@@ -48,116 +48,177 @@ static void uniphier_setup_xirq(void)
writel(tmp, 0x55000090);
}
-static void uniphier_nand_pin_init(bool cs2)
+#ifdef CONFIG_ARCH_UNIPHIER_LD11
+static void uniphier_ld11_misc_init(void)
{
-#ifdef CONFIG_NAND_DENALI
- if (uniphier_pin_init(cs2 ? "nand2cs_grp" : "nand_grp"))
- pr_err("failed to init NAND pins\n");
-#endif
+ sg_set_pinsel(149, 14, 8, 4); /* XIRQ0 -> XIRQ0 */
+ sg_set_iectrl(149);
+ sg_set_pinsel(153, 14, 8, 4); /* XIRQ4 -> XIRQ4 */
+ sg_set_iectrl(153);
}
+#endif
-int board_init(void)
+#ifdef CONFIG_ARCH_UNIPHIER_LD20
+static void uniphier_ld20_misc_init(void)
{
- led_puts("U0");
+ sg_set_pinsel(149, 14, 8, 4); /* XIRQ0 -> XIRQ0 */
+ sg_set_iectrl(149);
+ sg_set_pinsel(153, 14, 8, 4); /* XIRQ4 -> XIRQ4 */
+ sg_set_iectrl(153);
+
+ /* ES1 errata: increase VDD09 supply to suppress VBO noise */
+ if (uniphier_get_soc_revision() == 1) {
+ writel(0x00000003, 0x6184e004);
+ writel(0x00000100, 0x6184e040);
+ writel(0x0000b500, 0x6184e024);
+ writel(0x00000001, 0x6184e000);
+ }
+
+ cci500_init(2);
+}
+#endif
+
+struct uniphier_initdata {
+ enum uniphier_soc_id soc_id;
+ bool nand_2cs;
+ void (*pll_init)(void);
+ void (*clk_init)(void);
+ void (*misc_init)(void);
+};
- switch (uniphier_get_soc_type()) {
+struct uniphier_initdata uniphier_initdata[] = {
#if defined(CONFIG_ARCH_UNIPHIER_SLD3)
- case SOC_UNIPHIER_SLD3:
- uniphier_nand_pin_init(true);
- led_puts("U1");
- uniphier_sld3_pll_init();
- uniphier_ld4_clk_init();
- break;
+ {
+ .soc_id = SOC_UNIPHIER_SLD3,
+ .nand_2cs = true,
+ .pll_init = uniphier_sld3_pll_init,
+ .clk_init = uniphier_ld4_clk_init,
+ },
#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
- case SOC_UNIPHIER_LD4:
- uniphier_nand_pin_init(true);
- led_puts("U1");
- uniphier_ld4_pll_init();
- uniphier_ld4_clk_init();
- break;
+ {
+ .soc_id = SOC_UNIPHIER_LD4,
+ .nand_2cs = true,
+ .pll_init = uniphier_ld4_pll_init,
+ .clk_init = uniphier_ld4_clk_init,
+ },
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
- case SOC_UNIPHIER_PRO4:
- uniphier_nand_pin_init(false);
- led_puts("U1");
- uniphier_pro4_pll_init();
- uniphier_pro4_clk_init();
- break;
+ {
+ .soc_id = SOC_UNIPHIER_PRO4,
+ .nand_2cs = false,
+ .pll_init = uniphier_pro4_pll_init,
+ .clk_init = uniphier_pro4_clk_init,
+ },
#endif
#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
- case SOC_UNIPHIER_SLD8:
- uniphier_nand_pin_init(true);
- led_puts("U1");
- uniphier_ld4_pll_init();
- uniphier_ld4_clk_init();
- break;
+ {
+ .soc_id = SOC_UNIPHIER_SLD8,
+ .nand_2cs = true,
+ .pll_init = uniphier_ld4_pll_init,
+ .clk_init = uniphier_ld4_clk_init,
+ },
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
- case SOC_UNIPHIER_PRO5:
- uniphier_nand_pin_init(true);
- led_puts("U1");
- uniphier_pro5_clk_init();
- break;
+ {
+ .soc_id = SOC_UNIPHIER_PRO5,
+ .nand_2cs = true,
+ .clk_init = uniphier_pro5_clk_init,
+ },
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
- case SOC_UNIPHIER_PXS2:
- uniphier_nand_pin_init(true);
- led_puts("U1");
- uniphier_pxs2_clk_init();
- break;
+ {
+ .soc_id = SOC_UNIPHIER_PXS2,
+ .nand_2cs = true,
+ .clk_init = uniphier_pxs2_clk_init,
