| Message ID | 20181107150514.23479-1-m.szyprowski@samsung.com |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: Exynos: Add TM2 board support | expand |
Dear Marek Szyprowski, On 08/11/18 00:05, Marek Szyprowski wrote: > This patch adds support for Exynos5433 based TM2 and TM2e boards. > > u-boot is used to load and decompress kernel image or alternatively > (when 'volume down' button is pressed during boot) provide THOR download > USB feature for flashing kernel and rootfs images. > > Based on earlier work done by Lukasz Majewski <l.majewski@samsung.com>. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > arch/arm/dts/Makefile | 3 + > arch/arm/dts/exynos5433-tm2.dts | 37 ++++++++++ > arch/arm/mach-exynos/Kconfig | 14 ++++ > board/samsung/tm2/Kconfig | 14 ++++ > board/samsung/tm2/Makefile | 8 ++ > board/samsung/tm2/tm2.c | 127 ++++++++++++++++++++++++++++++++ > configs/tm2_defconfig | 52 +++++++++++++ > include/configs/tm2.h | 60 +++++++++++++++ > 8 files changed, 315 insertions(+) > create mode 100644 arch/arm/dts/exynos5433-tm2.dts > create mode 100644 board/samsung/tm2/Kconfig > create mode 100644 board/samsung/tm2/Makefile > create mode 100644 board/samsung/tm2/tm2.c > create mode 100644 configs/tm2_defconfig > create mode 100644 include/configs/tm2.h > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index d36447d18d..f8c671589a 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -25,6 +25,9 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ > exynos5800-peach-pi.dtb \ > exynos5422-odroidxu3.dtb > dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb > + > +dtb-$(CONFIG_TARGET_TM2) += exynos5433-tm2.dtb > + > dtb-$(CONFIG_ARCH_ROCKCHIP) += \ > rk3036-sdk.dtb \ > rk3128-evb.dtb \ > diff --git a/arch/arm/dts/exynos5433-tm2.dts b/arch/arm/dts/exynos5433-tm2.dts > new file mode 100644 > index 0000000000..c9b178efdc > --- /dev/null > +++ b/arch/arm/dts/exynos5433-tm2.dts > @@ -0,0 +1,37 @@ > +/* > + * TM2 device tree source > + * > + * Copyright (c) 2018 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +/dts-v1/; > +#include "exynos5433.dtsi" > + > +/ { > + model = "TM2 based on EXYNOS5433"; > + compatible = "samsung,tm2", "samsung,exynos5433"; > + > + aliases { > + serial0 = &serial_1; > + console = &serial_1; > + i2c0 = &i2c; > + }; > + > + i2c: i2c { > + compatible = "i2c-gpio"; > + gpios = <&gpb0 0 0>, /* sda */ > + <&gpb0 1 0>; /* scl */ > + i2c-gpio,delay-us = <2>; /* ~100 kHz */ > + }; > +}; > + > +&mmc_0 { > + status = "okay"; > +}; > + > +&serial_1 { > + status = "okay"; > +}; > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index 4a49c8dcc2..cf3bed57f3 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -137,6 +137,19 @@ config TARGET_PEACH_PIT > endchoice > endif > > +if ARCH_EXYNOS5433 > + > +choice > + prompt "EXYNOS5433 board select" > + > +config TARGET_TM2 > + bool "TM2 board" > + select ARM64 > + select OF_CONTROL > + > +endchoice > +endif > + > if ARCH_EXYNOS7 > > choice > @@ -168,6 +181,7 @@ source "board/samsung/odroid/Kconfig" > source "board/samsung/arndale/Kconfig" > source "board/samsung/smdk5250/Kconfig" > source "board/samsung/smdk5420/Kconfig" > +source "board/samsung/tm2/Kconfig" > source "board/samsung/espresso7420/Kconfig" > > config SPL_LDSCRIPT > diff --git a/board/samsung/tm2/Kconfig b/board/samsung/tm2/Kconfig > new file mode 100644 > index 0000000000..745faf6a95 > --- /dev/null > +++ b/board/samsung/tm2/Kconfig > @@ -0,0 +1,14 @@ > +if TARGET_TM2 > + > +config SYS_BOARD > + default "tm2" > + help > + TM2 is Exynos5433 SoC based board, Tizen reference board. > + > +config SYS_VENDOR > + default "samsung" > + > +config SYS_CONFIG_NAME > + default "tm2" > + > +endif > diff --git a/board/samsung/tm2/Makefile b/board/samsung/tm2/Makefile > new file mode 100644 > index 0000000000..53621774dd > --- /dev/null > +++ b/board/samsung/tm2/Makefile > @@ -0,0 +1,8 @@ > +# > +# Copyright (c) 2016 Samsung Electronics Co., Ltd. All rights reserved. > +# Lukasz Majewski <l.majewski@samsung.com> > +# > +# SPDX-License-Identifier: GPL-2.0+ > +# > + > +obj-y := tm2.o > diff --git a/board/samsung/tm2/tm2.c b/board/samsung/tm2/tm2.c > new file mode 100644 > index 0000000000..31ec8f5641 > --- /dev/null > +++ b/board/samsung/tm2/tm2.c > @@ -0,0 +1,127 @@ > +/* > + * (C) Copyright 2018 Samsung > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > +#include <common.h> > +#include <dm.h> > +#include <errno.h> > +#include <malloc.h> > +#include <dwc3-uboot.h> > +#include <asm/armv8/mmu.h> > +#include <asm/arch/dwmmc.h> > +#include <usb.h> > +#include <dwc3-uboot.h> > +#include <asm/arch/cpu.h> > +#include <asm/arch/power.h> > +#include <asm/gpio.h> > + > +DECLARE_GLOBAL_DATA_PTR; > + > +int board_init(void) > +{ > + /* start Multi Core Timer to get ARM Architected Timers working */ > + writel(1 << 8, 0x101c0240); > + return 0; > +} > + > +int dram_init(void) > +{ > + gd->ram_size = PHYS_SDRAM_1_SIZE; > + return 0; > +} > + > +int dram_init_banksize(void) > +{ > + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; > + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; > + return 0; > +} > + > +unsigned long get_uart_clk(int id) > +{ > + return 200000000; > +} > + > +unsigned long get_mmc_clk(int id) > +{ > + return 100000000; > +} > + > +unsigned long set_mmc_clk(int id, int div) > +{ > + return 0; > +} > + > +unsigned long get_i2c_clk(int id) > +{ > + return 66666667; > +} No. get_xxx_clk should not be here. > + > +#ifdef CONFIG_USB_DWC3 > +static struct dwc3_device dwc3_device_data = { > + .maximum_speed = USB_SPEED_SUPER, > + .base = 0x15400000, > + .dr_mode = USB_DR_MODE_PERIPHERAL, > + .index = 0, > +}; > + > +int usb_gadget_handle_interrupts(void) > +{ > + dwc3_uboot_handle_interrupt(0); > + return 0; > +} > + > +int board_usb_init(int index, enum usb_init_type init) > +{ > + void *base = (void *)0x15500000; /* Exynos5433 DRD PHY */ > + > + /* CMU TOP: set SCLK_USBDRD30_RATIO divider to 1 */ > + writel(0x0007770b, (void *)0x10030634); > + > + /* CMU FSYS: set PHYCLK_USBDRD30_UDRD30_PHYCLOCK and > + PHYCLK_USBDRD30_UDRD30_PIPE_PCLK muxes to 1 */ > + writel(0x00000011, (void *)0x156e0208); > + > + /* CMU FSYS: enable MUX_SCLK_USBDRD30_USER gate and > + keep other gates enabled */ > + writel(0x01101001, (void *)0x156e0204); > + > + /* CMU: TOP: set MUX_SCLK_USBDRD30 mux source to pll */ > + writel(0x00000101, (void *)0x10030234); > + > + /* PMU: bypass USB DEV PHY isolation */ > + writel(0x00000001, (void *)0x105c0704); > + > + /* copied from Linux kernel register dump */ > + writel(0x0, base + 0x14); > + writel(0x0, base + 0x34); > + writel(0x8000040, base + 0x4); > + writel(0x24d466e4, base + 0x1c); > + writel(0x4, base + 0x30); > + writel(0x24d466e4, base + 0x1c); > + writel(0x3fff81c, base + 0x20); > + writel(0x40, base + 0x8); > + writel(0x0, base + 0x28); > + writel(0xc41805bf, base + 0x10); > + udelay(10); > + writel(0xc41805bd, base + 0x10); > + writel(0x3fff81c, base + 0x20); > + writel(0x0, base + 0x28); > + writel(0xc41b40bf, base + 0x10); > + udelay(10); > + writel(0xc41b40bd, base + 0x10); Too many magic values. I don't want accept it. > + > + return dwc3_uboot_init(&dwc3_device_data); > +} > +#endif > + > +int checkboard(void) > +{ > + const char *board_info; > + > + board_info = fdt_getprop(gd->fdt_blob, 0, "model", NULL); > + printf("Board: %s\n", board_info ? board_info : "unknown"); > + > + return 0; > +} > diff --git a/configs/tm2_defconfig b/configs/tm2_defconfig > new file mode 100644 > index 0000000000..4080366c97 > --- /dev/null > +++ b/configs/tm2_defconfig > @@ -0,0 +1,52 @@ > +CONFIG_ARM=y > +# CONFIG_ARM64_SUPPORT_AARCH32 is not set > +CONFIG_ARCH_EXYNOS=y > +CONFIG_SYS_TEXT_BASE=0x20080000 > +CONFIG_ARCH_EXYNOS5433=y > +CONFIG_SYS_MALLOC_F_LEN=0x2000 > +CONFIG_IDENT_STRING="\nSamsung Exynos5433 TM2" > +CONFIG_FIT=y > +CONFIG_BOOTDELAY=-2 > +CONFIG_SYS_CONSOLE_INFO_QUIET=y > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_HUSH_PARSER=y > +# CONFIG_CMD_CONSOLE is not set > +# CONFIG_CMD_ELF is not set > +# CONFIG_CMD_GO is not set > +CONFIG_CMD_THOR_DOWNLOAD=y > +# CONFIG_CMD_EXPORTENV is not set > +# CONFIG_CMD_IMPORTENV is not set > +# CONFIG_CMD_EDITENV is not set > +# CONFIG_CMD_SAVEENV is not set > +# CONFIG_CMD_ENV_EXISTS is not set > +# CONFIG_CMD_DM is not set > +# CONFIG_CMD_FLASH is not set > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_GPT=y > +# CONFIG_RANDOM_UUID is not set > +CONFIG_CMD_I2C=y > +# CONFIG_CMD_LOADB is not set > +# CONFIG_CMD_LOADS is not set > +CONFIG_CMD_MMC=y > +CONFIG_CMD_PART=y > +# CONFIG_CMD_SOURCE is not set > +# CONFIG_CMD_SETEXPR is not set > +# CONFIG_CMD_NET is not set > +CONFIG_CMD_FS_GENERIC=y > +CONFIG_DEFAULT_DEVICE_TREE="exynos5433-tm2" > +# CONFIG_DM_DEVICE_REMOVE is not set > +CONFIG_DFU_MMC=y > +CONFIG_DM_I2C_GPIO=y > +CONFIG_DM_MMC=y > +CONFIG_MMC_DW=y > +CONFIG_USB=y > +CONFIG_USB_DWC3=y > +CONFIG_USB_DWC3_GADGET=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_VENDOR_NUM=0x04e8 > +CONFIG_USB_GADGET_PRODUCT_NUM=0x685D > +CONFIG_USB_GADGET_DOWNLOAD=y > +CONFIG_USB_FUNCTION_MASS_STORAGE=y > +CONFIG_USB_FUNCTION_THOR=y > +# CONFIG_SYS_WHITE_ON_BLACK is not set > +# CONFIG_EFI_LOADER is not set > diff --git a/include/configs/tm2.h b/include/configs/tm2.h > new file mode 100644 > index 0000000000..ce656b494a > --- /dev/null > +++ b/include/configs/tm2.h > @@ -0,0 +1,60 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (C) 2018 Samsung Electronics > + * Marek Szyprowski <m.szyprowski@samsung.com> > + * > + * Configuation settings for the Exynos5433 TM2 board. > + */ > + > +#ifndef __SAMSUNG_TM2_H > +#define __SAMSUNG_TM2_H > + > +#include <asm/arch/cpu.h> > +#include <linux/sizes.h> > + > +/* High Level Configuration Options */ > +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ > +#define CONFIG_EXYNOS5433 /* Exynos5433 Family */ > +#define CONFIG_S5P > + > +/* Timer input clock frequency */ > +#define COUNTER_FREQUENCY 24000000 > + > +/* SD/MMC configuration */ > +#define CONFIG_BOUNCE_BUFFER > + > +/* THOR */ > +#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM > +#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D > + > +/* required to avoid build break */ > +#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM > +#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 > + > +#define PHYS_SDRAM_1 0x20000000 > +#define PHYS_SDRAM_1_SIZE 0xbf700000 > + > +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 > +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) > +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) > + > +/* Size of malloc() pool */ > +#define CONFIG_SYS_MALLOC_LEN (80 << 20) > +#define CONFIG_SYS_BOOTM_LEN (130 << 20) > + > +/* Initial environment variables */ > +#define CONFIG_BOOTCOMMAND "run modedetect" > +#define CONFIG_EXTRA_ENV_SETTINGS "dfu_alt_info=kernel part 0 9 offset 0x400;rootfs part 0 18;system-data part 0 19;user part 0 21\0" \ > + "modedetect=if gpio input gpa21 || itest.l *0x105c080c == 0x12345671; then run download; else run bootkernel; fi; reset\0" \ > + "fdt_high=0xffffffffffffffff\0" \ > + "bootargs=console=ttySAC1,115200 earlycon=exynos4210,0x14C20000 ess_setup=0x26000000 loglevel=7 root=/dev/mmcblk0p18 rootfstype=ext4 rootwait\0" \ > + "bootkernel=echo Booting kernel; run boarddetect; run loadkernel; bootm 0x30080000#$board\0" \ > + "boarddetect=if itest.l *0x138000b4 == 0x0063f9ff; then setenv board tm2e; elif itest.l *0x138000b4 == 0x0059f9ff; then setenv board tm2; else setenv board unknown; fi; echo Detected $board board\0" \ > + "loadkernel=part start mmc 0 9 kernel_sect; part size mmc 0 9 kernel_size; mmc read 0x30000000 $kernel_sect $kernel_size\0" \ > + "muicsetusb=i2c dev 0; i2c mw 25 c 9; i2c mw 25 d 3b; i2c mw 25 e 05; i2c mw 25 16 10\0" \ > + "displayimg=unzip 200d0000 67000000; mw.l 138000b4 0059f9ff; mw.l 138001a0 67e10000; mw.l 13800200 00001680; mw.l 13801410 1; mw.l 13802040 e0000018; sleep 1; mw.l 13802040 e0000008\0" \ > + "download=echo Thor mode enabled; run muicsetusb; run displayimg; mw.l 0x105c080c 0; thor 0 mmc 0\0" Please keep 80 characters. > + > +#define CONFIG_ENV_SIZE 0x1000 > + > +#endif /* __SAMSUNG_TM2_H */ > Thanks, Minkyu Kang.
On Wed, 07 Nov 2018 16:05:14 +0100 Marek Szyprowski <m.szyprowski@samsung.com> wrote: General remark - could you run your patches (the whole series) through the buildman? ./tools/buildman/buildman.py --branch=HEAD samsung --detail --verbose --show_errors --force-build --count=9 --output-dir=../BUILD/ > This patch adds support for Exynos5433 based TM2 and TM2e boards. > > u-boot is used to load and decompress kernel image or alternatively > (when 'volume down' button is pressed during boot) provide THOR > download USB feature for flashing kernel and rootfs images. > > Based on earlier work done by Lukasz Majewski > <l.majewski@samsung.com>. