@@ -19,6 +19,13 @@
io_drv_ctrl = <0xf432004c>;
};
+ eth: ethnet at 0xf4300000 {
+ compatible = "eth_cortina";
+ reg = <0x0 0xf4320000 0x34>,
+ <0x0 0xf43290d8 0x04>,
+ <0x0 0xf4304000 0x04>;
+ };
+
gpio0: gpio-controller at 0xf4329280 {
compatible = "cortina,ca-gpio";
reg = <0x0 0xf4329280 0x24>;
@@ -103,6 +103,27 @@ int board_init(void)
return 0;
}
+#ifndef CONFIG_DM_ETH
+/*
+ * Board specific ethernet initialization routine.
+ */
+int ca77xx_eth_initialize(bd_t *bis);
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+ unsigned int reg_data;
+
+ ca77xx_eth_initialize(bis);
+
+ // Power down GMAC4 TX/RX clock for EMI issue
+ reg_data = readl(0xf4304684);
+ reg_data |= (3 << 11);
+ writel(reg_data, 0xf4304684);
+
+ return rc;
+}
+#endif
+
int dram_init(void)
{
unsigned int ddr_size;
@@ -21,12 +21,14 @@ CONFIG_CMD_EXT4=y
CONFIG_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
-# CONFIG_NET is not set
CONFIG_DM=y
CONFIG_CORTINA_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_CORTINA=y
+CONFIG_PHYLIB=y
+CONFIG_DM_ETH=y
+CONFIG_CORTINA_NI_ENET=y
CONFIG_DM_SERIAL=y
CONFIG_CORTINA_UART=y
CONFIG_WDT=y
Add CAxxxx Ethernet support for the Cortina Access Presidio Engineering Board Signed-off-by: Alex Nemirovsky <alex.nemirovsky at cortina-access.com> Cc: Joe Hershberger <joe.hershberger at ni.com> Cc: Tom Rini <trini at konsulko.com> --- arch/arm/dts/ca-presidio-engboard.dts | 7 +++++++ board/cortina/presidio-asic/presidio.c | 21 +++++++++++++++++++++ configs/cortina_presidio-asic-emmc_defconfig | 4 +++- 3 files changed, 31 insertions(+), 1 deletion(-)