@@ -64,8 +64,10 @@ dtb-$(CONFIG_KIRKWOOD) += \
kirkwood-pogo_e02.dtb \
kirkwood-sheevaplug.dtb
-dtb-$(CONFIG_ARCH_OWL) += \
- bubblegum_96.dtb
+dtb-$(CONFIG_MACH_S900) += \
+ bubblegum_96.dtb
+dtb-$(CONFIG_MACH_S700) += \
+ s700-cubieboard7.dtb
dtb-$(CONFIG_ROCKCHIP_PX30) += \
px30-evb.dtb \
new file mode 100644
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s700-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/actions,s700-reset.h>
+
+/ {
+ compatible = "actions,s700";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secmon at 1f000000 {
+ reg = <0x0 0x1f000000 0x0 0x1000000>;
+ no-map;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ hosc: hosc {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+ losc: losc {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller at e00f1000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xe00f1000 0x0 0x1000>,
+ <0x0 0xe00f2000 0x0 0x2000>,
+ <0x0 0xe00f4000 0x0 0x2000>,
+ <0x0 0xe00f6000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ uart0: serial at e0120000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0120000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART0>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart1: serial at e0122000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0122000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART1>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart2: serial at e0124000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0124000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART2>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart3: serial at e0126000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0126000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART3>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart4: serial at e0128000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0128000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART4>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart5: serial at e012a000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe012a000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART5>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart6: serial at e012c000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe012c000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART6>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ cmu: clock-controller at e0168000 {
+ compatible = "actions,s700-cmu";
+ reg = <0x0 0xe0168000 0x0 0x1000>;
+ clocks = <&hosc>, <&losc>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ i2c0: i2c at e0170000 {
+ compatible = "actions,s700-i2c";
+ reg = <0 0xe0170000 0 0x1000>;
+ clocks = <&cmu CLK_I2C0>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at e0174000 {
+ compatible = "actions,s700-i2c";
+ reg = <0 0xe0174000 0 0x1000>;
+ clocks = <&cmu CLK_I2C1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at e0178000 {
+ compatible = "actions,s700-i2c";
+ reg = <0 0xe0178000 0 0x1000>;
+ clocks = <&cmu CLK_I2C2>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at e017c000 {
+ compatible = "actions,s700-i2c";
+ reg = <0 0xe017c000 0 0x1000>;
+ clocks = <&cmu CLK_I2C3>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ sps: power-controller at e01b0100 {
+ compatible = "actions,s700-sps";
+ reg = <0x0 0xe01b0100 0x0 0x100>;
+ #power-domain-cells = <1>;
+ };
+
+ timer: timer at e024c000 {
+ compatible = "actions,s700-timer";
+ reg = <0x0 0xe024c000 0x0 0x4000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "timer1";
+ };
+
+ pinctrl: pinctrl at e01b0000 {
+ compatible = "actions,s700-pinctrl";
+ reg = <0x0 0xe01b0000 0x0 0x1000>;
+ clocks = <&cmu CLK_GPIO>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 136>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Device Tree binding constants for Actions Semi S700 Clock Management Unit
+ *
+ * Copyright (c) 2014 Actions Semi Inc.
+ * Author: David Liu <liuwei at actions-semi.com>
+ *
+ * Author: Pathiban Nallathambi <pn at denx.de>
+ * Author: Saravanan Sekar <sravanhome at gmail.com>
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_S700_H
+#define __DT_BINDINGS_CLOCK_S700_H
+
+#define CLK_NONE 0
+
+/* pll clocks */
+#define CLK_CORE_PLL 1
+#define CLK_DEV_PLL 2
+#define CLK_DDR_PLL 3
+#define CLK_NAND_PLL 4
+#define CLK_DISPLAY_PLL 5
+#define CLK_TVOUT_PLL 6
+#define CLK_CVBS_PLL 7
+#define CLK_AUDIO_PLL 8
+#define CLK_ETHERNET_PLL 9
+
+/* system clock */
+#define CLK_CPU 10
+#define CLK_DEV 11
+#define CLK_AHB 12
+#define CLK_APB 13
+#define CLK_DMAC 14
+#define CLK_NOC0_CLK_MUX 15
+#define CLK_NOC1_CLK_MUX 16
+#define CLK_HP_CLK_MUX 17
+#define CLK_HP_CLK_DIV 18
+#define CLK_NOC1_CLK_DIV 19
+#define CLK_NOC0 20
+#define CLK_NOC1 21
+#define CLK_SENOR_SRC 22
+
+/* peripheral device clock */
+#define CLK_GPIO 23
+#define CLK_TIMER 24
+#define CLK_DSI 25
+#define CLK_CSI 26
+#define CLK_SI 27
+#define CLK_DE 28
+#define CLK_HDE 29
+#define CLK_VDE 30
+#define CLK_VCE 31
+#define CLK_NAND 32
+#define CLK_SD0 33
+#define CLK_SD1 34
+#define CLK_SD2 35
+
+#define CLK_UART0 36
+#define CLK_UART1 37
+#define CLK_UART2 38
+#define CLK_UART3 39
+#define CLK_UART4 40
+#define CLK_UART5 41
+#define CLK_UART6 42
+
+#define CLK_PWM0 43
+#define CLK_PWM1 44
+#define CLK_PWM2 45
+#define CLK_PWM3 46
+#define CLK_PWM4 47
+#define CLK_PWM5 48
+#define CLK_GPU3D 49
+
+#define CLK_I2C0 50
+#define CLK_I2C1 51
+#define CLK_I2C2 52
+#define CLK_I2C3 53
+
+#define CLK_SPI0 54
+#define CLK_SPI1 55
+#define CLK_SPI2 56
+#define CLK_SPI3 57
+
+#define CLK_USB3_480MPLL0 58
+#define CLK_USB3_480MPHY0 59
+#define CLK_USB3_5GPHY 60
+#define CLK_USB3_CCE 61
+#define CLK_USB3_MAC 62
+
+#define CLK_LCD 63
+#define CLK_HDMI_AUDIO 64
+#define CLK_I2SRX 65
+#define CLK_I2STX 66
+
+#define CLK_SENSOR0 67
+#define CLK_SENSOR1 68
+
+#define CLK_HDMI_DEV 69
+
+#define CLK_ETHERNET 70
+#define CLK_RMII_REF 71
+
+#define CLK_USB2H0_PLLEN 72
+#define CLK_USB2H0_PHY 73
+#define CLK_USB2H0_CCE 74
+#define CLK_USB2H1_PLLEN 75
+#define CLK_USB2H1_PHY 76
+#define CLK_USB2H1_CCE 77
+
+#define CLK_TVOUT 78
+
+#define CLK_THERMAL_SENSOR 79
+
+#define CLK_IRC_SWITCH 80
+#define CLK_PCM1 81
+#define CLK_NR_CLKS (CLK_PCM1 + 1)
+
+#endif /* __DT_BINDINGS_CLOCK_S700_H */
new file mode 100644
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+//
+// Device Tree binding constants for Actions Semi S700 Reset Management Unit
+//
+// Copyright (c) 2018 Linaro Ltd.
+
+#ifndef __DT_BINDINGS_ACTIONS_S700_RESET_H
+#define __DT_BINDINGS_ACTIONS_S700_RESET_H
+
+#define RESET_AUDIO 0
+#define RESET_CSI 1
+#define RESET_DE 2
+#define RESET_DSI 3
+#define RESET_GPIO 4
+#define RESET_I2C0 5
+#define RESET_I2C1 6
+#define RESET_I2C2 7
+#define RESET_I2C3 8
+#define RESET_KEY 9
+#define RESET_LCD0 10
+#define RESET_SI 11
+#define RESET_SPI0 12
+#define RESET_SPI1 13
+#define RESET_SPI2 14
+#define RESET_SPI3 15
+#define RESET_UART0 16
+#define RESET_UART1 17
+#define RESET_UART2 18
+#define RESET_UART3 19
+#define RESET_UART4 20
+#define RESET_UART5 21
+#define RESET_UART6 22
+
+#endif /* __DT_BINDINGS_ACTIONS_S700_RESET_H */
This patch adds .dtsi file(sync with Linux 5.5) and required binding for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores. Signed-off-by: Amit Singh Tomar <amittomer25 at gmail.com> --- Changes since v2: * Synced DTS bindings with Linux 5.5. Changes since v1: * Moved the u-boot specific changes to s700-u-boot.dtsi, now s700.dtsi is in complete sync with Linux 4.20. --- arch/arm/dts/Makefile | 6 +- arch/arm/dts/s700.dtsi | 248 +++++++++++++++++++++++++ include/dt-bindings/clock/actions,s700-cmu.h | 118 ++++++++++++ include/dt-bindings/reset/actions,s700-reset.h | 34 ++++ 4 files changed, 404 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/s700.dtsi create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h create mode 100644 include/dt-bindings/reset/actions,s700-reset.h