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > arch/arm/dts/Makefile | 3 + > arch/arm/dts/exynos5433-tm2.dts | 37 ++++++++++ > arch/arm/mach-exynos/Kconfig | 14 ++++ > board/samsung/tm2/Kconfig | 14 ++++ > board/samsung/tm2/Makefile | 8 ++ > board/samsung/tm2/tm2.c | 127 > ++++++++++++++++++++++++++++++++ configs/tm2_defconfig | > 52 +++++++++++++ include/configs/tm2.h | 60 +++++++++++++++ > 8 files changed, 315 insertions(+) > create mode 100644 arch/arm/dts/exynos5433-tm2.dts > create mode 100644 board/samsung/tm2/Kconfig > create mode 100644 board/samsung/tm2/Makefile > create mode 100644 board/samsung/tm2/tm2.c > create mode 100644 configs/tm2_defconfig > create mode 100644 include/configs/tm2.h > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index d36447d18d..f8c671589a 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -25,6 +25,9 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ > exynos5800-peach-pi.dtb \ > exynos5422-odroidxu3.dtb > dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb > + > +dtb-$(CONFIG_TARGET_TM2) += exynos5433-tm2.dtb > + Those blank lines could be removed. > dtb-$(CONFIG_ARCH_ROCKCHIP) += \ > rk3036-sdk.dtb \ > rk3128-evb.dtb \ > diff --git a/arch/arm/dts/exynos5433-tm2.dts > b/arch/arm/dts/exynos5433-tm2.dts new file mode 100644 > index 0000000000..c9b178efdc > --- /dev/null > +++ b/arch/arm/dts/exynos5433-tm2.dts > @@ -0,0 +1,37 @@ > +/* > + * TM2 device tree source > + * > + * Copyright (c) 2018 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ If the file is from the Linux kernel - please provide proper SHA1. > + > +/dts-v1/; > +#include "exynos5433.dtsi" > + > +/ { > + model = "TM2 based on EXYNOS5433"; > + compatible = "samsung,tm2", "samsung,exynos5433"; > + > + aliases { > + serial0 = &serial_1; > + console = &serial_1; > + i2c0 = &i2c; > + }; > + > + i2c: i2c { > + compatible = "i2c-gpio"; > + gpios = <&gpb0 0 0>, /* sda */ > + <&gpb0 1 0>; /* scl */ > + i2c-gpio,delay-us = <2>; /* ~100 kHz */ > + }; > +}; > + > +&mmc_0 { > + status = "okay"; > +}; > + > +&serial_1 { > + status = "okay"; > +}; > diff --git a/arch/arm/mach-exynos/Kconfig > b/arch/arm/mach-exynos/Kconfig index 4a49c8dcc2..cf3bed57f3 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -137,6 +137,19 @@ config TARGET_PEACH_PIT > endchoice > endif > > +if ARCH_EXYNOS5433 > + > +choice > + prompt "EXYNOS5433 board select" > + > +config TARGET_TM2 > + bool "TM2 board" > + select ARM64 > + select OF_CONTROL I do have a feeling that there should be more options added here from the tm2.h file. Also please check if the board compiles after enabling CONFIG_BLK (as it will be enabled by default very soon). > + > +endchoice > +endif > + > if ARCH_EXYNOS7 > > choice > @@ -168,6 +181,7 @@ source "board/samsung/odroid/Kconfig" > source "board/samsung/arndale/Kconfig" > source "board/samsung/smdk5250/Kconfig" > source "board/samsung/smdk5420/Kconfig" > +source "board/samsung/tm2/Kconfig" > source "board/samsung/espresso7420/Kconfig" > > config SPL_LDSCRIPT > diff --git a/board/samsung/tm2/Kconfig b/board/samsung/tm2/Kconfig > new file mode 100644 > index 0000000000..745faf6a95 > --- /dev/null > +++ b/board/samsung/tm2/Kconfig > @@ -0,0 +1,14 @@ > +if TARGET_TM2 > + > +config SYS_BOARD > + default "tm2" > + help > + TM2 is Exynos5433 SoC based board, Tizen reference board. > + > +config SYS_VENDOR > + default "samsung" > + > +config SYS_CONFIG_NAME > + default "tm2" > + > +endif > diff --git a/board/samsung/tm2/Makefile b/board/samsung/tm2/Makefile > new file mode 100644 > index 0000000000..53621774dd > --- /dev/null > +++ b/board/samsung/tm2/Makefile > @@ -0,0 +1,8 @@ > +# > +# Copyright (c) 2016 Samsung Electronics Co., Ltd. All rights > reserved. +# Lukasz Majewski <l.majewski@samsung.com> I would not be the only author here :-) > +# > +# SPDX-License-Identifier: GPL-2.0+ > +# > + > +obj-y := tm2.o > diff --git a/board/samsung/tm2/tm2.c b/board/samsung/tm2/tm2.c > new file mode 100644 > index 0000000000..31ec8f5641 > --- /dev/null > +++ b/board/samsung/tm2/tm2.c > @@ -0,0 +1,127 @@ > +/* > + * (C) Copyright 2018 Samsung Please be consistent with the Copyright in the patch series. Either it is all added by only Samsung or by its developers. > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > +#include <common.h> > +#include <dm.h> > +#include <errno.h> > +#include <malloc.h> > +#include <dwc3-uboot.h> > +#include <asm/armv8/mmu.h> > +#include <asm/arch/dwmmc.h> > +#include <usb.h> > +#include <dwc3-uboot.h> > +#include <asm/arch/cpu.h> > +#include <asm/arch/power.h> > +#include <asm/gpio.h> > + > +DECLARE_GLOBAL_DATA_PTR; > + > +int board_init(void) > +{ > + /* start Multi Core Timer to get ARM Architected Timers > working */ > + writel(1 << 8, 0x101c0240); Could it be more verbose - by more comments or define? > + return 0; > +} > + > +int dram_init(void) > +{ > + gd->ram_size = PHYS_SDRAM_1_SIZE; > + return 0; > +} > + > +int dram_init_banksize(void) > +{ > + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; > + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; > + return 0; > +} The memory information could be read from