From patchwork Mon Jan 20 16:31:02 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alifer Moraes X-Patchwork-Id: 239826 List-Id: U-Boot discussion From: alifer.wsdm at gmail.com (Alifer Moraes) Date: Mon, 20 Jan 2020 13:31:02 -0300 Subject: [PATCH 2/4] mx6sabresd: Convert PCI to driver model In-Reply-To: <20200120163104.32487-1-alifer.wsdm@gmail.com> References: <20200120163104.32487-1-alifer.wsdm@gmail.com> Message-ID: <20200120163104.32487-2-alifer.wsdm@gmail.com> Convert imx6sabresd PCI to driver model to fix the following warning: Reviewed-by: Fabio Estevam ===================== WARNING ====================== This board does not use CONFIG_DM_PCI Please update the board to use CONFIG_DM_PCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== After the conversion the following commands were used for testing: => pci enum PCI: Failed autoconfig bar 10 PCI: Failed autoconfig bar 10 => pci 1 Scanning PCI devices on bus 1 BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 01.00.00 0x8086 0x08b1 Network controller 0x80 Signed-off-by: Alifer Moraes --- board/freescale/mx6sabresd/mx6sabresd.c | 11 ----------- configs/mx6sabresd_defconfig | 1 + 2 files changed, 1 insertion(+), 11 deletions(-) diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index b346ca4ced..4a208277ac 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -231,16 +231,6 @@ static void setup_spi(void) SETUP_IOMUX_PADS(ecspi1_pads); } -iomux_v3_cfg_t const pcie_pads[] = { - IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* POWER */ - IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* RESET */ -}; - -static void setup_pcie(void) -{ - SETUP_IOMUX_PADS(pcie_pads); -} - iomux_v3_cfg_t const di0_pads[] = { IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK), /* DISP0_CLK */ IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02), /* DISP0_HSYNC */ @@ -508,7 +498,6 @@ int overwrite_console(void) int board_eth_init(bd_t *bis) { setup_iomux_enet(); - setup_pcie(); return cpu_eth_init(bis); } diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 0bd686ec86..e3b8908928 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -83,6 +83,7 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_MII=y CONFIG_PCI=y +CONFIG_DM_PCI=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_REGULATOR=y