diff mbox series

[5/5] ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards

Message ID 1493905630-8788-5-git-send-email-jorge.ramirez-ortiz@linaro.org
State New
Headers show
Series [1/5] ARM64: poplar: add device tree bindings | expand

Commit Message

Jorge Ramirez-Ortiz May 4, 2017, 1:47 p.m. UTC 
This port adds support for:
        1) Serial
        2) eMMC
        3) USB

It has been tested with ARM TRUSTED FIRMWARE running u-boot as the
BL33 executable [see board's README]

eMMC has been tested for reading and booting the loader[1] and linux
kernels as well as saving the u-boot environment.

USB has been tested with ASIX networking adapter and SanDisk 7.4GB
drive.

PSCI has been tested via the reset call.

The firwmare upgrade process has been tested via TFTP and USB FAT
filesystem containing the fastboot.bin image in one of the partitions.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
---
 arch/arm/Kconfig                              |  11 ++
 arch/arm/include/asm/arch-hi3798cv200/dwmmc.h |  13 ++
 board/hisilicon/poplar/Kconfig                |  15 ++
 board/hisilicon/poplar/MAINTAINERS            |   6 +
 board/hisilicon/poplar/Makefile               |   7 +
 board/hisilicon/poplar/README                 | 232 ++++++++++++++++++++++++++
 board/hisilicon/poplar/poplar.c               |  88 ++++++++++
 configs/poplar_defconfig                      |  25 +++
 include/configs/poplar.h                      | 113 +++++++++++++
 9 files changed, 510 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-hi3798cv200/dwmmc.h
 create mode 100644 board/hisilicon/poplar/Kconfig
 create mode 100644 board/hisilicon/poplar/MAINTAINERS
 create mode 100644 board/hisilicon/poplar/Makefile
 create mode 100644 board/hisilicon/poplar/README
 create mode 100644 board/hisilicon/poplar/poplar.c
 create mode 100644 configs/poplar_defconfig
 create mode 100644 include/configs/poplar.h

Comments

Daniel Thompson May 4, 2017, 1:59 p.m. UTC | #1 
On 04/05/17 14:47, Jorge Ramirez-Ortiz wrote:
> diff --git a/include/configs/poplar.h b/include/configs/poplar.h
> new file mode 100644
> index 0000000..fb0ca19
> --- /dev/null
> +++ b/include/configs/poplar.h
> @@ -0,0 +1,113 @@
> +/*
> + * (C) Copyright 2017 Linaro
> + *
> + * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> + *
> + * Configuration for Poplar 96boards CE. Parts were derived from other ARM
> + * configurations.
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#ifndef _POPLAR_H_
> +#define _POPLAR_H_
> +
> +#include <linux/sizes.h>
> +
> +/* network config */
> +#define CONFIG_NET_MULTI			1
> +#define CONFIG_PHY_GIGE				1
> +#define CONFIG_ARP_TIMEOUT			500000L
> +#define CONFIG_NET_RETRY_COUNT 			50
> +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 	1
> +#define CONFIG_SYS_RX_ETH_BUFFER		16
> +#define CONFIG_NET_RANDOM_ETHADDR
> +
> +/* memory */
> +#define PHYS_SDRAM_1				0x00000000
> +#define PHYS_SDRAM_1_SIZE			0x40000000
> +#define CONFIG_NR_DRAM_BANKS			4
> +#define DRAM_BANK_SIZE				0x10000000
> +
> +/* sys */
> +#define CONFIG_SYS_BOOTM_LEN 			0x1400000
> +#define CONFIG_SYS_INIT_RAM_SIZE		0x100000
> +#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
> +#define CONFIG_SYS_INIT_SP_ADDR			(PHYS_SDRAM_1 + 0x200000)
> +#define CONFIG_SYS_LOAD_ADDR			(PHYS_SDRAM_1 + 0x800000)
> +#define CONFIG_SYS_MALLOC_LEN			(PHYS_SDRAM_1 + SZ_8M)
> +
> +/* must match bl33.bin load address */
> +#define CONFIG_SYS_TEXT_BASE			0x37000000
> +
> +/* generic gimer */
> +#define COUNTER_FREQUENCY			19000000
> +
> +/* generic interrupt controller definitions */
> +#define GICD_BASE				0xF1001000
> +#define GICC_BASE				0xF1002000
> +
> +/* serial port PL010/PL011 */
> +#define CONFIG_PL01X_SERIAL
> +
> +/* USB configuration */
> +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT		2
> +#define CONFIG_SYS_USB_EVENT_POLL
> +#define CONFIG_USB_ETHER_SMSC95XX
> +#define CONFIG_USB_HOST_ETHER
> +#define CONFIG_USB_ETHER_ASIX
> +
> +/* SD/MMC configuration */
> +#define CONFIG_BOUNCE_BUFFER
> +/*****************************************************************************
> + *  Initial environment variables
> + *****************************************************************************/
> +
> +#define CONFIG_NETMASK				255.255.255.0
> +#define CONFIG_SERVERIP				192.168.1.4
> +#define CONFIG_GATEWAYIP			192.168.1.1
> +
> +#define BOOT_TARGET_DEVICES(func) 					\
> +					func(USB, usb, 0)		\
> +					func(MMC, mmc, 0) 		\
> +					func(DHCP, dhcp, na)
> +
> +#ifndef CONFIG_SPL_BUILD
> +#include <config_distro_defaults.h>
> +#include <config_distro_bootcmd.h>
> +#endif
> +
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS					\
> +					"loader_mmc_blknum=0x0\0"	\
> +					"loader_mmc_nblks=0x780\0"	\
> +					"env_mmc_blknum=0xF0000\0"	\