DTS > + > +unsigned long get_uart_clk(int id) > +{ > + return 200000000; > +} > + > +unsigned long get_mmc_clk(int id) > +{ > + return 100000000; > +} > + > +unsigned long set_mmc_clk(int id, int div) > +{ > + return 0; > +} > + > +unsigned long get_i2c_clk(int id) > +{ > + return 66666667; This shall be read and calculated from the IP block (please provide in the comment the formula as well). > +} > + > +#ifdef CONFIG_USB_DWC3 > +static struct dwc3_device dwc3_device_data = { > + .maximum_speed = USB_SPEED_SUPER, > + .base = 0x15400000, > + .dr_mode = USB_DR_MODE_PERIPHERAL, > + .index = 0, > +}; IIRC there were floating some patches which were converting the UDC for dwc3 to driver model (IIRC from Nexell). > + > +int usb_gadget_handle_interrupts(void) > +{ > + dwc3_uboot_handle_interrupt(0); > + return 0; > +} > + > +int board_usb_init(int index, enum usb_init_type init) > +{ > + void *base = (void *)0x15500000; /* Exynos5433 DRD PHY */ > + > + /* CMU TOP: set SCLK_USBDRD30_RATIO divider to 1 */ > + writel(0x0007770b, (void *)0x10030634); > + > + /* CMU FSYS: set PHYCLK_USBDRD30_UDRD30_PHYCLOCK and > + PHYCLK_USBDRD30_UDRD30_PIPE_PCLK muxes to 1 */ > + writel(0x00000011, (void *)0x156e0208); > + > + /* CMU FSYS: enable MUX_SCLK_USBDRD30_USER gate and > + keep other gates enabled */ > + writel(0x01101001, (void *)0x156e0204); > + > + /* CMU: TOP: set MUX_SCLK_USBDRD30 mux source to pll */ > + writel(0x00000101, (void *)0x10030234); > + > + /* PMU: bypass USB DEV PHY isolation */ > + writel(0x00000001, (void *)0x105c0704); > + The above code shall used defines for registers (best matching the in-documentation names). Please also used (1UL << XX) for setting bits. > + /* copied from Linux kernel register dump */ > + writel(0x0, base + 0x14); > + writel(0x0, base + 0x34); > + writel(0x8000040, base + 0x4); > + writel(0x24d466e4, base + 0x1c); > + writel(0x4, base + 0x30); > + writel(0x24d466e4, base + 0x1c); > + writel(0x3fff81c, base + 0x20); > + writel(0x40, base + 0x8); > + writel(0x0, base + 0x28); > + writel(0xc41805bf, base + 0x10); > + udelay(10); > + writel(0xc41805bd, base + 0x10); > + writel(0x3fff81c, base + 0x20); > + writel(0x0, base + 0x28); > + writel(0xc41b40bf, base + 0x10); > + udelay(10); > + writel(0xc41b40bd, base + 0x10); > + Is there any explanation for this "magic" sequence? > + return dwc3_uboot_init(&dwc3_device_data); > +} > +#endif > + > +int checkboard(void) > +{ > + const char *board_info; > + > + board_info = fdt_getprop(gd->fdt_blob, 0, "model", NULL); > + printf("Board: %s\n", board_info ? board_info : "unknown"); > + > + return 0; > +} > diff --git a/configs/tm2_defconfig b/configs/tm2_defconfig > new file mode 100644 > index 0000000000..4080366c97 > --- /dev/null > +++ b/configs/tm2_defconfig > @@ -0,0 +1,52 @@ > +CONFIG_ARM=y > +# CONFIG_ARM64_SUPPORT_AARCH32 is not set > +CONFIG_ARCH_EXYNOS=y > +CONFIG_SYS_TEXT_BASE=0x20080000 > +CONFIG_ARCH_EXYNOS5433=y > +CONFIG_SYS_MALLOC_F_LEN=0x2000 > +CONFIG_IDENT_STRING="\nSamsung Exynos5433 TM2" > +CONFIG_FIT=y > +CONFIG_BOOTDELAY=-2 > +CONFIG_SYS_CONSOLE_INFO_QUIET=y > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_HUSH_PARSER=y > +# CONFIG_CMD_CONSOLE is not set > +# CONFIG_CMD_ELF is not set > +# CONFIG_CMD_GO is not set > +CONFIG_CMD_THOR_DOWNLOAD=y > +# CONFIG_CMD_EXPORTENV is not set > +# CONFIG_CMD_IMPORTENV is not set > +# CONFIG_CMD_EDITENV is not set > +# CONFIG_CMD_SAVEENV is not set > +# CONFIG_CMD_ENV_EXISTS is not set > +# CONFIG_CMD_DM is not set > +# CONFIG_CMD_FLASH is not set > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_GPT=y > +# CONFIG_RANDOM_UUID is not set > +CONFIG_CMD_I2C=y > +# CONFIG_CMD_LOADB is not set > +# CONFIG_CMD_LOADS is not set > +CONFIG_CMD_MMC=y > +CONFIG_CMD_PART=y > +# CONFIG_CMD_SOURCE is not set > +# CONFIG_CMD_SETEXPR is not set > +# CONFIG_CMD_NET is not set > +CONFIG_CMD_FS_GENERIC=y > +CONFIG_DEFAULT_DEVICE_TREE="exynos5433-tm2" > +# CONFIG_DM_DEVICE_REMOVE is not set > +CONFIG_DFU_MMC=y > +CONFIG_DM_I2C_GPIO=y > +CONFIG_DM_MMC=y > +CONFIG_MMC_DW=y > +CONFIG_USB=y > +CONFIG_USB_DWC3=y > +CONFIG_USB_DWC3_GADGET=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_VENDOR_NUM=0x04e8 > +CONFIG_USB_GADGET_PRODUCT_NUM=0x685D > +CONFIG_USB_GADGET_DOWNLOAD=y > +CONFIG_USB_FUNCTION_MASS_STORAGE=y > +CONFIG_USB_FUNCTION_THOR=y > +# CONFIG_SYS_WHITE_ON_BLACK is not set > +# CONFIG_EFI_LOADER is not set > diff --git a/include/configs/tm2.h b/include/configs/tm2.h > new file mode 100644 > index 0000000000..ce656b494a > --- /dev/null > +++ b/include/configs/tm2.h > @@ -0,0 +1,60 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (C) 2018 Samsung Electronics > + * Marek Szyprowski <m.szyprowski@samsung.com> > + * > + * Configuation settings for the Exynos5433 TM2 board. > + */ > + > +#ifndef __SAMSUNG_TM2_H > +#define __SAMSUNG_TM2_H > + > +#include <asm/arch/cpu.h> > +#include <linux/sizes.h> > + > +/* High Level Configuration Options */ > +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ > +#define CONFIG_EXYNOS5433 /* Exynos5433 Family */ > +#define CONFIG_S5P > + Above defines shall be placed in _defconfig file. > +/* Timer input clock frequency */ > +#define COUNTER_FREQUENCY 24000000 The same with this. > + > +/* SD/MMC configuration */ > +#define CONFIG_BOUNCE_BUFFER > + > +/* THOR */ > +#define CONFIG_G_DNL_THOR_VENDOR_NUM > CONFIG_USB_GADGET_VENDOR_NUM +#define > CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D + > +/* required to avoid build break */ > +#define CONFIG_G_DNL_UMS_VENDOR_NUM > CONFIG_USB_GADGET_VENDOR_NUM +#define > CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 + Could this be moved to Kconfig? > +#define PHYS_SDRAM_1 0x20000000 > +#define PHYS_SDRAM_1_SIZE 0xbf700000 > + > +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 > +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + > 0x7fff0) +#define CONFIG_SYS_LOAD_ADDR > (CONFIG_SYS_SDRAM_BASE + 0x80000) + > +/* Size of malloc() pool */ > +#define CONFIG_SYS_MALLOC_LEN (80 << 20) > +#define CONFIG_SYS_BOOTM_LEN (130 << 20) > + IIRC above defines could be specified in the Kconfig (Also please use SZ1M* instead of << 20). > +/* Initial environment variables */ > +#define CONFIG_BOOTCOMMAND "run modedetect" BOOTCOMMAND can be specified in Kconfig. > +#define CONFIG_EXTRA_ENV_SETTINGS "dfu_alt_info=kernel part 0 > 9 offset 0x400;rootfs part 0 18;system-data part 0 19;user part 0 > 21\0" \ > + "modedetect=if gpio input > gpa21 || itest.l *0x105c080c == 0x12345671; then run download; else > run bootkernel; fi; reset\0" \ > + "fdt_high=0xffffffffffffffff\0" > \ > + "bootargs=console=ttySAC1,115200 > earlycon=exynos4210,0x14C20000 ess_setup=0x26000000 loglevel=7 > root=/dev/mmcblk0p18 rootfstype=ext4 rootwait\0" \ > + "bootkernel=echo Booting > kernel; run boarddetect; run loadkernel; bootm 0x30080000#$board\0" \ > + "boarddetect=if itest.l > *0x138000b4 == 0x0063f9ff; then setenv board tm2e; elif itest.l > *0x138000b4 == 0x0059f9ff; then setenv board tm2; else setenv board > unknown; fi; echo Detected $board board\0" \ > + "loadkernel=part start mmc 0 > 9 kernel_sect; part size mmc 0 9 kernel_size; mmc read 0x30000000 > $kernel_sect $kernel_size\0" \ > + "muicsetusb=i2c dev 0; i2c > mw 25 c 9; i2c mw 25 d 3b; i2c mw 25 e 05; i2c mw 25 16 10\0" \ > + "displayimg=unzip 200d0000 > 67000000; mw.l 138000b4 0059f9ff; mw.l 138001a0 67e10000; mw.l > 13800200 00001680; mw.l 13801410 1; mw.l 13802040 e0000018; sleep 1; > mw.l 13802040 e0000008\0" \ > + "download=echo Thor mode > enabled; run muicsetusb; run displayimg; mw.l 0x105c080c 0; thor 0 > mmc 0\0" + +#define CONFIG_ENV_SIZE 0x1000 This can be also specified in Kconfig. > + > +#endif /* __SAMSUNG_TM2_H */ To sum up - It seems like those patches are mostly from 2016. Since then many CONFIG_* options were moved to Kconfig. Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d36447d18d..f8c671589a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -25,6 +25,9 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5800-peach-pi.dtb \ exynos5422-odroidxu3.dtb dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb + +dtb-$(CONFIG_TARGET_TM2) += exynos5433-tm2.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3036-sdk.dtb \ rk3128-evb.dtb \ diff --git a/arch/arm/dts/exynos5433-tm2.dts b/arch/arm/dts/exynos5433-tm2.dts new file mode 100644 index 0000000000..c9b178efdc --- /dev/null +++ b/arch/arm/dts/exynos5433-tm2.dts @@ -0,0 +1,37 @@ +/* + * TM2 device tree source + * + * Copyright (c) 2018 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "exynos5433.dtsi" + +/ { + model = "TM2 based on EXYNOS5433"; + compatible = "samsung,tm2", "samsung,exynos5433"; + + aliases { + serial0 = &serial_1; + console = &serial_1; + i2c0 = &i2c; + }; + + i2c: i2c { + compatible = "i2c-gpio"; + gpios = <&gpb0 0 0>, /* sda */ + <&gpb0 1 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + }; +}; + +&mmc_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 4a49c8dcc2..cf3bed57f3 