@@ -1192,7 +1192,6 @@ config TARGET_LS2081ARDB
config TARGET_LX2160ARDB
bool "Support lx2160ardb"
select ARCH_LX2160A
- select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
@@ -1206,7 +1205,6 @@ config TARGET_LX2160ARDB
config TARGET_LX2160AQDS
bool "Support lx2160aqds"
select ARCH_LX2160A
- select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
@@ -579,8 +579,8 @@ void detail_board_ddr_info(void)
print_ddr_info(0);
}
-#if defined(CONFIG_ARCH_MISC_INIT)
-int arch_misc_init(void)
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
{
config_board_mux();
@@ -16,6 +16,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_GPT=y
@@ -17,6 +17,7 @@ CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_GPT=y
@@ -17,6 +17,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_GPT=y
@@ -18,6 +18,7 @@ CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_GPT=y
Currently LX2 board code uses arch_misc_init to set up the board mux on RDB and QDS. Move this code to misc_init_r. This is consistent with LS gen 2 and T series SoCs/boards. Signed-off-by: Alex Marginean <alexandru.marginean at nxp.com> --- arch/arm/Kconfig | 2 -- board/freescale/lx2160a/lx2160a.c | 4 ++-- configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/lx2160aqds_tfa_defconfig | 1 + configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/lx2160ardb_tfa_defconfig | 1 + 6 files changed, 6 insertions(+), 4 deletions(-)