From patchwork Sat Jan 25 12:22:47 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Amit Tomer X-Patchwork-Id: 240089 List-Id: U-Boot discussion From: amittomer25 at gmail.com (Amit Singh Tomar) Date: Sat, 25 Jan 2020 17:52:47 +0530 Subject: [PATCH v3 05/21] arm: actions: add S700 SoC device tree In-Reply-To: <1579954983-11329-1-git-send-email-amittomer25@gmail.com> References: <1579954983-11329-1-git-send-email-amittomer25@gmail.com> Message-ID: <1579954983-11329-6-git-send-email-amittomer25@gmail.com> This patch adds .dtsi file(sync with Linux 5.5) and required binding for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores. Signed-off-by: Amit Singh Tomar --- Changes since v2: * Synced DTS bindings with Linux 5.5. Changes since v1: * Moved the u-boot specific changes to s700-u-boot.dtsi, now s700.dtsi is in complete sync with Linux 4.20. --- arch/arm/dts/Makefile | 6 +- arch/arm/dts/s700.dtsi | 248 +++++++++++++++++++++++++ include/dt-bindings/clock/actions,s700-cmu.h | 118 ++++++++++++ include/dt-bindings/reset/actions,s700-reset.h | 34 ++++ 4 files changed, 404 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/s700.dtsi create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h create mode 100644 include/dt-bindings/reset/actions,s700-reset.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b48b05f..0ad14fb 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -64,8 +64,10 @@ dtb-$(CONFIG_KIRKWOOD) += \ kirkwood-pogo_e02.dtb \ kirkwood-sheevaplug.dtb -dtb-$(CONFIG_ARCH_OWL) += \ - bubblegum_96.dtb +dtb-$(CONFIG_MACH_S900) += \ + bubblegum_96.dtb +dtb-$(CONFIG_MACH_S700) += \ + s700-cubieboard7.dtb dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \ diff --git a/arch/arm/dts/s700.dtsi b/arch/arm/dts/s700.dtsi new file mode 100644 index 0000000..2006ad5 --- /dev/null +++ b/arch/arm/dts/s700.dtsi @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas Färber + */ + +#include +#include +#include + +/ { + compatible = "actions,s700"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu at 2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu at 3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon at 1f000000 { + reg = <0x0 0x1f000000 0x0 0x1000000>; + no-map; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + hosc: hosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + losc: losc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller at e00f1000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe00f1000 0x0 0x1000>, + <0x0 0xe00f2000 0x0 0x2000>, + <0x0 0xe00f4000 0x0 0x2000>, + <0x0 0xe00f6000 0x0 0x2000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + + uart0: serial at e0120000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0120000 0x0 0x2000>; + clocks = <&cmu CLK_UART0>; + interrupts = ; + status = "disabled"; + }; + + uart1: serial at e0122000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0122000 0x0 0x2000>; + clocks = <&cmu CLK_UART1>; + interrupts = ; + status = "disabled"; + }; + + uart2: serial at e0124000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0124000 0x0 0x2000>; + clocks = <&cmu CLK_UART2>; + interrupts = ; + status = "disabled"; + }; + + uart3: serial at e0126000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0126000 0x0 0x2000>; + clocks = <&cmu CLK_UART3>; + interrupts = ; + status = "disabled"; + }; + + uart4: serial at e0128000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0128000 0x0 0x2000>; + clocks = <&cmu CLK_UART4>; + interrupts = ; + status = "disabled"; + }; + + uart5: serial at e012a000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012a000 0x0 0x2000>; + clocks = <&cmu CLK_UART5>; + interrupts = ; + status = "disabled"; + }; + + uart6: serial at e012c000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012c000 0x0 0x2000>; + clocks = <&cmu CLK_UART6>; + interrupts = ; + status = "disabled"; + }; + + cmu: clock-controller at e0168000 { + compatible = "actions,s700-cmu"; + reg = <0x0 0xe0168000 0x0 0x1000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + i2c0: i2c at e0170000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe0170000 0 0x1000>; + clocks = <&cmu CLK_I2C0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c at e0174000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe0174000 0 0x1000>; + clocks = <&cmu CLK_I2C1>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c at e0178000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe0178000 