOMEDIUM;
+
+ val = mmc_getcd(host->mmc);
+ } while (!val);
+
+ am654_sdhci_init_phy(plat);
+
+ return sdhci_init(mmc);
+}
+
static int am654_sdhci_probe(struct udevice *dev)
{
+ struct dm_mmc_ops *ops = mmc_get_ops(dev);
struct am654_driver_data *drv_data =
(struct am654_driver_data *)dev_get_driver_data(dev);
struct am654_sdhci_plat *plat = dev_get_platdata(dev);
@@ -373,9 +402,9 @@ static int am654_sdhci_probe(struct udevice *dev)
regmap_init_mem_index(dev_ofnode(dev), &plat->base, 1);
- am654_sdhci_init(plat);
+ ops->init = am654_sdhci_init;
- return sdhci_probe(dev);
+ return 0;
}
static int am654_sdhci_ofdata_to_platdata(struct udevice *dev)
The 4 bit MMC controllers have an internal debounce for the SDCD line with a debounce delay of 1 second. Therefore, after clocks to the IP are enabled, software has to wait for this time before it can power on the controller. Add an init() callback which polls on sdcd for a maximum of 2 seconds before switching on power to the controller or (in the case of no card) returning a ENOMEDIUM. This pushes the 1 second wait time to when the card is actually needed rather than at every probe() making sure that users who don't insert an SD card in the slot don't have to wait such a long time. Signed-off-by: Faiz Abbas <faiz_abbas at ti.com> --- drivers/mmc/am654_sdhci.c | 35 ++++++++++++++++++++++++++++++++--- 1 file changed, 32 insertions(+), 3 deletions(-)