+ },
#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
- case SOC_UNIPHIER_LD6B:
- uniphier_nand_pin_init(true);
- led_puts("U1");
- uniphier_pxs2_clk_init();
- break;
+ {
+ .soc_id = SOC_UNIPHIER_LD6B,
+ .nand_2cs = true,
+ .clk_init = uniphier_pxs2_clk_init,
+ },
#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD11)
- case SOC_UNIPHIER_LD11:
- uniphier_nand_pin_init(false);
- sg_set_pinsel(149, 14, 8, 4); /* XIRQ0 -> XIRQ0 */
- sg_set_iectrl(149);
- sg_set_pinsel(153, 14, 8, 4); /* XIRQ4 -> XIRQ4 */
- sg_set_iectrl(153);
- led_puts("U1");
- uniphier_ld11_pll_init();
- uniphier_ld11_clk_init();
- break;
+ {
+ .soc_id = SOC_UNIPHIER_LD11,
+ .nand_2cs = false,
+ .pll_init = uniphier_ld11_pll_init,
+ .clk_init = uniphier_ld11_clk_init,
+ .misc_init = uniphier_ld11_misc_init,
+ },
#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD20)
- case SOC_UNIPHIER_LD20:
- /* ES1 errata: increase VDD09 supply to suppress VBO noise */
- if (uniphier_get_soc_revision() == 1) {
- writel(0x00000003, 0x6184e004);
- writel(0x00000100, 0x6184e040);
- writel(0x0000b500, 0x6184e024);
- writel(0x00000001, 0x6184e000);
- }
- uniphier_nand_pin_init(false);
- sg_set_pinsel(149, 14, 8, 4); /* XIRQ0 -> XIRQ0 */
- sg_set_iectrl(149);
- sg_set_pinsel(153, 14, 8, 4); /* XIRQ4 -> XIRQ4 */
- sg_set_iectrl(153);
- led_puts("U1");
- uniphier_ld20_pll_init();
- uniphier_ld20_clk_init();
- cci500_init(2);
- break;
+ {
+ .soc_id = SOC_UNIPHIER_LD20,
+ .nand_2cs = false,
+ .pll_init = uniphier_ld20_pll_init,
+ .clk_init = uniphier_ld20_clk_init,
+ .misc_init = uniphier_ld20_misc_init,
+ },
#endif
- default:
- break;
+};
+
+static struct uniphier_initdata *uniphier_get_initdata(
+ enum uniphier_soc_id soc_id)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(uniphier_initdata); i++) {
+ if (uniphier_initdata[i].soc_id == soc_id)
+ return &uniphier_initdata[i];
}
- uniphier_setup_xirq();
+ return NULL;
+}
+
+int board_init(void)
+{
+ struct uniphier_initdata *initdata;
+ enum uniphier_soc_id soc_id;
+ int ret;
+
+ led_puts("U0");
+
+ soc_id = uniphier_get_soc_type();
+ initdata = uniphier_get_initdata(soc_id);
+ if (!initdata) {
+ pr_err("unsupported board\n");
+ return -EINVAL;
+ }
+
+ if (IS_ENABLED(CONFIG_NAND_DENALI)) {
+ ret = uniphier_pin_init(initdata->nand_2cs ?
+ "nand2cs_grp" : "nand_grp");
+ if (ret)
+ pr_err("failed to init NAND pins\n");
+ }
+
+ led_puts("U1");
+
+ if (initdata->pll_init)
+ initdata->pll_init();
led_puts("U2");
- support_card_late_init();
+ initdata->clk_init();
led_puts("U3");
+ if (initdata->misc_init)
+ initdata->misc_init();
+
+ led_puts("U4");
+
+ uniphier_setup_xirq();
+
+ led_puts("U5");
+
+ support_card_late_init();
+
+ led_puts("U6");
+
#ifdef CONFIG_ARM64
uniphier_smp_kick_all_cpus();
#endif
The code here is cluttered due to the switch statement. Introduce a table of callbacks to clean up the initialization code across SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm/mach-uniphier/board_init.c | 219 +++++++++++++++++++++++------------- 1 file changed, 140 insertions(+), 79 deletions(-) -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot