diff mbox series

[v2,07/19] configs: meson: change default load addresses

Message ID 20181122090740.29739-8-narmstrong@baylibre.com
State Accepted
Commit f58d633e538858bf1ccdb93d5b5dc8edc368e30e
Headers show
Series [v2,01/19] ARM: meson: clean-up platform selection | expand

Commit Message

Neil Armstrong Nov. 22, 2018, 9:07 a.m. UTC 
From: Jerome Brunet <jbrunet@baylibre.com>

The original chosen addresses conflict with the BL2 initialisation.
So far there was no issue with them but if we preload binaries in
RAM (ROMUSB boot) before running the BL2 they get corrupted by the
execution of BL2 init.

If we load them around 0x08000000, there is no such issue.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 include/configs/meson64.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/include/configs/meson64.h b/include/configs/meson64.h
index 1929a3e406..80c883e3f4 100644
--- a/include/configs/meson64.h
+++ b/include/configs/meson64.h
@@ -41,9 +41,9 @@ 
 
 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"fdt_addr_r=0x01000000\0" \
-	"scriptaddr=0x1f000000\0" \
-	"kernel_addr_r=0x01080000\0" \
+	"fdt_addr_r=0x08008000\0" \
+	"scriptaddr=0x08000000\0" \
+	"kernel_addr_r=0x08080000\0" \
 	"pxefile_addr_r=0x01080000\0" \
 	"ramdisk_addr_r=0x13000000\0" \
 	"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \