@@ -8,49 +8,27 @@ config MESON64_COMMON
select DM_SERIAL
imply CMD_DM
-config MESON_GXBB
- bool
- select MESON64_COMMON
-
-config MESON_GXL
- bool
- select MESON64_COMMON
-
-config MESON_GXM
- bool
- select MESON64_COMMON
-
choice
prompt "Platform select"
- default TARGET_ODROID_C2
+ default MESON_GXBB
-config TARGET_ODROID_C2
- bool "ODROID-C2"
- select MESON_GXBB
+config MESON_GXBB
+ bool "GXBB"
+ select MESON64_COMMON
help
- ODROID-C2 is a single board computer based on Meson GXBaby
- with 2 GiB of RAM, Gigabit Ethernet, HDMI, 4 USB, micro-SD
- slot, eMMC, IR receiver and a 40-pin GPIO header.
- You should also select this TARGET if you have an nanopi-k2
+ Select this if your SoC is an S905
-config TARGET_P212
- bool "P212"
- select MESON_GXL
+config MESON_GXL
+ bool "GXL"
+ select MESON64_COMMON
help
- P212 is a reference dessign board based on Meson GXL S905X SoC
- with 2 GiB of RAM, Ethernet, HDMI, 2 USB, micro-SD slot,
- eMMC, IR receiver, CVBS+Audio jack and a SDIO WiFi module.
- You should also select this TARGET if you have Khadas Vim or
- a libretech aml-s905x-cc
+ Select this if your SoC is an S905X/D or S805X
-config TARGET_Q200
- bool "KHADAS-VIM2"
- select MESON_GXM
+config MESON_GXM
+ bool "GXM"
+ select MESON64_COMMON
help
- Q200 is a reference dessign board based on Meson GXM
- with 2/3 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot,
- eMMC, IR receiver.
- You should also select this TARGET if you have Khadas Vim2.
+ Select this if your SoC is an S912
endchoice
@@ -60,10 +38,31 @@ config SYS_SOC
config SYS_MALLOC_F_LEN
default 0x1000
-source "board/amlogic/odroid-c2/Kconfig"
+config SYS_VENDOR
+ string "Vendor name"
+ default "amlogic"
+ help
+ This option contains information about board name.
+ Based on this option board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD> will
+ be used.
-source "board/amlogic/p212/Kconfig"
+config SYS_BOARD
+ string "Board name"
+ default "odroid-c2" if MESON_GXBB
+ default "p212" if MESON_GXL
+ default "q200" if MESON_GXM
+ default ""
+ help
+ This option contains information about board name.
+ Based on this option board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD> will
+ be used.
-source "board/amlogic/q200/Kconfig"
+config SYS_CONFIG_NAME
+ string "Board configuration name"
+ default "meson64"
+ help
+ This option contains information about board configuration name.
+ Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+ will be used for board configuration.
endif
deleted file mode 100644
@@ -1,12 +0,0 @@
-if TARGET_ODROID_C2
-
-config SYS_BOARD
- default "odroid-c2"
-
-config SYS_VENDOR
- default "amlogic"
-
-config SYS_CONFIG_NAME
- default "odroid-c2"
-
-endif
deleted file mode 100644
@@ -1,12 +0,0 @@
-if TARGET_P212
-
-config SYS_BOARD
- default "p212"
-
-config SYS_VENDOR
- default "amlogic"
-
-config SYS_CONFIG_NAME
- default "p212"
-
-endif
deleted file mode 100644
@@ -1,12 +0,0 @@
-if TARGET_Q200
-
-config SYS_BOARD
- default "q200"
-
-config SYS_VENDOR
- default "amlogic"
-
-config SYS_CONFIG_NAME
- default "q200"
-
-endif
@@ -2,7 +2,6 @@ CONFIG_ARM=y
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_MESON_GXM=y
-CONFIG_TARGET_Q200=y
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" khadas-vim2"
@@ -2,7 +2,6 @@ CONFIG_ARM=y
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_MESON_GXL=y
-CONFIG_TARGET_P212=y
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" khadas-vim"
@@ -2,7 +2,6 @@ CONFIG_ARM=y
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_MESON_GXL=y
-CONFIG_TARGET_P212=y
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" libretech-cc"
@@ -1,8 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
-CONFIG_MESON_GXBB=y
-CONFIG_TARGET_ODROID_C2=y
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" nanopi-k2"
@@ -2,7 +2,6 @@ CONFIG_ARM=y
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_MESON_GXBB=y
-CONFIG_TARGET_ODROID_C2=y
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" odroid-c2"
@@ -2,7 +2,6 @@ CONFIG_ARM=y
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_MESON_GXL=y
-CONFIG_TARGET_P212=y
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" p212"
deleted file mode 100644
