From patchwork Thu Mar 19 01:52:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alex Nemirovsky X-Patchwork-Id: 243890 List-Id: U-Boot discussion From: alex.nemirovsky at cortina-access.com (Alex Nemirovsky) Date: Wed, 18 Mar 2020 18:52:16 -0700 Subject: [PATCH v2 6/8] board: presidio: add LED support In-Reply-To: <1584582738-22082-1-git-send-email-alex.nemirovsky@cortina-access.com> References: <1584582738-22082-1-git-send-email-alex.nemirovsky@cortina-access.com> Message-ID: <1584582738-22082-7-git-send-email-alex.nemirovsky@cortina-access.com> From: Jway Lin Add LED support for Cortina Access Presidio Engineering Board Signed-off-by: Jway Lin Signed-off-by: Alex Nemirovsky --- Changes in v3: None Changes in v2: None arch/arm/dts/ca-presidio-engboard.dts | 31 ++++++++++++++++++++++++++++ configs/cortina_presidio-asic-emmc_defconfig | 2 ++ 2 files changed, 33 insertions(+) diff --git a/arch/arm/dts/ca-presidio-engboard.dts b/arch/arm/dts/ca-presidio-engboard.dts index c03dacc..ae897e8 100644 --- a/arch/arm/dts/ca-presidio-engboard.dts +++ b/arch/arm/dts/ca-presidio-engboard.dts @@ -66,4 +66,35 @@ spi-max-frequency = <108000000>; }; }; + + leds: led-controller at f43200f0 { + compatible = "cortina,ca-leds"; + reg = <0x0 0xf43200f0 0x40>; + + cortina,blink_rate1 = <256>; + cortina,blink_rate2 = <512>; + + led at 0 { + pin = <0>; + active-low; + blink-sel =<0>; + port = <0>; + off-event = <0>; + label = "led0"; + }; + + led at 1 { + pin = <1>; + active-low; + blink-sel =<1>; + label = "led1"; + }; + + led at 2 { + pin = <2>; + active-low; + label = "led2"; + }; + + }; }; diff --git a/configs/cortina_presidio-asic-emmc_defconfig b/configs/cortina_presidio-asic-emmc_defconfig index e45e23c..3c6bd6b 100644 --- a/configs/cortina_presidio-asic-emmc_defconfig +++ b/configs/cortina_presidio-asic-emmc_defconfig @@ -27,6 +27,8 @@ CONFIG_DM=y CONFIG_CORTINA_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CA=y +CONFIG_LED=y +CONFIG_LED_CORTINA=y CONFIG_DM_MMC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_CORTINA=y