Shouldn't this be 0x780 (i.e. a blknum rather than bytes)

> +					"env_mmc_nblks=0x80\0"		\
> +					"kernel_addr_r=0x30000000\0"	\
> +					"pxefile_addr_r=0x32000000\0"	\
> +					"scriptaddr=0x32000000\0"	\
> +					"fdt_addr_r=0x32200000\0"	\
> +					"ramdisk_addr_r=0x32400000\0"	\
> +	BOOTENV
> +
> +
> +/* Command line configuration */
> +#define CONFIG_ENV_IS_IN_MMC		1
> +#define CONFIG_SYS_MMC_ENV_DEV		0
> +#define CONFIG_ENV_OFFSET		0xF0000  /* env_mmc_blknum */
> +#define CONFIG_ENV_SIZE			0x10000  /* env_mmc_nblks bytes */

Possibly express these are (0x780 * 512) to make absolutely explicit the 
relationship to the blknum/nblks values?

> +#define CONFIG_CMD_ENV
> +#define CONFIG_FAT_WRITE
> +#define CONFIG_ENV_VARS_UBOOT_CONFIG
> +
> +/* Monitor Command Prompt */
> +#define CONFIG_CMDLINE_EDITING
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_SYS_CBSIZE			512
> +#define CONFIG_SYS_MAXARGS			64
> +#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
> +						sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
> +
> +#endif /* _POPLAR_H_ */
>
Tom Rini May 5, 2017, 2:32 p.m. UTC | #2 
On Thu, May 04, 2017 at 03:47:10PM +0200, Jorge Ramirez-Ortiz wrote:

[snip]
> +  > mkdir -p ~/poplar/src ~/poplar/bin

> +  > cd ~/poplar/src

> +  > git clone ssh://git@dev-private-git.linaro.org/aspen/staging/l-loader.git l-loader

> +  > git clone ssh://git@dev-private-git.linaro.org/aspen/staging/arm-trusted-firmware.git atf

> +  > git clone ssh://git@dev-private-git.linaro.org/aspen/staging/u-boot.git u-boot

> +  > git clone ssh://git@dev-private-git.linaro.org/aspen/tools.git


These are private repositories, no one else can clone from them.  Please
push this somewhere public.

> +int dram_init(void)

> +{

> +	gd->ram_size = PHYS_SDRAM_1_SIZE;


Please use get_ram_size(...) here.  Thanks!