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration for Khadas VIM
- *
- * Copyright (C) 2017 Baylibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/meson-gx-common.h>
-
-#endif /* __CONFIG_H */
deleted file mode 100644
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration for LibreTech CC
- *
- * Copyright (C) 2017 Baylibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/meson-gx-common.h>
-
-#endif /* __CONFIG_H */
deleted file mode 100644
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration for Amlogic Meson GX SoCs
- * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
- */
-
-#ifndef __MESON_GX_COMMON_CONFIG_H
-#define __MESON_GX_COMMON_CONFIG_H
-
-#define CONFIG_CPU_ARMV8
-#define CONFIG_REMAKE_ELF
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_SYS_MAXARGS 32
-#define CONFIG_SYS_MALLOC_LEN (32 << 20)
-#define CONFIG_SYS_CBSIZE 1024
-
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_INIT_SP_ADDR 0x20000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
-
-/* Generic Interrupt Controller Definitions */
-#define GICD_BASE 0xc4301000
-#define GICC_BASE 0xc4302000
-
-#ifdef CONFIG_CMD_USB
-#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
-#else
-#define BOOT_TARGET_DEVICES_USB(func)
-#endif
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(MMC, mmc, 1) \
- func(MMC, mmc, 2) \
- BOOT_TARGET_DEVICES_USB(func) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
-
-#include <config_distro_bootcmd.h>
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "fdt_addr_r=0x01000000\0" \
- "scriptaddr=0x1f000000\0" \
- "kernel_addr_r=0x01080000\0" \
- "pxefile_addr_r=0x01080000\0" \
- "ramdisk_addr_r=0x13000000\0" \
- "fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
- BOOTENV
-
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */
-
-#endif /* __MESON_GX_COMMON_CONFIG_H */
new file mode 100644
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for Amlogic Meson 64bits SoCs
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+#ifndef __MESON64_CONFIG_H
+#define __MESON64_CONFIG_H
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE 0xc4301000
+#define GICC_BASE 0xc4302000
+
+#define CONFIG_CPU_ARMV8
+#define CONFIG_REMAKE_ELF
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MAXARGS 32
+#define CONFIG_SYS_MALLOC_LEN (32 << 20)
+#define CONFIG_SYS_CBSIZE 1024
+
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_INIT_SP_ADDR 0x20000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */
+
+#ifdef CONFIG_CMD_USB
+#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
+#else
+#define BOOT_TARGET_DEVICES_USB(func)
+#endif
+
+#ifndef BOOT_TARGET_DEVICES
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(MMC, mmc, 1) \
+ func(MMC, mmc, 2) \
+ BOOT_TARGET_DEVICES_USB(func) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+#endif
+
+#ifndef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_addr_r=0x01000000\0" \
+ "scriptaddr=0x1f000000\0" \
+ "kernel_addr_r=0x01080000\0" \
+ "pxefile_addr_r=0x01080000\0" \
+ "ramdisk_addr_r=0x13000000\0" \
+ "fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+ BOOTENV
+#endif
+
+#include <config_distro_bootcmd.h>
+
+#endif /* __MESON64_CONFIG_H */
deleted file mode 100644
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration for NANOPI-K2
- * (C) Copyright 2018 Thomas McKahan
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/meson-gx-common.h>
-
-#endif /* __CONFIG_H */
deleted file mode 100644
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration for ODROID-C2
- * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/meson-gx-common.h>
-
-#endif /* __CONFIG_H */
deleted file mode 100644
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration for Amlogic P212
- *
- * Copyright (C) 2017 Baylibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/meson-gx-common.h>
-
-#endif /* __CONFIG_H */
deleted file mode 100644
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration for Khadas VIM2
- *
- * Copyright (C) 2017 Baylibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MISC_INIT_R
-
-#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxm-khadas-vim2.dtb\0"
-
-#include <configs/meson-gx-common.h>
-
-#endif /* __CONFIG_H */