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -137,6 +137,19 @@ config TARGET_PEACH_PIT endchoice endif +if ARCH_EXYNOS5433 + +choice + prompt "EXYNOS5433 board select" + +config TARGET_TM2 + bool "TM2 board" + select ARM64 + select OF_CONTROL + +endchoice +endif + if ARCH_EXYNOS7 choice @@ -168,6 +181,7 @@ source "board/samsung/odroid/Kconfig" source "board/samsung/arndale/Kconfig" source "board/samsung/smdk5250/Kconfig" source "board/samsung/smdk5420/Kconfig" +source "board/samsung/tm2/Kconfig" source "board/samsung/espresso7420/Kconfig" config SPL_LDSCRIPT diff --git a/board/samsung/tm2/Kconfig b/board/samsung/tm2/Kconfig new file mode 100644 index 0000000000..745faf6a95 --- /dev/null +++ b/board/samsung/tm2/Kconfig @@ -0,0 +1,14 @@ +if TARGET_TM2 + +config SYS_BOARD + default "tm2" + help + TM2 is Exynos5433 SoC based board, Tizen reference board. + +config SYS_VENDOR + default "samsung" + +config SYS_CONFIG_NAME + default "tm2" + +endif diff --git a/board/samsung/tm2/Makefile b/board/samsung/tm2/Makefile new file mode 100644 index 0000000000..53621774dd --- /dev/null +++ b/board/samsung/tm2/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (c) 2016 Samsung Electronics Co., Ltd. All rights reserved. +# Lukasz Majewski <l.majewski@samsung.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := tm2.o diff --git a/board/samsung/tm2/tm2.c b/board/samsung/tm2/tm2.c new file mode 100644 index 0000000000..31ec8f5641 --- /dev/null +++ b/board/samsung/tm2/tm2.c @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2018 Samsung + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <malloc.h> +#include <dwc3-uboot.h> +#include <asm/armv8/mmu.h> +#include <asm/arch/dwmmc.h> +#include <usb.h> +#include <dwc3-uboot.h> +#include <asm/arch/cpu.h> +#include <asm/arch/power.h> +#include <asm/gpio.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + /* start Multi Core Timer to get ARM Architected Timers working */ + writel(1 << 8, 0x101c0240); + return 0; +} + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} + +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + return 0; +} + +unsigned long get_uart_clk(int id) +{ + return 200000000; +} + +unsigned long get_mmc_clk(int id) +{ + return 100000000; +} + +unsigned long set_mmc_clk(int id, int div) +{ + return 0; +} + +unsigned long get_i2c_clk(int id) +{ + return 66666667; +} + +#ifdef CONFIG_USB_DWC3 +static struct dwc3_device dwc3_device_data = { + .maximum_speed = USB_SPEED_SUPER, + .base = 0x15400000, + .dr_mode = USB_DR_MODE_PERIPHERAL, + .index = 0, +}; + +int usb_gadget_handle_interrupts(void) +{ + dwc3_uboot_handle_interrupt(0); + return 0; +} + +int board_usb_init(int index, enum usb_init_type init) +{ + void *base = (void *)0x15500000; /* Exynos5433 DRD PHY */ + + /* CMU TOP: set SCLK_USBDRD30_RATIO divider to 1 */ + writel(0x0007770b, (void *)0x10030634); + + /* CMU FSYS: set PHYCLK_USBDRD30_UDRD30_PHYCLOCK and + PHYCLK_USBDRD30_UDRD30_PIPE_PCLK muxes to 1 */ + writel(0x00000011, (void *)0x156e0208); + + /* CMU FSYS: enable MUX_SCLK_USBDRD30_USER gate and + keep other gates enabled */ + writel(0x01101001, (void *)0x156e0204); + + /* CMU: TOP: set MUX_SCLK_USBDRD30 mux source to pll */ + writel(0x00000101, (void *)0x10030234); + + /* PMU: bypass USB DEV PHY isolation */ + writel(0x00000001, (void *)0x105c0704); + + /* copied from Linux kernel register dump */ + writel(0x0, base + 0x14); + writel(0x0, base + 0x34); + writel(0x8000040, base + 0x4); + writel(0x24d466e4, base + 0x1c); + writel(0x4, base + 0x30); + writel(0x24d466e4, base + 0x1c); + writel(0x3fff81c, base + 0x20); + writel(0x40, base + 0x8); + writel(0x0, base + 0x28); + writel(0xc41805bf, base + 0x10); + udelay(10); + writel(0xc41805bd, base + 0x10); + writel(0x3fff81c, base + 0x20); + writel(0x0, base + 0x28); + writel(0xc41b40bf, base + 0x10); + udelay(10); + writel(0xc41b40bd, base + 0x10); + + return dwc3_uboot_init(&dwc3_device_data); +} +#endif + +int checkboard(void) +{ + const char *board_info; + + board_info = fdt_getprop(gd->fdt_blob, 0, "model", NULL); + printf("Board: %s\n", board_info ? board_info : "unknown"); + + return 0; +} diff --git a/configs/tm2_defconfig b/configs/tm2_defconfig new file mode 100644 index 0000000000..4080366c97 --- /dev/null +++ b/configs/tm2_defconfig @@ -0,0 +1,52 @@ +CONFIG_ARM=y +# CONFIG_ARM64_SUPPORT_AARCH32 is not set +CONFIG_ARCH_EXYNOS=y +CONFIG_SYS_TEXT_BASE=0x20080000 +CONFIG_ARCH_EXYNOS5433=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_IDENT_STRING="\nSamsung