-- 
Tom
Jorge Ramirez-Ortiz May 5, 2017, 4:55 p.m. UTC | #3 
On 05/05/2017 04:32 PM, Tom Rini wrote:
> On Thu, May 04, 2017 at 03:47:10PM +0200, Jorge Ramirez-Ortiz wrote:
>
> [snip]
>> +  > mkdir -p ~/poplar/src ~/poplar/bin
>> +  > cd ~/poplar/src
>> +  > git clone ssh://git@dev-private-git.linaro.org/aspen/staging/l-loader.git l-loader
>> +  > git clone ssh://git@dev-private-git.linaro.org/aspen/staging/arm-trusted-firmware.git atf
>> +  > git clone ssh://git@dev-private-git.linaro.org/aspen/staging/u-boot.git u-boot
>> +  > git clone ssh://git@dev-private-git.linaro.org/aspen/tools.git
> These are private repositories, no one else can clone from them.  Please
> push this somewhere public.


ACK
>
>> +int dram_init(void)
>> +{
>> +	gd->ram_size = PHYS_SDRAM_1_SIZE;
> Please use get_ram_size(...) here.  Thanks!
>
yeah, much nicer. thanks!
Jorge Ramirez-Ortiz May 10, 2017, 3:22 p.m. UTC | #4 
On 05/04/2017 03:59 PM, Daniel Thompson wrote:
> On 04/05/17 14:47, Jorge Ramirez-Ortiz wrote:
>> diff --git a/include/configs/poplar.h b/include/configs/poplar.h
>> new file mode 100644
>> index 0000000..fb0ca19
>> --- /dev/null
>> +++ b/include/configs/poplar.h
>> @@ -0,0 +1,113 @@
>> +/*
>> + * (C) Copyright 2017 Linaro
>> + *
>> + * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
>> + *
>> + * Configuration for Poplar 96boards CE. Parts were derived from 
>> other ARM
>> + * configurations.
>> + *
>> + * SPDX-License-Identifier:    GPL-2.0+
>> + */
>> +
>> +#ifndef _POPLAR_H_
>> +#define _POPLAR_H_
>> +
>> +#include <linux/sizes.h>
>> +
>> +/* network config */
>> +#define CONFIG_NET_MULTI            1
>> +#define CONFIG_PHY_GIGE                1
>> +#define CONFIG_ARP_TIMEOUT            500000L
>> +#define CONFIG_NET_RETRY_COUNT             50
>> +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN     1
>> +#define CONFIG_SYS_RX_ETH_BUFFER        16
>> +#define CONFIG_NET_RANDOM_ETHADDR
>> +
>> +/* memory */
>> +#define PHYS_SDRAM_1                0x00000000
>> +#define PHYS_SDRAM_1_SIZE            0x40000000
>> +#define CONFIG_NR_DRAM_BANKS            4
>> +#define DRAM_BANK_SIZE                0x10000000
>> +
>> +/* sys */
>> +#define CONFIG_SYS_BOOTM_LEN             0x1400000
>> +#define CONFIG_SYS_INIT_RAM_SIZE        0x100000
>> +#define CONFIG_SYS_SDRAM_BASE            PHYS_SDRAM_1
>> +#define CONFIG_SYS_INIT_SP_ADDR            (PHYS_SDRAM_1 + 0x200000)
>> +#define CONFIG_SYS_LOAD_ADDR            (PHYS_SDRAM_1 + 0x800000)
>> +#define CONFIG_SYS_MALLOC_LEN            (PHYS_SDRAM_1 + SZ_8M)
>> +
>> +/* must match bl33.bin load address */
>> +#define CONFIG_SYS_TEXT_BASE            0x37000000
>> +
>> +/* generic gimer */
>> +#define COUNTER_FREQUENCY            19000000
>> +
>> +/* generic interrupt controller definitions */
>> +#define GICD_BASE                0xF1001000
>> +#define GICC_BASE                0xF1002000
>> +
>> +/* serial port PL010/PL011 */
>> +#define CONFIG_PL01X_SERIAL
>> +
>> +/* USB configuration */
>> +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS    3
>> +#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
>> +#define CONFIG_SYS_USB_EVENT_POLL
>> +#define CONFIG_USB_ETHER_SMSC95XX
>> +#define CONFIG_USB_HOST_ETHER
>> +#define CONFIG_USB_ETHER_ASIX
>> +
>> +/* SD/MMC configuration */
>> +#define CONFIG_BOUNCE_BUFFER
>> +/***************************************************************************** 
>>
>> + *  Initial environment variables
>> + 
>> *****************************************************************************/
>> +
>> +#define CONFIG_NETMASK                255.255.255.0
>> +#define CONFIG_SERVERIP                192.168.1.4
>> +#define CONFIG_GATEWAYIP            192.168.1.1
>> +
>> +#define BOOT_TARGET_DEVICES(func)                     \
>> +                    func(USB, usb, 0)        \
>> +                    func(MMC, mmc, 0)         \
>> +                    func(DHCP, dhcp, na)
>> +
>> +#ifndef CONFIG_SPL_BUILD
>> +#include <config_distro_defaults.h>
>> +#include <config_distro_bootcmd.h>
>> +#endif
>> +
>> +
>> +#define CONFIG_EXTRA_ENV_SETTINGS                    \
>> +                    "loader_mmc_blknum=0x0\0"    \
>> +                    "loader_mmc_nblks=0x780\0"    \
>> +                    "env_mmc_blknum=0xF0000\0"    \
>
> Shouldn't this be 0x780 (i.e. a blknum rather than bytes)

yes!


>
>> + "env_mmc_nblks=0x80\0"        \
>> +                    "kernel_addr_r=0x30000000\0"    \
>> +                    "pxefile_addr_r=0x32000000\0"    \
>> +                    "scriptaddr=0x32000000\0"    \
>> +                    "fdt_addr_r=0x32200000\0"    \
>> +                    "ramdisk_addr_r=0x32400000\0"    \
>> +    BOOTENV
>> +
>> +
>> +/* Command line configuration */
>> +#define CONFIG_ENV_IS_IN_MMC        1
>> +#define CONFIG_SYS_MMC_ENV_DEV        0
>> +#define CONFIG_ENV_OFFSET        0xF0000  /* env_mmc_blknum */
>> +#define CONFIG_ENV_SIZE            0x10000  /* env_mmc_nblks bytes */
>
> Possibly express these are (0x780 * 512) to make absolutely explicit 
> the relationship to the blknum/nblks values?

OK.

>
>> +#define CONFIG_CMD_ENV
>> +#define CONFIG_FAT_WRITE
>> +#define CONFIG_ENV_VARS_UBOOT_CONFIG
>> +
>> +/* Monitor Command Prompt */
>> +#define CONFIG_CMDLINE_EDITING
>> +#define CONFIG_SYS_LONGHELP
>> +#define CONFIG_SYS_CBSIZE            512
>> +#define CONFIG_SYS_MAXARGS            64
>> +#define CONFIG_SYS_PBSIZE            (CONFIG_SYS_CBSIZE + \
>> +                        sizeof(CONFIG_SYS_PROMPT) + 16)
>> +#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
>> +
>> +#endif /* _POPLAR_H_ */
>>
>
diff mbox series

