From patchwork Fri Jul 10 08:38:25 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sagar Shrikant Kadam X-Patchwork-Id: 241244 List-Id: U-Boot discussion From: sagar.kadam at sifive.com (Sagar Shrikant Kadam) Date: Fri, 10 Jul 2020 01:38:25 -0700 Subject: [PATCH v3 2/5] fu540: prci: use common reset indexes defined in binding header In-Reply-To: <1594370308-30957-1-git-send-email-sagar.kadam@sifive.com> References: <1594370308-30957-1-git-send-email-sagar.kadam@sifive.com> Message-ID: <1594370308-30957-3-git-send-email-sagar.kadam@sifive.com> Indexes of reset signals available in PRCI driver are also defined in include/dt-bindings/reset/sifive-fu540-prci.h. So use those instead of defining new ones again within the fu540-prci driver. Signed-off-by: Sagar Shrikant Kadam Reviewed-by: Bin Meng --- drivers/clk/sifive/fu540-prci.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c index fe6e0d4..00c31fc 100644 --- a/drivers/clk/sifive/fu540-prci.c +++ b/drivers/clk/sifive/fu540-prci.c @@ -41,6 +41,7 @@ #include #include #include +#include /* * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects: @@ -131,21 +132,17 @@ /* DEVICESRESETREG */ #define PRCI_DEVICESRESETREG_OFFSET 0x28 -#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0 + #define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK \ - (0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT) -#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1 + (0x1 << PRCI_RST_DDR_CTRL_N) #define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK \ - (0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT) -#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2 + (0x1 << PRCI_RST_DDR_AXI_N) #define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK \ - (0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT) -#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3 + (0x1 << PRCI_RST_DDR_AHB_N) #define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK \ - (0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT) -#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5 + (0x1 << PRCI_RST_DDR_PHY_N) #define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK \ - (0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT) + (0x1 << PRCI_RST_GEMGXL_N) /* CLKMUXSTATUSREG */ #define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c