From patchwork Thu Mar 12 09:43:00 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kuldeep Singh X-Patchwork-Id: 243567 List-Id: U-Boot discussion From: kuldeep.singh at nxp.com (Kuldeep Singh) Date: Thu, 12 Mar 2020 15:13:00 +0530 Subject: [PATCH] configs: lx2160a: Access flash memory as per spi-mem Message-ID: <1584006180-17430-1-git-send-email-kuldeep.singh@nxp.com> MC_INIT and BOOT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh --- include/configs/lx2160a_common.h | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 373daeb..2a76ce5 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -187,11 +187,15 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* Initial environment variables */ -#define XSPI_MC_INIT_CMD \ - "env exists secureboot && " \ - "esbc_validate 0x20640000 && " \ - "esbc_validate 0x20680000 ;" \ - "fsl_mc start mc 0x20a00000 0x20e00000\0" +#define XSPI_MC_INIT_CMD \ + "sf probe 0:0 && " \ + "sf read 0x80640000 0x640000 0x80000 && " \ + "env exists secureboot && " \ + "esbc_validate 0x80640000 && " \ + "esbc_validate 0x80680000; " \ + "sf read 0x80a00000 0xa00000 0x300000 && " \ + "sf read 0x80e00000 0xe00000 0x100000; " \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" #define SD_MC_INIT_CMD \ "mmc read 0x80a00000 0x5000 0x1200;" \ @@ -249,10 +253,13 @@ unsigned long get_board_ddr_clk(void); "source ${scriptaddr}\0" #define XSPI_NOR_BOOTCOMMAND \ - "env exists mcinitcmd && env exists secureboot "\ - "&& esbc_validate 0x206C0000; " \ + "sf probe 0:0; " \ + "sf read 0x806c0000 0x6c0000 0x40000; " \ + "env exists mcinitcmd && env exists secureboot" \ + " && esbc_validate 0x806c0000; " \ + "sf read 0x80d00000 0xd00000 0x100000; " \ "env exists mcinitcmd && " \ - "fsl_mc lazyapply dpl 0x20d00000; " \ + "fsl_mc lazyapply dpl 0x80d00000; " \ "run distro_bootcmd;run xspi_bootcmd; " \ "env exists secureboot && esbc_halt;"