@@ -894,12 +894,11 @@ config ARCH_UNIPHIER
select OF_CONTROL
select OF_LIBFDT
select PINCTRL
- select SPL
- select SPL_DM
- select SPL_LIBCOMMON_SUPPORT
- select SPL_LIBGENERIC_SUPPORT
- select SPL_OF_CONTROL
- select SPL_PINCTRL
+ select SPL_DM if SPL
+ select SPL_LIBCOMMON_SUPPORT if SPL
+ select SPL_LIBGENERIC_SUPPORT if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_PINCTRL if SPL
select SUPPORT_SPL
help
Support for UniPhier SoC family developed by Socionext Inc.
@@ -13,66 +13,81 @@ config ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_64BIT
bool
select ARM64
- select SPL_SEPARATE_BSS
- select ARMV8_MULTIENTRY
- select ARMV8_SPIN_TABLE
+ select SPL_SEPARATE_BSS if SPL
+ select ARMV8_MULTIENTRY if SPL
+ select ARMV8_SPIN_TABLE if SPL
choice
prompt "UniPhier SoC select"
default ARCH_UNIPHIER_PRO4
config ARCH_UNIPHIER_SLD3
- bool "UniPhier PH1-sLD3 SoC"
+ bool "UniPhier sLD3 SoC"
select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_LD4_SLD8
- bool "UniPhier PH1-LD4/PH1-sLD8 SoC"
+ bool "UniPhier LD4/sLD8 SoCs"
select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_PRO4
- bool "UniPhier PH1-Pro4 SoC"
+ bool "UniPhier Pro4 SoC"
select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_PRO5_PXS2_LD6B
- bool "UniPhier PH1-Pro5/ProXstream2/PH1-LD6b SoC"
+ bool "UniPhier Pro5/PXs2/LD6b SoCs"
select ARCH_UNIPHIER_32BIT
-config ARCH_UNIPHIER_LD11
- bool "UniPhier PH1-LD11 SoC"
+config ARCH_UNIPHIER_LD11_SINGLE
+ bool "UniPhier LD11 SoC"
select ARCH_UNIPHIER_64BIT
-config ARCH_UNIPHIER_LD20
- bool "UniPhier PH1-LD20 SoC"
+config ARCH_UNIPHIER_LD20_SINGLE
+ bool "UniPhier LD20 SoC"
+ select ARCH_UNIPHIER_64BIT
+
+config ARCH_UNIPHIER_V8_MULTI
+ bool "UniPhier V8 SoCs"
+ depends on !SPL
select ARCH_UNIPHIER_64BIT
- select OF_BOARD_SETUP
endchoice
config ARCH_UNIPHIER_LD4
- bool "Enable UniPhier PH1-LD4 SoC support"
+ bool "Enable UniPhier LD4 SoC support"
depends on ARCH_UNIPHIER_LD4_SLD8
default y
config ARCH_UNIPHIER_SLD8
- bool "Enable UniPhier PH1-sLD8 SoC support"
+ bool "Enable UniPhier sLD8 SoC support"
depends on ARCH_UNIPHIER_LD4_SLD8
default y
config ARCH_UNIPHIER_PRO5
- bool "Enable UniPhier PH1-Pro5 SoC support"
+ bool "Enable UniPhier Pro5 SoC support"
depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
default y
config ARCH_UNIPHIER_PXS2
- bool "Enable UniPhier ProXstream2 SoC support"
+ bool "Enable UniPhier Pxs2 SoC support"
depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
default y
config ARCH_UNIPHIER_LD6B
- bool "Enable UniPhier PH1-LD6b SoC support"
+ bool "Enable UniPhier LD6b SoC support"
depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
default y
+config ARCH_UNIPHIER_LD11
+ bool "Enable UniPhier LD11 SoC support" if ARCH_UNIPHIER_V8_MULTI
+ depends on ARCH_UNIPHIER_LD11_SINGLE || ARCH_UNIPHIER_V8_MULTI
+ default y
+
+config ARCH_UNIPHIER_LD20
+ bool "Enable UniPhier LD20 SoC support" if ARCH_UNIPHIER_V8_MULTI
+ depends on ARCH_UNIPHIER_LD20_SINGLE || ARCH_UNIPHIER_V8_MULTI
+ select OF_BOARD_SETUP
+ default y
+
config CACHE_UNIPHIER
bool "Enable the UniPhier L2 cache controller"
depends on ARCH_UNIPHIER_32BIT
@@ -5,6 +5,9 @@
ifdef CONFIG_SPL_BUILD
obj-y += timer.o
else
-obj-y += mem_map.o smp.o smp_kick_cpus.o
+obj-y += mem_map.o
+ifdef CONFIG_ARMV8_MULTIENTRY
+obj-y += smp.o smp_kick_cpus.o
obj-$(CONFIG_ARCH_UNIPHIER_LD20) += arm-cci500.o
endif
+endif
@@ -73,8 +73,9 @@ static void uniphier_ld20_misc_init(void)
writel(0x0000b500, 0x6184e024);