Exynos5433 TM2" +CONFIG_FIT=y +CONFIG_BOOTDELAY=-2 +CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_GO is not set +CONFIG_CMD_THOR_DOWNLOAD=y +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_DM is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +# CONFIG_RANDOM_UUID is not set +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +CONFIG_CMD_FS_GENERIC=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5433-tm2" +# CONFIG_DM_DEVICE_REMOVE is not set +CONFIG_DFU_MMC=y +CONFIG_DM_I2C_GPIO=y +CONFIG_DM_MMC=y +CONFIG_MMC_DW=y +CONFIG_USB=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x04e8 +CONFIG_USB_GADGET_PRODUCT_NUM=0x685D +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_MASS_STORAGE=y +CONFIG_USB_FUNCTION_THOR=y +# CONFIG_SYS_WHITE_ON_BLACK is not set +# CONFIG_EFI_LOADER is not set diff --git a/include/configs/tm2.h b/include/configs/tm2.h new file mode 100644 index 0000000000..ce656b494a --- /dev/null +++ b/include/configs/tm2.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Samsung Electronics + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * Configuation settings for the Exynos5433 TM2 board. + */ + +#ifndef __SAMSUNG_TM2_H +#define __SAMSUNG_TM2_H + +#include <asm/arch/cpu.h> +#include <linux/sizes.h> + +/* High Level Configuration Options */ +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ +#define CONFIG_EXYNOS5433 /* Exynos5433 Family */ +#define CONFIG_S5P + +/* Timer input clock frequency */ +#define COUNTER_FREQUENCY 24000000 + +/* SD/MMC configuration */ +#define CONFIG_BOUNCE_BUFFER + +/* THOR */ +#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM +#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D + +/* required to avoid build break */ +#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM +#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 + +#define PHYS_SDRAM_1 0x20000000 +#define PHYS_SDRAM_1_SIZE 0xbf700000 + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (80 << 20) +#define CONFIG_SYS_BOOTM_LEN (130 << 20) + +/* Initial environment variables */ +#define CONFIG_BOOTCOMMAND "run modedetect" +#define CONFIG_EXTRA_ENV_SETTINGS "dfu_alt_info=kernel part 0 9 offset 0x400;rootfs part 0 18;system-data part 0 19;user part 0 21\0" \ + "modedetect=if gpio input gpa21 || itest.l *0x105c080c == 0x12345671; then run download; else run bootkernel; fi; reset\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "bootargs=console=ttySAC1,115200 earlycon=exynos4210,0x14C20000 ess_setup=0x26000000 loglevel=7 root=/dev/mmcblk0p18 rootfstype=ext4 rootwait\0" \ + "bootkernel=echo Booting kernel; run boarddetect; run loadkernel; bootm 0x30080000#$board\0" \ + "boarddetect=if itest.l *0x138000b4 == 0x0063f9ff; then setenv board tm2e; elif itest.l *0x138000b4 == 0x0059f9ff; then setenv board tm2; else setenv board unknown; fi; echo Detected $board board\0" \ + "loadkernel=part start mmc 0 9 kernel_sect; part size mmc 0 9 kernel_size; mmc read 0x30000000 $kernel_sect $kernel_size\0" \ + "muicsetusb=i2c dev 0; i2c mw 25 c 9; i2c mw 25 d 3b; i2c mw 25 e 05; i2c mw 25 16 10\0" \ + "displayimg=unzip 200d0000 67000000; mw.l 138000b4 0059f9ff; mw.l 138001a0 67e10000; mw.l 13800200 00001680; mw.l 13801410 1; mw.l 13802040 e0000018; sleep 1; mw.l 13802040 e0000008\0" \ + "download=echo Thor mode enabled; run muicsetusb; run displayimg; mw.l 0x105c080c 0; thor 0 mmc 0\0" + +#define CONFIG_ENV_SIZE 0x1000 + +#endif /* __SAMSUNG_TM2_H */
This patch adds support for Exynos5433 based TM2 and TM2e boards. u-boot is used to load and decompress kernel image or alternatively (when 'volume down' button is pressed during boot) provide THOR download USB feature for flashing kernel and rootfs images. Based on earlier work done by Lukasz Majewski <l.majewski@samsung.com>. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- arch/arm/dts/Makefile | 3 + arch/arm/dts/exynos5433-tm2.dts | 37 ++++++++++ arch/arm/mach-exynos/Kconfig | 14 ++++ board/samsung/tm2/Kconfig | 14 ++++ board/samsung/tm2/Makefile | 8 ++ board/samsung/tm2/tm2.c | 127 ++++++++++++++++++++++++++++++++ configs/tm2_defconfig | 52 +++++++++++++ include/configs/tm2.h | 60 +++++++++++++++ 8 files changed, 315 insertions(+) create mode 100644 arch/arm/dts/exynos5433-tm2.dts create mode 100644 board/samsung/tm2/Kconfig create mode 100644 board/samsung/tm2/Makefile create mode 100644 board/samsung/tm2/tm2.c create mode 100644 configs/tm2_defconfig create mode 100644 include/configs/tm2.h