0 0x1000>; + clocks = <&cmu CLK_I2C2>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c at e017c000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe017c000 0 0x1000>; + clocks = <&cmu CLK_I2C3>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sps: power-controller at e01b0100 { + compatible = "actions,s700-sps"; + reg = <0x0 0xe01b0100 0x0 0x100>; + #power-domain-cells = <1>; + }; + + timer: timer at e024c000 { + compatible = "actions,s700-timer"; + reg = <0x0 0xe024c000 0x0 0x4000>; + interrupts = ; + interrupt-names = "timer1"; + }; + + pinctrl: pinctrl at e01b0000 { + compatible = "actions,s700-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 136>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + , + , + ; + }; + }; +}; diff --git a/include/dt-bindings/clock/actions,s700-cmu.h b/include/dt-bindings/clock/actions,s700-cmu.h new file mode 100644 index 0000000..3e19429 --- /dev/null +++ b/include/dt-bindings/clock/actions,s700-cmu.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Device Tree binding constants for Actions Semi S700 Clock Management Unit + * + * Copyright (c) 2014 Actions Semi Inc. + * Author: David Liu + * + * Author: Pathiban Nallathambi + * Author: Saravanan Sekar + */ + +#ifndef __DT_BINDINGS_CLOCK_S700_H +#define __DT_BINDINGS_CLOCK_S700_H + +#define CLK_NONE 0 + +/* pll clocks */ +#define CLK_CORE_PLL 1 +#define CLK_DEV_PLL 2 +#define CLK_DDR_PLL 3 +#define CLK_NAND_PLL 4 +#define CLK_DISPLAY_PLL 5 +#define CLK_TVOUT_PLL 6 +#define CLK_CVBS_PLL 7 +#define CLK_AUDIO_PLL 8 +#define CLK_ETHERNET_PLL 9 + +/* system clock */ +#define CLK_CPU 10 +#define CLK_DEV 11 +#define CLK_AHB 12 +#define CLK_APB 13 +#define CLK_DMAC 14 +#define CLK_NOC0_CLK_MUX 15 +#define CLK_NOC1_CLK_MUX 16 +#define CLK_HP_CLK_MUX 17 +#define CLK_HP_CLK_DIV 18 +#define CLK_NOC1_CLK_DIV 19 +#define CLK_NOC0 20 +#define CLK_NOC1 21 +#define CLK_SENOR_SRC 22 + +/* peripheral device clock */ +#define CLK_GPIO 23 +#define CLK_TIMER 24 +#define CLK_DSI 25 +#define CLK_CSI 26 +#define CLK_SI 27 +#define CLK_DE 28 +#define CLK_HDE 29 +#define CLK_VDE 30 +#define CLK_VCE 31 +#define CLK_NAND 32 +#define CLK_SD0 33 +#define CLK_SD1 34 +#define CLK_SD2 35 + +#define CLK_UART0 36 +#define CLK_UART1 37 +#define CLK_UART2 38 +#define CLK_UART3 39 +#define CLK_UART4 40 +#define CLK_UART5 41 +#define CLK_UART6 42 + +#define CLK_PWM0 43 +#define CLK_PWM1 44 +#define CLK_PWM2 45 +#define CLK_PWM3 46 +#define CLK_PWM4 47 +#define CLK_PWM5 48 +#define CLK_GPU3D 49 + +#define CLK_I2C0 50 +#define CLK_I2C1 51 +#define CLK_I2C2 52 +#define CLK_I2C3 53 + +#define CLK_SPI0 54 +#define CLK_SPI1 55 +#define CLK_SPI2 56 +#define CLK_SPI3 57 + +#define CLK_USB3_480MPLL0 58 +#define CLK_USB3_480MPHY0 59 +#define CLK_USB3_5GPHY 60 +#define CLK_USB3_CCE 61 +#define CLK_USB3_MAC 62 + +#define CLK_LCD 63 +#define CLK_HDMI_AUDIO 64 +#define CLK_I2SRX 65 +#define CLK_I2STX 66 + +#define CLK_SENSOR0 67 +#define CLK_SENSOR1 68 + +#define CLK_HDMI_DEV 69 + +#define CLK_ETHERNET 70 +#define CLK_RMII_REF 71 + +#define CLK_USB2H0_PLLEN 72 +#define CLK_USB2H0_PHY 73 +#define CLK_USB2H0_CCE 74 +#define CLK_USB2H1_PLLEN 75 +#define CLK_USB2H1_PHY 76 +#define CLK_USB2H1_CCE 77 + +#define CLK_TVOUT 78 + +#define CLK_THERMAL_SENSOR 79 + +#define CLK_IRC_SWITCH 80 +#define CLK_PCM1 81 +#define CLK_NR_CLKS (CLK_PCM1 + 1) + +#endif /* __DT_BINDINGS_CLOCK_S700_H */ diff --git a/include/dt-bindings/reset/actions,s700-reset.h b/include/dt-bindings/reset/actions,s700-reset.h new file mode 100644 index 0000000..5e3b16b --- /dev/null +++ b/include/dt-bindings/reset/actions,s700-reset.h @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +// +// Device Tree binding constants for Actions Semi S700 Reset Management Unit +// +// Copyright (c) 2018 Linaro Ltd. + +#ifndef __DT_BINDINGS_ACTIONS_S700_RESET_H +#define __DT_BINDINGS_ACTIONS_S700_RESET_H + +#define RESET_AUDIO 0 +#define RESET_CSI 1 +#define RESET_DE 2 +#define RESET_DSI 3 +#define RESET_GPIO 4 +#define RESET_I2C0 5 +#define RESET_I2C1 6 +#define RESET_I2C2 7 +#define RESET_I2C3 8 +#define RESET_KEY 9 +#define RESET_LCD0 10 +#define RESET_SI 11 +#define RESET_SPI0 12 +#define RESET_SPI1 13 +#define RESET_SPI2 14 +#define RESET_SPI3 15 +#define RESET_UART0 16 +#define RESET_UART1 17 +#define RESET_UART2 18 +#define RESET_UART3 19 +#define RESET_UART4 20 +#define RESET_UART5 21 +#define RESET_UART6 22 + +#endif /* __DT_BINDINGS_ACTIONS_S700_RESET_H */