writel(0x00000001, 0x6184e000);
}
-
+#ifdef CONFIG_ARMV8_MULTIENTRY
cci500_init(2);
+#endif
}
#endif
@@ -235,7 +236,7 @@ int board_init(void)
led_puts("U6");
-#ifdef CONFIG_ARM64
+#ifdef CONFIG_ARMV8_MULTIENTRY
uniphier_smp_kick_all_cpus();
#endif
@@ -2,11 +2,12 @@ CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_ARCH_UNIPHIER_LD11=y
+CONFIG_ARCH_UNIPHIER_LD11_SINGLE=y
CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld11-ref"
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_XIMG is not set
@@ -2,11 +2,12 @@ CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_ARCH_UNIPHIER_LD20=y
+CONFIG_ARCH_UNIPHIER_LD20_SINGLE=y
CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_XIMG is not set
@@ -9,6 +9,7 @@ CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld4-ref"
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
@@ -8,6 +8,7 @@ CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-pro4-ref"
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
@@ -9,6 +9,7 @@ CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-pxs2-vodka"
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
@@ -9,6 +9,7 @@ CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-sld3-ref"
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
@@ -85,7 +85,7 @@
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 1
-#ifdef CONFIG_ARM64
+#ifdef CONFIG_ARMV8_MULTIENTRY
#define CPU_RELEASE_ADDR 0x80000000
#define COUNTER_FREQUENCY 50000000
#define CONFIG_GICV3
@@ -95,7 +95,7 @@
#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
#define GICR_BASE 0x5fe80000
#endif
-#else
+#elif !defined(CONFIG_ARM64)
/* Time clock 1MHz */
#define CONFIG_SYS_TIMER_RATE 1000000
#endif
@@ -276,6 +276,7 @@
/* subtract sizeof(struct image_header) */
#define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40)
+#ifdef CONFIG_SPL
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
#define CONFIG_SPL_MAX_SIZE 0x10000
@@ -285,5 +286,6 @@
#define CONFIG_SPL_BSS_START_ADDR 0x30016000
#endif
#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
+#endif
#endif /* __CONFIG_UNIPHIER_COMMON_H__ */
We may want to run different firmware before running U-Boot. For example, ARM Trusted Firmware runs before U-Boot, making U-Boot a non-secure world boot loader. In this case, the SoC might be initialized there, which enables us to skip SPL entirely. This commit removes "select SPL" to make it configurable. This also enables the Multi SoC support for the UniPhier ARMv8 SoCs. (CONFIG_ARCH_UNIPHIER_V8_MULTI) Thanks to the driver model and Device Tree, the U-Boot proper part is now written in a generic way. The board/SoC parameters reside in DT. The Multi SoC support increases the memory footprint a bit, but the U-Boot proper does not have strict memory constraint. This will mitigate the per-SoC (sometimes per-board) defconfig burden. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm/Kconfig | 11 ++++---- arch/arm/mach-uniphier/Kconfig | 49 +++++++++++++++++++++++------------ arch/arm/mach-uniphier/arm64/Makefile | 5 +++- arch/arm/mach-uniphier/board_init.c | 5 ++-- configs/uniphier_ld11_defconfig | 3 ++- configs/uniphier_ld20_defconfig | 3 ++- configs/uniphier_ld4_sld8_defconfig | 1 + configs/uniphier_pro4_defconfig | 1 + configs/uniphier_pxs2_ld6b_defconfig | 1 + configs/uniphier_sld3_defconfig | 1 + include/configs/uniphier.h | 6 +++-- 11 files changed, 56 insertions(+), 30 deletions(-) -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot