From patchwork Mon Apr 20 03:21:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?Q2h1bmZlbmcgWXVuICjkupHmmKXls7Ap?= X-Patchwork-Id: 238052 List-Id: U-Boot discussion From: chunfeng.yun at mediatek.com (Chunfeng Yun) Date: Mon, 20 Apr 2020 11:21:16 +0800 Subject: [PATCH v6 07/14] phy: phy-mtk-tphy: add support USB phys In-Reply-To: <1587352883-8641-1-git-send-email-chunfeng.yun@mediatek.com> References: <1587352883-8641-1-git-send-email-chunfeng.yun@mediatek.com> Message-ID: <1587352883-8641-8-git-send-email-chunfeng.yun@mediatek.com> Support USB2 and USB3 PHY with shared banks when support multi-phys Signed-off-by: Chunfeng Yun Reviewed-by: Weijie Gao --- v6: add Reviewed-by Weijie v3~v5: no changes v2: get the count of phys by dev_get_child_count() --- drivers/phy/phy-mtk-tphy.c | 227 +++++++++++++++++++++++++++++++++++-- 1 file changed, 218 insertions(+), 9 deletions(-) diff --git a/drivers/phy/phy-mtk-tphy.c b/drivers/phy/phy-mtk-tphy.c index bd089b7a43..71bc706c6e 100644 --- a/drivers/phy/phy-mtk-tphy.c +++ b/drivers/phy/phy-mtk-tphy.c @@ -20,11 +20,66 @@ /* version V1 sub-banks offset base address */ /* banks shared by multiple phys */ #define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */ +#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */ #define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */ +/* u2 phy bank */ +#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000 /* u3/pcie/sata phy banks */ #define SSUSB_SIFSLV_V1_U3PHYD 0x000 #define SSUSB_SIFSLV_V1_U3PHYA 0x200 +#define U3P_USBPHYACR0 0x000 +#define PA0_RG_U2PLL_FORCE_ON BIT(15) +#define PA0_RG_USB20_INTR_EN BIT(5) + +#define U3P_USBPHYACR5 0x014 +#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15) +#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12) +#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) +#define PA5_RG_U2_HS_100U_U3_EN BIT(11) + +#define U3P_USBPHYACR6 0x018 +#define PA6_RG_U2_BC11_SW_EN BIT(23) +#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20) +#define PA6_RG_U2_SQTH GENMASK(3, 0) +#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x)) + +#define U3P_U2PHYACR4 0x020 +#define P2C_RG_USB20_GPIO_CTL BIT(9) +#define P2C_USB20_GPIO_MODE BIT(8) +#define P2C_U2_GPIO_CTR_MSK \ + (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE) + +#define U3P_U2PHYDTM0 0x068 +#define P2C_FORCE_UART_EN BIT(26) +#define P2C_FORCE_DATAIN BIT(23) +#define P2C_FORCE_DM_PULLDOWN BIT(21) +#define P2C_FORCE_DP_PULLDOWN BIT(20) +#define P2C_FORCE_XCVRSEL BIT(19) +#define P2C_FORCE_SUSPENDM BIT(18) +#define P2C_FORCE_TERMSEL BIT(17) +#define P2C_RG_DATAIN GENMASK(13, 10) +#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10) +#define P2C_RG_DMPULLDOWN BIT(7) +#define P2C_RG_DPPULLDOWN BIT(6) +#define P2C_RG_XCVRSEL GENMASK(5, 4) +#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4) +#define P2C_RG_SUSPENDM BIT(3) +#define P2C_RG_TERMSEL BIT(2) +#define P2C_DTM0_PART_MASK \ + (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \ + P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \ + P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \ + P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL) + +#define U3P_U2PHYDTM1 0x06C +#define P2C_RG_UART_EN BIT(16) +#define P2C_FORCE_IDDIG BIT(9) +#define P2C_RG_VBUSVALID BIT(5) +#define P2C_RG_SESSEND BIT(4) +#define P2C_RG_AVALID BIT(2) +#define P2C_RG_IDDIG BIT(1) + #define U3P_U3_CHIP_GPIO_CTLD 0x0c #define P3C_REG_IP_SW_RST BIT(31) #define P3C_MCU_BUS_CK_GATE_EN BIT(30) @@ -42,6 +97,14 @@ #define P3A_RG_CLKDRV_AMP GENMASK(31, 29) #define P3A_RG_CLKDRV_AMP_VAL(x) ((0x7 & (x)) << 29) +#define U3P_U3_PHYA_REG6 0x018 +#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28) +#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28) + +#define U3P_U3_PHYA_REG9 0x024 +#define P3A_RG_RX_DAC_MUX GENMASK(5, 1) +#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1) + #define