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1df6b36..d4eba7c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -816,6 +816,16 @@  config TARGET_HIKEY
 	  Support for HiKey 96boards platform. It features a HI6220
 	  SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 
+config TARGET_POPLAR
+	bool "Support Poplar 96boards Enterprise Edition Platform"
+	select ARM64
+	select DM
+	select DM_SERIAL
+	select OF_CONTROL
+	  help
+	  Support for Poplar 96boards platform. It features a HI3798cv200
+	  SoC, with 4xA53 CPU, MaliT720 GPU, and 1GB RAM.
+
 config TARGET_LS1012AQDS
 	bool "Support ls1012aqds"
 	select ARCH_LS1012A
@@ -1145,6 +1155,7 @@  source "board/grinn/chiliboard/Kconfig"
 source "board/gumstix/pepper/Kconfig"
 source "board/h2200/Kconfig"
 source "board/hisilicon/hikey/Kconfig"
+source "board/hisilicon/poplar/Kconfig"
 source "board/imx31_phycore/Kconfig"
 source "board/isee/igep0033/Kconfig"
 source "board/olimex/mx23_olinuxino/Kconfig"
diff --git a/arch/arm/include/asm/arch-hi3798cv200/dwmmc.h b/arch/arm/include/asm/arch-hi3798cv200/dwmmc.h
new file mode 100644
index 0000000..1060d94
--- /dev/null
+++ b/arch/arm/include/asm/arch-hi3798cv200/dwmmc.h
@@ -0,0 +1,13 @@ 
+/*
+ * (C) Copyright 2017 Linaro
+ * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _HI3798cv200_DWMMC_H_
+#define _HI3798cv200_DWMMC_H_
+
+int hi6220_dwmci_add_port(int index, u32 regbase, int bus_width);
+
+#endif /* _HI3798cv200_DWMMC_H_ */
diff --git a/board/hisilicon/poplar/Kconfig b/board/hisilicon/poplar/Kconfig
new file mode 100644
index 0000000..3397295
--- /dev/null
+++ b/board/hisilicon/poplar/Kconfig
@@ -0,0 +1,15 @@ 
+if TARGET_POPLAR
+
+config SYS_BOARD
+	default "poplar"
+
+config SYS_VENDOR
+	default "hisilicon"
+
+config SYS_SOC
+	default "hi3798cv200"
+
+config SYS_CONFIG_NAME
+	default "poplar"
+
+endif
diff --git a/board/hisilicon/poplar/MAINTAINERS b/board/hisilicon/poplar/MAINTAINERS
new file mode 100644
index 0000000..0cc01c8
--- /dev/null
+++ b/board/hisilicon/poplar/MAINTAINERS
@@ -0,0 +1,6 @@ 
+Poplar BOARD
+M:     Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+S:     Maintained
+F:     board/hisilicon/poplar
+F:     include/configs/poplar.h
+F:     configs/poplar_defconfig
diff --git a/board/hisilicon/poplar/Makefile b/board/hisilicon/poplar/Makefile
new file mode 100644
index 0000000..101545d
--- /dev/null
+++ b/board/hisilicon/poplar/Makefile
@@ -0,0 +1,7 @@ 
+#
+# (C) Copyright 2017 Linaro
+# Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+obj-y	:= poplar.o
diff --git a/board/hisilicon/poplar/README b/board/hisilicon/poplar/README
new file mode 100644
index 0000000..015eef6
--- /dev/null
+++ b/board/hisilicon/poplar/README
@@ -0,0 +1,232 @@ 
+================================================================================
+			Board Information
+================================================================================
+
+Developed by HiSilicon, the board features the Hi3798C V200 with an
+integrated quad-core 64-bit ARM Cortex A53 processor and high
+performance Mali T720 GPU, making it capable of running any commercial
+set-top solution based on Linux or Android. Its high performance
+specification also supports a premium user experience with up to H.265
+HEVC decoding of 4K video at 60 frames per second.
+
+SOC  Hisilicon Hi3798CV200
+CPU  Quad-core ARM Cortex-A53 64 bit
+DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB 
+USB  Two USB 2.0 ports One USB 3.0 ports
+CONSOLE  USB-micro port for console support
+ETHERNET  1 GBe Ethernet
+PCIE  One PCIe 2.0 interfaces
+JTAG  8-Pin JTAG
+EXPANSION INTERFACE  Linaro 96Boards Low Speed Expansion slot
+DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
+WIFI  802.11AC 2*2 with Bluetooth
+CONNECTORS  One connector for Smart Card One connector for TSI
+
+
+================================================================================
+			BUILD INSTRUCTIONS
+================================================================================
+
+Compile from source:
+====================
+
+Get all the sources
+
+  > mkdir -p ~/poplar/src ~/poplar/bin
+  > cd ~/poplar/src
+  > git clone ssh://git@dev-private-git.linaro.org/aspen/staging/l-loader.git l-loader
+  > git clone ssh://git@dev-private-git.linaro.org/aspen/staging/arm-trusted-firmware.git atf
+  > git clone ssh://git@dev-private-git.linaro.org/aspen/staging/u-boot.git u-boot
+  > git clone ssh://git@dev-private-git.linaro.org/aspen/tools.git
+
+Compile U-Boot:
+===============
+
+  Prerequisite:
+  # sudo apt-get install device-tree-compiler
+
+  > cd ~/poplar/src/u-boot
+  > make CROSS_COMPILE=aarch64-linux-gnu- poplar_defconfig
+  > make CROSS_COMPILE=aarch64-linux-gnu-
+  > cp u-boot.bin ~/poplar/bin
+
+Compile ARM Trusted Firmware (ATF):
+===================================
+
+  > cd ~/poplar/src/atf
+  > make CROSS_COMPILE=aarch64-linux-gnu- all fip \
+		SPD=none BL33=~/poplar/bin/u-boot.bin DEBUG=1 PLAT=hi3798cv200
+
+Copy resulting binaries
+  > cp build/hi3798cv200/debug/bl1.bin ~/poplar/src/l-loader/atf/
+  > cp build/hi3798cv200/debug/fip.bin ~/poplar/src/l-loader/atf/
+
+Compile l-loader:
+=================
+
+  > cd ~/poplar/src/l-loader
+  > make clean
+  > make CROSS_COMPILE=arm-linux-gnueabi-
+
+   Due to BootROM requiremets, rename l-loader.bin to fastboot.bin:
+  > cp l-loader.bin ~/poplar/bin/fastboot.bin
+
+
+================================================================================
+			FLASH INSTRUCTIONS
+================================================================================
+
+Two methods:
+
+Using USB debrick support:
+	Copy fastboot.bin to a FAT partition on the USB drive and reboot the
+       poplar board while pressing S3(usb_boot).
+
+       The system will execute the new u-boot and boot into a shell which you
+       can then use to write to eMMC.
+
+Using U-BOOT from shell:
+	1) using AXIS usb ethernet dongle and tftp
+	2) using FAT formated USB drive
+
+
+1. TFTP (USB ethernet dongle)
+=============================
+
+Plug a USB AXIS ethernet dongle on any of the USB2 ports on the Poplar board.
+Copy fastboot.bin to your tftp server.
+In u-boot make sure your network is properly setup.
+
+Then
+
+=> tftp 0x30000000 fastboot.bin
+starting USB...
+USB0:   USB EHCI 1.00
+scanning bus 0 for devices... 1 USB Device(s) found
+USB1:   USB EHCI 1.00
+scanning bus 1 for devices... 3 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 1 Ethernet Device(s) found
+Waiting for Ethernet connection... done.
+Using asx0 device
+TFTP from server 192.168.1.4; our IP address is 192.168.1.10
+Filename 'poplar/fastboot.bin'.
+Load address: 0x30000000
+Loading: #################################################################
+	 #################################################################
+	 ###############################################################
+	 2 MiB/s
+done
+Bytes transferred = 983040 (f0000 hex)
+
+=> mmc write 0x30000000 0 0x780
+
+MMC write: dev # 0, block # 0, count 1920 ... 1920 blocks written: OK
+=> reset
+
+
+2. USING USB FAT DRIVE
+=======================
+
+Copy fastboot.bin to any partition on a FAT32 formated usb flash drive.
+Enter the uboot prompt
+
+=> fatls usb 0:2
+   983040   fastboot.bin
+
+1 file(s), 0 dir(s)
+
+=> fatload usb 0:2 0x30000000 fastboot.bin
+reading fastboot.bin
+983040 bytes read in 44 ms (21.3 MiB/s)
+
+=> mmc write 0x30000000 0 0x780
+
+MMC write: dev # 0, block # 0, count 1920 ... 1920 blocks written: OK
+
+
+================================================================================
+				BOOT TRACE
+================================================================================
+
+Bootrom start
+Boot Media: eMMC
+Decrypt auxiliary code ...OK
+
+lsadc voltage min: 000000FE, max: 000000FF, aver: 000000FE, index: 00000000
+
+Entry boot auxiliary code
+
+Auxiliary code - v1.00
+DDR code - V1.1.2 20160205
