@@ -8,13 +8,11 @@
#include <common.h>
#include <command.h>
+#include <dm.h>
+#include <errno.h>
#include <rtc.h>
-
-#if defined(CONFIG_CMD_DATE)
-
-#ifndef CONFIG_SYS_RTC_PL031_BASE
-#error CONFIG_SYS_RTC_PL031_BASE is not defined!
-#endif
+#include <asm/io.h>
+#include <asm/types.h>
/*
* Register definitions
@@ -30,78 +28,114 @@
#define RTC_CR_START (1 << 0)
-#define RTC_WRITE_REG(addr, val) \
- (*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)) = (val))
-#define RTC_READ_REG(addr) \
- (*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)))
+struct pl031_platdata {
+ phys_addr_t base;
+};
-static int pl031_initted = 0;
+static inline u32 pl031_read_reg(struct udevice *dev, int reg)
+{
+ struct pl031_platdata *pdata = dev_get_platdata(dev);
-/* Enable RTC Start in Control register*/
-void rtc_init(void)
+ return readl(pdata->base + reg);
+}
+
+static inline u32 pl031_write_reg(struct udevice *dev, int reg, u32 value)
{
- RTC_WRITE_REG(RTC_CR, RTC_CR_START);
+ struct pl031_platdata *pdata = dev_get_platdata(dev);
- pl031_initted = 1;
+ return writel(value, pdata->base + reg);
}
/*
- * Reset the RTC. We set the date back to 1970-01-01.
+ * Probe RTC device
+ */
+static int pl031_probe(struct udevice *dev)
+{
+ /* Enable RTC Start in Control register*/
+ pl031_write_reg(dev, RTC_CR, RTC_CR_START);
+
+ return 0;
+}
+
+/*
+ * Get the current time from the RTC
*/
-void rtc_reset(void)
+static int pl031_get(struct udevice *dev, struct rtc_time *tm)
{
- RTC_WRITE_REG(RTC_LR, 0x00);
- if(!pl031_initted)
- rtc_init();
+ unsigned long tim;
+
+ if (!tm)
+ return -EINVAL;
+
+ tim = pl031_read_reg(dev, RTC_DR);
+
+ rtc_to_tm(tim, tm);
+
+ debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ return 0;
}
/*
* Set the RTC
-*/
-int rtc_set(struct rtc_time *tmp)
+ */
+static int pl031_set(struct udevice *dev, const struct rtc_time *tm)
{
unsigned long tim;
- if(!pl031_initted)
- rtc_init();
+ if (!tm)
+ return -EINVAL;
- if (tmp == NULL) {
- puts("Error setting the date/time\n");
- return -1;
- }
+ debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
/* Calculate number of seconds this incoming time represents */
- tim = rtc_mktime(tmp);
+ tim = rtc_mktime(tm);
- RTC_WRITE_REG(RTC_LR, tim);
+ pl031_write_reg(dev, RTC_LR, tim);
- return -1;
+ return 0;
}
/*
- * Get the current time from the RTC
+ * Reset the RTC. We set the date back to 1970-01-01.
*/
-int rtc_get(struct rtc_time *tmp)
+static int pl031_reset(struct udevice *dev)
{
- ulong tim;
+ pl031_write_reg(dev, RTC_LR, 0);
- if(!pl031_initted)
- rtc_init();
+ return 0;
+}
- if (tmp == NULL) {
- puts("Error getting the date/time\n");
- return -1;
- }
+static const struct rtc_ops pl031_ops = {
+ .get = pl031_get,
+ .set = pl031_set,
+ .reset = pl031_reset,
+};
- tim = RTC_READ_REG(RTC_DR);
+static const struct udevice_id pl031_ids[] = {
+ { .compatible = "arm,pl031" },
+ { }
+};
- rtc_to_tm(tim, tmp);
+static int pl031_ofdata_to_platdata(struct udevice *dev)
+{
+ struct pl031_platdata *pdata = dev_get_platdata(dev);
- debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+ pdata->base = dev_read_addr(dev);
return 0;
}
-#endif
+U_BOOT_DRIVER(rtc_pl031) = {
+ .name = "rtc-pl031",
+ .id = UCLASS_RTC,
+ .of_match = pl031_ids,
+ .probe = pl031_probe,
+ .ofdata_to_platdata = pl031_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct pl031_platdata),
+ .ops = &pl031_ops,
+};
@@ -23,9 +23,6 @@
/* For block devices, QEMU emulates an ICH9 AHCI controller over PCI */
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 6
-/* QEMU emulates the ARM AMBA PL031 RTC */
-#define CONFIG_SYS_RTC_PL031_BASE 0x09010000
-
/* Environment options */
#define CONFIG_ENV_SIZE SZ_64K
@@ -4070,7 +4070,6 @@ CONFIG_SYS_RSTC_RMR_VAL
CONFIG_SYS_RTC_BUS_NUM
CONFIG_SYS_RTC_CNT
CONFIG_SYS_RTC_OSCILLATOR
-CONFIG_SYS_RTC_PL031_BASE
CONFIG_SYS_RTC_REG_BASE_ADDR
CONFIG_SYS_RTC_SETUP
CONFIG_SYS_RV3029_TCR