U3P_U3_PHYA_DA_REG0 0x100 #define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16) #define P3A_RG_XTAL_EXT_PE2H_VAL(x) ((0x3 & (x)) << 16) @@ -77,6 +140,16 @@ #define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0) #define P3A_RG_PLL_DELTA_PE2H_VAL(x) (0xffff & (x)) +#define U3P_U3_PHYD_LFPS1 0x00c +#define P3D_RG_FWAKE_TH GENMASK(21, 16) +#define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16) + +#define U3P_U3_PHYD_CDR1 0x05c +#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) +#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24) +#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8) +#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8) + #define U3P_U3_PHYD_RXDET1 0x128 #define P3D_RG_RXDET_STB2_SET GENMASK(17, 9) #define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9) @@ -85,6 +158,16 @@ #define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0) #define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x)) +#define U3P_SPLLC_XTALCTL3 0x018 +#define XC3_RG_U3_XTAL_RX_PWD BIT(9) +#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8) + +struct u2phy_banks { + void __iomem *misc; + void __iomem *fmreg; + void __iomem *com; +}; + struct u3phy_banks { void __iomem *spllc; void __iomem *chip; @@ -95,21 +178,127 @@ struct u3phy_banks { struct mtk_phy_instance { void __iomem *port_base; const struct device_node *np; - - struct u3phy_banks u3_banks; + union { + struct u2phy_banks u2_banks; + struct u3phy_banks u3_banks; + }; /* reference clock of anolog phy */ struct clk ref_clk; u32 index; - u8 type; + u32 type; }; struct mtk_tphy { + struct udevice *dev; void __iomem *sif_base; struct mtk_phy_instance **phys; int nphys; }; +static void u2_phy_instance_init(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + + /* switch to USB function, and enable usb pll */ + clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM0, + P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM, + P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0)); + + clrbits_le32(u2_banks->com + U3P_U2PHYDTM1, P2C_RG_UART_EN); + setbits_le32(u2_banks->com + U3P_USBPHYACR0, PA0_RG_USB20_INTR_EN); + + /* disable switch 100uA current to SSUSB */ + clrbits_le32(u2_banks->com + U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN); + + clrbits_le32(u2_banks->com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK); + + /* DP/DM BC1.1 path Disable */ + clrsetbits_le32(u2_banks->com + U3P_USBPHYACR6, + PA6_RG_U2_BC11_SW_EN | PA6_RG_U2_SQTH, + PA6_RG_U2_SQTH_VAL(2)); + + /* set HS slew rate */ + clrsetbits_le32(u2_banks->com + U3P_USBPHYACR5, + PA5_RG_U2_HSTX_SRCTRL, PA5_RG_U2_HSTX_SRCTRL_VAL(4)); + + dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); +} + +static void u2_phy_instance_power_on(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + + clrbits_le32(u2_banks->com + U3P_U2PHYDTM0, + P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK); + + /* OTG Enable */ + setbits_le32(u2_banks->com + U3P_USBPHYACR6, + PA6_RG_U2_OTG_VBUSCMP_EN); + + clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM1, + P2C_RG_SESSEND, P2C_RG_VBUSVALID | P2C_RG_AVALID); + + dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); +} + +static void u2_phy_instance_power_off(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + + clrbits_le32(u2_banks->com + U3P_U2PHYDTM0, + P2C_RG_XCVRSEL | P2C_RG_DATAIN); + + /* OTG Disable */ + clrbits_le32(u2_banks->com + U3P_USBPHYACR6, + PA6_RG_U2_OTG_VBUSCMP_EN); + + clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM1, + P2C_RG_VBUSVALID | P2C_RG_AVALID, P2C_RG_SESSEND); + + dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); +} + +static void u3_phy_instance_init(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u3phy_banks *u3_banks = &instance->u3_banks; + + /* gating PCIe Analog XTAL clock */ + setbits_le32(u3_banks->spllc + U3P_SPLLC_XTALCTL3, + XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD); + + /* gating XSQ */ + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG0, + P3A_RG_XTAL_EXT_EN_U3, P3A_RG_XTAL_EXT_EN_U3_VAL(2)); + + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG9, + P3A_RG_RX_DAC_MUX, P3A_RG_RX_DAC_MUX_VAL(4)); + + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG6, + P3A_RG_TX_EIDLE_CM, P3A_RG_TX_EIDLE_CM_VAL(0xe)); + + clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_CDR1, + P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1, + P3D_RG_CDR_BIR_LTD0_VAL(0xc) | + P3D_RG_CDR_BIR_LTD1_VAL(0x3)); + + clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_LFPS1, + P3D_RG_FWAKE_TH, P3D_RG_FWAKE_TH_VAL(0x34)); + + clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET1, + P3D_RG_RXDET_STB2_SET, P3D_RG_RXDET_STB2_SET_VAL(0x10)); + + clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET2, + P3D_RG_RXDET_STB2_SET_P3, + P3D_RG_RXDET_STB2_SET_P3_VAL(0x10)); + + dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); +} + static void pcie_phy_instance_init(struct mtk_tphy *tphy, struct mtk_phy_instance *instance) { @@ -187,9 +376,16 @@ static void pcie_phy_instance_power_off(struct mtk_tphy *tphy, static void phy_v1_banks_init(struct mtk_tphy *tphy, struct mtk_phy_instance *instance) { + struct u2phy_banks *u2_banks = &instance->u2_banks; struct u3phy_banks *u3_banks = &instance->u3_banks; switch (instance->type) { + case PHY_TYPE_USB2: + u2_banks->misc = NULL; + u2_banks->fmreg = tphy->sif_base + SSUSB_SIFSLV_V1_U2FREQ; + u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM; + break; + case PHY_TYPE_USB3: case PHY_TYPE_PCIE: u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC; u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP; @@ -197,6 +393,7 @@ static void phy_v1_banks_init(struct mtk_tphy *tphy, u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA; break; default: + dev_err(tphy->dev, "incompatible PHY type\n"); return; } } @@ -212,10 +409,17 @@ static int mtk_phy_init(struct phy *phy) return ret; switch (instance->type) { + case PHY_TYPE_USB2: + u2_phy_instance_init(tphy, instance); + break; + case PHY_TYPE_USB3: + u3_phy_instance_init(tphy, instance); + break; case PHY_TYPE_PCIE: pcie_phy_instance_init(tphy, instance); break; default: + dev_err(tphy->dev, "incompatible PHY type\n"); return -EINVAL; } @@ -227,7 +431,10 @@ static int mtk_phy_power_on(struct phy *phy) struct mtk_tphy *tphy = dev_get_priv(phy->dev); struct mtk_phy_instance *instance = tphy->phys[phy->id]; - pcie_phy_instance_power_on(tphy, instance); + if (instance->type == PHY_TYPE_USB2) + u2_phy_instance_power_on(tphy, instance); + else if (instance->type == PHY_TYPE_PCIE) + pcie_phy_instance_power_on(tphy, instance); return 0; } @@ -237,7 +444,10 @@ static int mtk_phy_power_off(struct phy *phy) struct mtk_tphy *tphy = dev_get_priv(phy->dev); struct mtk_phy_instance *instance = tphy->phys[phy->id]; - pcie_phy_instance_power_off(tphy, instance); + if (instance->type == PHY_TYPE_USB2) + u2_phy_instance_power_off(tphy, instance); + else if (instance->type == PHY_TYPE_PCIE) + pcie_phy_instance_power_off(tphy, instance); return 0; } @@ -285,8 +495,7 @@ static int mtk_phy_xlate(struct phy *phy, instance->type = args->args[1]; if (!(instance->type == PHY_TYPE_USB2 || instance->type == PHY_TYPE_USB3 || - instance->type == PHY_TYPE_PCIE || - instance->type == PHY_TYPE_SATA)) { + instance->type == PHY_TYPE_PCIE)) { dev_err(phy->dev, "unsupported device type\n"); return -EINVAL; } @@ -310,14 +519,14 @@ static int mtk_tphy_probe(struct udevice *dev) ofnode subnode; int index = 0; - dev_for_each_subnode(subnode, dev) - tphy->nphys++; + tphy->nphys = dev_get_child_count(dev); tphy->phys = devm_kcalloc(dev, tphy->nphys, sizeof(*tphy->phys), GFP_KERNEL); if (!tphy->phys) return -ENOMEM; + tphy->dev = dev; tphy->sif_base = dev_read_addr_ptr(dev); if (!tphy->sif_base) return -ENOENT;