[PATCHv3,1/5] ARM64: dts: hi3798cv200-poplar: add device tree bindings

diff --git a/arch/arm/dts/hi3798cv200-poplar.dts b/arch/arm/dts/hi3798cv200-poplar.dts
new file mode 100644
index 0000000..b914287
--- /dev/null
+++ b/arch/arm/dts/hi3798cv200-poplar.dts
@@ -0,0 +1,162 @@ 
+/*
+ * DTS File for HiSilicon Poplar Development Board
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hi3798cv200.dtsi"
+
+/ {
+	model = "HiSilicon Poplar Development Board";
+	compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
+
+	aliases {
+		serial0 = &uart0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user-led0 {
+			label = "USER-LED0";
+			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		user-led1 {
+			label = "USER-LED1";
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		user-led2 {
+			label = "USER-LED2";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+
+		user-led3 {
+			label = "USER-LED3";
+			gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&eth_phy1>;
+	phy-mode = "rgmii";
+	hisilicon,phy-reset-delays-us = <10000 10000 30000>;
+
+	eth_phy1: phy@3 {
+		reg = <3>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+	gpio-line-names = "LS-GPIO-E",	"",
+			  "",		"",
+			  "",		"LS-GPIO-F",
+			  "",		"LS-GPIO-J";
+};
+
+&gpio2 {
+	status = "okay";
+	gpio-line-names = "LS-GPIO-H",	"LS-GPIO-I",
+			  "LS-GPIO-L",	"LS-GPIO-G",
+			  "LS-GPIO-K",	"",
+			  "",		"";
+};
+
+&gpio3 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "LS-GPIO-C",	"",
+			  "",		"LS-GPIO-B";
+};
+
+&gpio4 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "",		"LS-GPIO-D",
+			  "",		"";
+};
+
+&gpio5 {
+	status = "okay";
+	gpio-line-names = "",		"USER-LED-1",
+			  "USER-LED-2",	"",
+			  "",		"LS-GPIO-A",
+			  "",		"";
+};
+
+&gpio6 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"USER-LED-0",
+			  "",		"",
+			  "",		"";
+};
+
+&gpio10 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "",		"",
+			  "USER-LED-3",	"";
+};
+
+&i2c0 {
+	status = "okay";
+	label = "LS-I2C0";
+};
+
+&i2c2 {
+	status = "okay";
+	label = "LS-I2C1";
+};
+
+&ir {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	label = "LS-SPI0";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	label = "LS-UART0";
+};
+/* No optional LS-UART1 on Low Speed Expansion Connector. */
diff --git a/arch/arm/dts/hi3798cv200.dtsi b/arch/arm/dts/hi3798cv200.dtsi
new file mode 100644
index 0000000..75865f8
--- /dev/null
+++ b/arch/arm/dts/hi3798cv200.dtsi
@@ -0,0 +1,411 @@ 
+/*
+ * DTS File for HiSilicon Hi3798cv200 SoC.
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <dt-bindings/clock/histb-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+	compatible = "hisilicon,hi3798cv200";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
+		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc@f0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xf0000000 0x10000000>;
+
+		crg: clock-reset-controller@8a22000 {
+			compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
+			reg = <0x8a22000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+
+			gmacphyrst: reset-controller {
+				compatible = "ti,syscon-reset";
+				#reset-cells = <1>;
+				ti,reset-bits =
+					<0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR |
+					 DEASSERT_SET|STATUS_NONE)>,
+					<0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR |
+					 DEASSERT_SET|STATUS_NONE)>;
+			};
+		};
+
+		sysctrl: system-controller@8000000 {
+			compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
+			reg = <0x8000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+		};
+
+		uart0: serial@8b00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x8b00000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl HISTB_UART0_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@8b02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x8b02000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_UART2_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		i2c0: i2c@8b10000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b10000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C0_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@8b11000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b11000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C1_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@8b12000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b12000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C2_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@8b13000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b13000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C3_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@8b14000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b14000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C4_CLK>;
+			status = "disabled";
+		};
+
+		spi0: spi@8b1a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8b1a000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			cs-gpios = <&gpio7 1 0>;
+			clocks = <&crg HISTB_SPI0_CLK>;
+			clock-names = "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		emmc: mmc@9830000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x9830000 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_MMC_CIU_CLK>,
+				 <&crg HISTB_MMC_BIU_CLK>;
+			clock-names = "ciu", "biu";
