From patchwork Thu Mar 19 01:52:12 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alex Nemirovsky X-Patchwork-Id: 243886 List-Id: U-Boot discussion From: alex.nemirovsky at cortina-access.com (Alex Nemirovsky) Date: Wed, 18 Mar 2020 18:52:12 -0700 Subject: [PATCH v2 2/8] board: presidio-asic: Add eMMC board support In-Reply-To: <1584582738-22082-1-git-send-email-alex.nemirovsky@cortina-access.com> References: <1584582738-22082-1-git-send-email-alex.nemirovsky@cortina-access.com> Message-ID: <1584582738-22082-3-git-send-email-alex.nemirovsky@cortina-access.com> Add initial eMMC support for Cortina Access Presidio Engineering Board Signed-off-by: Alex Nemirovsky --- Changes in v3: None Changes in v2: None configs/cortina_presidio-asic-emmc_defconfig | 33 ++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 configs/cortina_presidio-asic-emmc_defconfig diff --git a/configs/cortina_presidio-asic-emmc_defconfig b/configs/cortina_presidio-asic-emmc_defconfig new file mode 100644 index 0000000..e10008a --- /dev/null +++ b/configs/cortina_presidio-asic-emmc_defconfig @@ -0,0 +1,33 @@ +CONFIG_ARM=y +# CONFIG_SYS_ARCH_TIMER is not set +CONFIG_TARGET_PRESIDIO_ASIC=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_DM_GPIO=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="Presidio-SoC" +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_SMC=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_CORTINA_GPIO=y +CONFIG_DM_MMC=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_CORTINA=y +CONFIG_DM_SERIAL=y +CONFIG_CORTINA_UART=y +CONFIG_WDT=y +CONFIG_WDT_CORTINA=y