+Build: Mar 24 2016 - 17:09:44
+Reg Version:  v134
+Reg Time:     2016/03/18 09:44:55
+Reg Name:     hi3798cv2dmb_hi3798cv200_ddr3_2gbyte_8bitx4_4layers.reg
+
+Boot auxiliary code success
+Bootrom success
+
+LOADER:  Switched to aarch64 mode
+LOADER:  Entering ARM TRUSTED FIRMWARE
+LOADER:  CPU0 executes at 0x000ce000
+
+INFO:    BL1: 0xe1000 - 0xe7000 [size = 24576]
+NOTICE:  Booting Trusted Firmware
+NOTICE:  BL1: v1.3(debug):v1.3-372-g1ba9c60
+NOTICE:  BL1: Built : 17:51:33, Apr 30 2017
+INFO:    BL1: RAM 0xe1000 - 0xe7000
+INFO:    BL1: Loading BL2
+INFO:    Loading image id=1 at address 0xe9000
+INFO:    Image id=1 loaded at address 0xe9000, size = 0x5008
+NOTICE:  BL1: Booting BL2
+INFO:    Entry point address = 0xe9000
+INFO:    SPSR = 0x3c5
+NOTICE:  BL2: v1.3(debug):v1.3-372-g1ba9c60
+NOTICE:  BL2: Built : 17:51:33, Apr 30 2017
+INFO:    BL2: Loading BL31
+INFO:    Loading image id=3 at address 0x129000
+INFO:    Image id=3 loaded at address 0x129000, size = 0x8038
+INFO:    BL2: Loading BL33
+INFO:    Loading image id=5 at address 0x37000000
+INFO:    Image id=5 loaded at address 0x37000000, size = 0x58f17
+NOTICE:  BL1: Booting BL31
+INFO:    Entry point address = 0x129000
+INFO:    SPSR = 0x3cd
+INFO:    Boot bl33 from 0x37000000 for 364311 Bytes
+NOTICE:  BL31: v1.3(debug):v1.3-372-g1ba9c60
+NOTICE:  BL31: Built : 17:51:33, Apr 30 2017
+INFO:    BL31: Initializing runtime services
+INFO:    BL31: Preparing for EL3 exit to normal world
+INFO:    Entry point address = 0x37000000
+INFO:    SPSR = 0x3c9
+
+
+U-Boot 2017.05-rc2-00130-gd2255b0 (Apr 30 2017 - 17:51:28 +0200)poplar
+
+Model: HiSilicon Poplar Development Board
+BOARD: Hisilicon HI3798cv200 Poplar
+DRAM:  1 GiB
+MMC:   Hisilicon DWMMC: 0
+In:    serial@f8b00000
+Out:   serial@f8b00000
+Err:   serial@f8b00000
+Net:   Net Initialization Skipped
+No ethernet found.
+
+Hit any key to stop autoboot:  0
+starting USB...
+USB0:   USB EHCI 1.00
+scanning bus 0 for devices... 1 USB Device(s) found
+USB1:   USB EHCI 1.00
+scanning bus 1 for devices... 4 USB Device(s) found
+       scanning usb for storage devices... 1 Storage Device(s) found
+       scanning usb for ethernet devices... 1 Ethernet Device(s) found
+
+USB device 0:
+    Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade
+	    Type: Removable Hard Disk
+	    Capacity: 7632.0 MB = 7.4 GB (15630336 x 512)
+... is now current device
+Scanning usb 0:1...
+=>
diff --git a/board/hisilicon/poplar/poplar.c b/board/hisilicon/poplar/poplar.c
new file mode 100644
index 0000000..448e99d
--- /dev/null
+++ b/board/hisilicon/poplar/poplar.c
@@ -0,0 +1,88 @@ 
+/*
+ * (C) Copyright 2017 Linaro
+ * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/hi3798cv200.h>
+#include <linux/arm-smccc.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/armv8/mmu.h>
+#include <asm/io.h>
+#include <usb.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct mm_region poplar_mem_map[] = {
+	{
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		0,
+	}
+};
+
+struct mm_region *mem_map = poplar_mem_map;
+
+int checkboard(void)
+{
+	puts("BOARD: Hisilicon HI3798cv200 Poplar\n");
+
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+	psci_system_reset();
+}
+
+int dram_init(void)
+{
+	gd->ram_size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	const size_t len = DRAM_BANK_SIZE;
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		gd->bd->bi_dram[i].start = PHYS_SDRAM_1 + i * len;
+		gd->bd->bi_dram[i].size = len;
+	}
+
+	return 0;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int ret;
+
+	ret = hi6220_dwmci_add_port(0, REG_BASE_MMC0, 8);
+	if (ret)
+		printf("mmc init error (%d)\n", ret);
+
+	return ret;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_HI3798CV200_POPLAR;
+
+	return 0;
+}
+
diff --git a/configs/poplar_defconfig b/configs/poplar_defconfig
new file mode 100644
index 0000000..5bce3e8
--- /dev/null
+++ b/configs/poplar_defconfig
