From patchwork Mon Feb 3 11:32:28 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kuldeep Singh X-Patchwork-Id: 235809 List-Id: U-Boot discussion From: kuldeep.singh at nxp.com (Kuldeep Singh) Date: Mon, 3 Feb 2020 17:02:28 +0530 Subject: [PATCH 2/3] arm: dts: ls1028a: Add RX, TX buswidth in qspi to use octal mode In-Reply-To: <1580729549-1769-1-git-send-email-kuldeep.singh@nxp.com> References: <1580729549-1769-1-git-send-email-kuldeep.singh@nxp.com> Message-ID: <1580729549-1769-3-git-send-email-kuldeep.singh@nxp.com> Signed-off-by: Kuldeep Singh --- Depends on https://patchwork.ozlabs.org/project/uboot/list/?series=141023 arch/arm/dts/fsl-ls1028a-qds.dts | 2 ++ arch/arm/dts/fsl-ls1028a-rdb.dts | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/dts/fsl-ls1028a-qds.dts b/arch/arm/dts/fsl-ls1028a-qds.dts index 3fd37be..029a8e3 100644 --- a/arch/arm/dts/fsl-ls1028a-qds.dts +++ b/arch/arm/dts/fsl-ls1028a-qds.dts @@ -49,6 +49,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; }; diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts index a8f4085..85b4815 100644 --- a/arch/arm/dts/fsl-ls1028a-rdb.dts +++ b/arch/arm/dts/fsl-ls1028a-rdb.dts @@ -48,6 +48,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; };