+		};
+
+		gpio0: gpio@8b20000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b20000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio1: gpio@8b21000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b21000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio2: gpio@8b22000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b22000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio3: gpio@8b23000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b23000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio4: gpio@8b24000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b24000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio5: gpio@8004000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8004000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio6: gpio@8b26000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b26000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio7: gpio@8b27000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b27000 0x1000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio8: gpio@8b28000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b28000 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio9: gpio@8b29000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b29000 0x1000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio10: gpio@8b2a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2a000 0x1000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio11: gpio@8b2b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2b000 0x1000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio12: gpio@8b2c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2c000 0x1000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@9840000 {
+			compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+			reg = <0x9840000 0x1000>,
+			      <0x984300c 0x4>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_ETH0_MAC_CLK>,
+				 <&crg HISTB_ETH0_MACIF_CLK>;
+			clock-names = "mac_core", "mac_ifc";
+			resets = <&crg 0xcc 8>,
+				 <&crg 0xcc 10>,
+				 <&gmacphyrst 0>;
+			reset-names = "mac_core", "mac_ifc", "phy";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@9841000 {
+			compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+			reg = <0x9841000 0x1000>,
+			      <0x9843010 0x4>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_ETH1_MAC_CLK>,
+				 <&crg HISTB_ETH1_MACIF_CLK>;
+			clock-names = "mac_core", "mac_ifc";
+			resets = <&crg 0xcc 9>,
+				 <&crg 0xcc 11>,
+				 <&gmacphyrst 1>;
+			reset-names = "mac_core", "mac_ifc", "phy";
+			status = "disabled";
+		};
+
+		ir: ir@8001000 {
+			compatible = "hisilicon,hix5hd2-ir";
+			reg = <0x8001000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl HISTB_IR_CLK>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/include/dt-bindings/clock/histb-clock.h b/include/dt-bindings/clock/histb-clock.h
new file mode 100644
index 0000000..181c0f0
--- /dev/null
+++ b/include/dt-bindings/clock/histb-clock.h
@@ -0,0 +1,66 @@ 
+/*
+ * Copyright (c) 2016 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __DTS_HISTB_CLOCK_H
+#define __DTS_HISTB_CLOCK_H
+
+/* clocks provided by core CRG */
+#define HISTB_OSC_CLK			0
+#define HISTB_APB_CLK			1
+#define HISTB_AHB_CLK			2
+#define HISTB_UART1_CLK		3
+#define HISTB_UART2_CLK		4
+#define HISTB_UART3_CLK		5
+#define HISTB_I2C0_CLK		6
+#define HISTB_I2C1_CLK		7
+#define HISTB_I2C2_CLK		8
+#define HISTB_I2C3_CLK		9
+#define HISTB_I2C4_CLK		10
+#define HISTB_I2C5_CLK		11
+#define HISTB_SPI0_CLK		12
+#define HISTB_SPI1_CLK		13
+#define HISTB_SPI2_CLK		14
+#define HISTB_SCI_CLK			15
+#define HISTB_FMC_CLK			16
+#define HISTB_MMC_BIU_CLK		17
+#define HISTB_MMC_CIU_CLK		18
+#define HISTB_MMC_DRV_CLK		19
+#define HISTB_MMC_SAMPLE_CLK		20
+#define HISTB_SDIO0_BIU_CLK		21
+#define HISTB_SDIO0_CIU_CLK		22
+#define HISTB_SDIO0_DRV_CLK		23
+#define HISTB_SDIO0_SAMPLE_CLK	24
+#define HISTB_PCIE_AUX_CLK		25
+#define HISTB_PCIE_PIPE_CLK		26
+#define HISTB_PCIE_SYS_CLK		27
+#define HISTB_PCIE_BUS_CLK		28
+#define HISTB_ETH0_MAC_CLK		29
+#define HISTB_ETH0_MACIF_CLK		30
+#define HISTB_ETH1_MAC_CLK		31
+#define HISTB_ETH1_MACIF_CLK		32
+#define HISTB_COMBPHY1_CLK		33
+
+
+/* clocks provided by mcu CRG */
+#define HISTB_MCE_CLK	1
+#define HISTB_IR_CLK	2
+#define HISTB_TIMER01_CLK	3
+#define HISTB_LEDC_CLK	4
+#define HISTB_UART0_CLK	5
+#define HISTB_LSADC_CLK	6
+
+#endif	/* __DTS_HISTB_CLOCK_H */
diff --git a/include/dt-bindings/reset/ti-syscon.h b/include/dt-bindings/reset/ti-syscon.h
new file mode 100644
index 0000000..884fd91
--- /dev/null
+++ b/include/dt-bindings/reset/ti-syscon.h
@@ -0,0 +1,38 @@ 
+/*
+ * TI Syscon Reset definitions
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_RESET_TI_SYSCON_H__
+#define __DT_BINDINGS_RESET_TI_SYSCON_H__
+
+/*
+ * The reset does not support the feature and corresponding
+ * values are not valid
+ */
+#define ASSERT_NONE	(1 << 0)
+#define DEASSERT_NONE	(1 << 1)
+#define STATUS_NONE	(1 << 2)
+
+/* When set this function is activated by setting(vs clearing) this bit */
+#define ASSERT_SET	(1 << 3)
+#define DEASSERT_SET	(1 << 4)
+#define STATUS_SET	(1 << 5)
+
+/* The following are the inverse of the above and are added for consistency */
+#define ASSERT_CLEAR	(0 << 3)
+#define DEASSERT_CLEAR	(0 << 4)
+#define STATUS_CLEAR	(0 << 5)
+
+#endif