@@ -0,0 +1,25 @@ 
+CONFIG_ARM=y
+CONFIG_TARGET_POPLAR=y
+CONFIG_IDENT_STRING="poplar"
+CONFIG_DEFAULT_DEVICE_TREE="hi3798cv200-poplar"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_DISPLAY_CPUINFO=n
+CONFIG_DISPLAY_BOARDINFO=y
+CONFIG_ISO_PARTITION=n
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_K3=y
+CONFIG_PL011_SERIAL=y
+CONFIG_PSCI_RESET=y
+CONFIG_USB=y
+CONFIG_USB_EHCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_POPLAR=y
+CONFIG_NET=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_DM_USB is not set
+# CONFIG_DM_GPIO is not set
+CONFIG_LIB_RAND=y
+CONFIG_CMD_UNZIP=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
diff --git a/include/configs/poplar.h b/include/configs/poplar.h
new file mode 100644
index 0000000..fb0ca19
--- /dev/null
+++ b/include/configs/poplar.h
@@ -0,0 +1,113 @@ 
+/*
+ * (C) Copyright 2017 Linaro
+ *
+ * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ *
+ * Configuration for Poplar 96boards CE. Parts were derived from other ARM
+ * configurations.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _POPLAR_H_
+#define _POPLAR_H_
+
+#include <linux/sizes.h>
+
+/* network config */
+#define CONFIG_NET_MULTI			1
+#define CONFIG_PHY_GIGE				1
+#define CONFIG_ARP_TIMEOUT			500000L
+#define CONFIG_NET_RETRY_COUNT 			50
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 	1
+#define CONFIG_SYS_RX_ETH_BUFFER		16
+#define CONFIG_NET_RANDOM_ETHADDR
+
+/* memory */
+#define PHYS_SDRAM_1				0x00000000
+#define PHYS_SDRAM_1_SIZE			0x40000000
+#define CONFIG_NR_DRAM_BANKS			4
+#define DRAM_BANK_SIZE				0x10000000
+
+/* sys */
+#define CONFIG_SYS_BOOTM_LEN 			0x1400000
+#define CONFIG_SYS_INIT_RAM_SIZE		0x100000
+#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR			(PHYS_SDRAM_1 + 0x200000)
+#define CONFIG_SYS_LOAD_ADDR			(PHYS_SDRAM_1 + 0x800000)
+#define CONFIG_SYS_MALLOC_LEN			(PHYS_SDRAM_1 + SZ_8M)
+
+/* must match bl33.bin load address */
+#define CONFIG_SYS_TEXT_BASE			0x37000000
+
+/* generic gimer */
+#define COUNTER_FREQUENCY			19000000
+
+/* generic interrupt controller definitions */
+#define GICD_BASE				0xF1001000
+#define GICC_BASE				0xF1002000
+
+/* serial port PL010/PL011 */
+#define CONFIG_PL01X_SERIAL
+
+/* USB configuration */
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT		2
+#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* SD/MMC configuration */
+#define CONFIG_BOUNCE_BUFFER
+/*****************************************************************************
+ *  Initial environment variables
+ *****************************************************************************/
+
+#define CONFIG_NETMASK				255.255.255.0
+#define CONFIG_SERVERIP				192.168.1.4
+#define CONFIG_GATEWAYIP			192.168.1.1
+
+#define BOOT_TARGET_DEVICES(func) 					\
+					func(USB, usb, 0)		\
+					func(MMC, mmc, 0) 		\
+					func(DHCP, dhcp, na)
+
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#include <config_distro_bootcmd.h>
+#endif
+
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+					"loader_mmc_blknum=0x0\0"	\
+					"loader_mmc_nblks=0x780\0"	\
+					"env_mmc_blknum=0xF0000\0"	\
+					"env_mmc_nblks=0x80\0"		\
+					"kernel_addr_r=0x30000000\0"	\
+					"pxefile_addr_r=0x32000000\0"	\
+					"scriptaddr=0x32000000\0"	\
+					"fdt_addr_r=0x32200000\0"	\
+					"ramdisk_addr_r=0x32400000\0"	\
+	BOOTENV
+
+
+/* Command line configuration */
+#define CONFIG_ENV_IS_IN_MMC		1
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_OFFSET		0xF0000  /* env_mmc_blknum */
+#define CONFIG_ENV_SIZE			0x10000  /* env_mmc_nblks bytes */
+#define CONFIG_CMD_ENV
+#define CONFIG_FAT_WRITE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+
+/* Monitor Command Prompt */
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE			512
+#define CONFIG_SYS_MAXARGS			64
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
+						sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
+
+#endif /* _POPLAR_H_ */