@@ -15,8 +15,6 @@ int uniphier_ld11_init(const struct uniphier_board_data *bd)
{
uniphier_ld11_sbc_init();
- support_card_reset();
-
support_card_init();
led_puts("L0");
@@ -15,8 +15,6 @@ int uniphier_ld20_init(const struct uniphier_board_data *bd)
{
uniphier_ld11_sbc_init();
- support_card_reset();
-
support_card_init();
led_puts("L0");
@@ -18,12 +18,10 @@ int uniphier_ld4_init(const struct uniphier_board_data *bd)
uniphier_ld4_sbc_init();
- support_card_reset();
+ support_card_init();
uniphier_ld4_dpll_init(bd);
- support_card_init();
-
led_puts("L0");
uniphier_memconf_2ch_init(bd);
@@ -16,12 +16,10 @@ int uniphier_pro4_init(const struct uniphier_board_data *bd)
{
uniphier_sbc_init_savepin();
- support_card_reset();
+ support_card_init();
uniphier_pro4_dpll_init(bd);
- support_card_init();
-
led_puts("L0");
uniphier_memconf_2ch_init(bd);
@@ -14,8 +14,6 @@ int uniphier_pro5_init(const struct uniphier_board_data *bd)
{
uniphier_sbc_init_savepin();
- support_card_reset();
-
support_card_init();
led_puts("L0");
@@ -16,8 +16,6 @@ int uniphier_pxs2_init(const struct uniphier_board_data *bd)
uniphier_pxs2_sbc_init();
- support_card_reset();
-
support_card_init();
led_puts("L0");
@@ -18,12 +18,10 @@ int uniphier_sld3_init(const struct uniphier_board_data *bd)
uniphier_sbc_init_admulti();
- support_card_reset();
+ support_card_init();
uniphier_sld3_dpll_init(bd);
- support_card_init();
-
led_puts("L0");
uniphier_memconf_3ch_no_disbit_init(bd);
@@ -18,12 +18,10 @@ int uniphier_sld8_init(const struct uniphier_board_data *bd)
uniphier_ld4_sbc_init();
- support_card_reset();
+ support_card_init();
uniphier_sld8_dpll_init(bd);
- support_card_init();
-
led_puts("L0");
uniphier_memconf_2ch_init(bd);
@@ -25,12 +25,12 @@
* bit[0]: LAN, I2C, LED
* bit[1]: UART
*/
-void support_card_reset_deassert(void)
+static void support_card_reset_deassert(void)
{
writel(0x00010000, MICRO_SUPPORT_CARD_RESET);
}
-void support_card_reset(void)
+static void support_card_reset(void)
{
writel(0x00020003, MICRO_SUPPORT_CARD_RESET);
}
@@ -57,6 +57,7 @@ int checkboard(void)
void support_card_init(void)
{
+ support_card_reset();
/*
* After power on, we need to keep the LAN controller in reset state
* for a while. (200 usec)
@@ -157,7 +158,7 @@ static void detect_num_flash_banks(void)
debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
}
#else /* CONFIG_SYS_NO_FLASH */
-void detect_num_flash_banks(void)
+static void detect_num_flash_banks(void)
{
};
#endif /* CONFIG_SYS_NO_FLASH */
@@ -10,15 +10,10 @@
#define MICRO_SUPPORT_CARD_H
#if defined(CONFIG_MICRO_SUPPORT_CARD)
-void support_card_reset(void);
void support_card_init(void);
void support_card_late_init(void);
void led_puts(const char *s);
#else
-static inline void support_card_reset(void)
-{
-}
-
static inline void support_card_init(void)
{
}
Splitting reset assertion (support_card_reset) and deassertion (support_card_init) is not adding much value any more. Handle all the initialization of Support Card in support_card_init(), then remove support_card_reset(). Also, detect_num_flash_banks() can have a static qualifier. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm/mach-uniphier/init/init-ld11.c | 2 -- arch/arm/mach-uniphier/init/init-ld20.c | 2 -- arch/arm/mach-uniphier/init/init-ld4.c | 4 +--- arch/arm/mach-uniphier/init/init-pro4.c | 4 +--- arch/arm/mach-uniphier/init/init-pro5.c | 2 -- arch/arm/mach-uniphier/init/init-pxs2.c | 2 -- arch/arm/mach-uniphier/init/init-sld3.c | 4 +--- arch/arm/mach-uniphier/init/init-sld8.c | 4 +--- arch/arm/mach-uniphier/micro-support-card.c | 7 ++++--- arch/arm/mach-uniphier/micro-support-card.h | 5 ----- 10 files changed, 8 insertions(+), 28 deletions(-) -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot