From patchwork Thu Feb 18 10:52:48 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Masahiro Yamada X-Patchwork-Id: 62166 Delivered-To: patch@linaro.org Received: by 10.112.43.199 with SMTP id y7csp510191lbl; Thu, 18 Feb 2016 02:53:11 -0800 (PST) X-Received: by 10.28.222.68 with SMTP id v65mr2751978wmg.66.1455792791269; Thu, 18 Feb 2016 02:53:11 -0800 (PST) Return-Path: Received: from theia.denx.de (theia.denx.de. [85.214.87.163]) by mx.google.com with ESMTP id l10si9353303wjx.231.2016.02.18.02.53.11; Thu, 18 Feb 2016 02:53:11 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of u-boot-bounces@lists.denx.de designates 85.214.87.163 as permitted sender) client-ip=85.214.87.163; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of u-boot-bounces@lists.denx.de designates 85.214.87.163 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 919D1A7564; Thu, 18 Feb 2016 11:52:53 +0100 (CET) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id f5HihA7vX6rj; Thu, 18 Feb 2016 11:52:53 +0100 (CET) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 737C1A756E; Thu, 18 Feb 2016 11:52:45 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 474F4A7506 for ; Thu, 18 Feb 2016 11:52:32 +0100 (CET) Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id XohXvRIByldB for ; Thu, 18 Feb 2016 11:52:32 +0100 (CET) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from conuserg009-v.nifty.com (conuserg009.nifty.com [202.248.44.35]) by theia.denx.de (Postfix) with ESMTPS id 31D91A750D for ; Thu, 18 Feb 2016 11:52:27 +0100 (CET) Received: from beagle.diag.org (p14090-ipngnfx01kyoto.kyoto.ocn.ne.jp [153.142.97.90]) (authenticated) by conuserg009-v.nifty.com with ESMTP id u1IAq5KM024194; Thu, 18 Feb 2016 19:52:06 +0900 X-Nifty-SrcIP: [153.142.97.90] From: Masahiro Yamada To: u-boot@lists.denx.de Date: Thu, 18 Feb 2016 19:52:48 +0900 Message-Id: <1455792770-16792-2-git-send-email-yamada.masahiro@socionext.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1455792770-16792-1-git-send-email-yamada.masahiro@socionext.com> References: <1455792770-16792-1-git-send-email-yamada.masahiro@socionext.com> Cc: Pantelis Antoniou Subject: [U-Boot] [PATCH v4 1/3] mmc: uniphier: add driver for UniPhier SD/MMC host controller X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.15 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" Add a driver for the on-chip SD/eMMC host controller used by UniPhier SoC family. Signed-off-by: Masahiro Yamada --- Changes in v4: - Add some comments about HOST_MODE register - Rename uniphier_sd_wait_irq() to uniphier_sd_wait_for_irq() Changes in v3: - Use dev_err/dev_dbg instead of pr_err/pr_debug - Tidy up uniphier_sd_set_ios() - Allow to use DMA even in SPL if the target address is DMA'able Changes in v2: - Fix the divisor bug on the older IP (on PH1-LD4, PH1-sLD8, PH1-Pro4) - Increase time out because "mmc erase" can sometimes take long - Move HOST_MODE register setting to uniphier_sd_init() because this register does not need setting multipule times. doc/README.uniphier | 1 + drivers/mmc/Kconfig | 6 + drivers/mmc/Makefile | 1 + drivers/mmc/uniphier-sd.c | 751 ++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 759 insertions(+) create mode 100644 drivers/mmc/uniphier-sd.c -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot diff --git a/doc/README.uniphier b/doc/README.uniphier index f03c207..c270ecb 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -93,6 +93,7 @@ Supported devices - UART (on-chip) - NAND + - SD/eMMC - USB 2.0 (EHCI) - USB 3.0 (xHCI) - GPIO diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 9f4b766..faffefd 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -37,4 +37,10 @@ config PIC32_SDHCI help Support for Microchip PIC32 SDHCI controller. +config MMC_UNIPHIER + bool "UniPhier SD/MMC Host Controller support" + depends on ARCH_UNIPHIER + help + This selects support for the SD/MMC Host Controller on UniPhier SoCs. + endmenu diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index c9c3e3e..b85e4bf 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_SH_SDHI) += sh_sdhi.o obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o +obj-$(CONFIG_MMC_UNIPHIER) += uniphier-sd.o obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o ifdef CONFIG_SPL_BUILD diff --git a/drivers/mmc/uniphier-sd.c b/drivers/mmc/uniphier-sd.c new file mode 100644 index 0000000..3bc4d94 --- /dev/null +++ b/drivers/mmc/uniphier-sd.c @@ -0,0 +1,751 @@ +/* + * Copyright (C) 2016 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define UNIPHIER_SD_CMD 0x000 /* command */ +#define UNIPHIER_SD_CMD_NOSTOP BIT(14) /* No automatic CMD12 issue */ +#define UNIPHIER_SD_CMD_MULTI BIT(13) /* multiple block transfer */ +#define UNIPHIER_SD_CMD_RD BIT(12) /* 1: read, 0: write */ +#define UNIPHIER_SD_CMD_DATA BIT(11) /* data transfer */ +#define UNIPHIER_SD_CMD_APP BIT(6) /* ACMD preceded by CMD55 */ +#define UNIPHIER_SD_CMD_NORMAL (0 << 8)/* auto-detect of resp-type */ +#define UNIPHIER_SD_CMD_RSP_NONE (3 << 8)/* response: none */ +#define UNIPHIER_SD_CMD_RSP_R1 (4 << 8)/* response: R1, R5, R6, R7 */ +#define UNIPHIER_SD_CMD_RSP_R1B (5 << 8)/* response: R1b, R5b */ +#define UNIPHIER_SD_CMD_RSP_R2 (6 << 8)/* response: R2 */ +#define UNIPHIER_SD_CMD_RSP_R3 (7 << 8)/* response: R3, R4 */ +#define UNIPHIER_SD_ARG 0x008 /* command argument */ +#define UNIPHIER_SD_STOP 0x010 /* stop action control */ +#define UNIPHIER_SD_STOP_SEC BIT(8) /* use sector count */ +#define UNIPHIER_SD_STOP_STP BIT(0) /* issue CMD12 */ +#define UNIPHIER_SD_SECCNT 0x014 /* sector counter */ +#define UNIPHIER_SD_RSP10 0x018 /* response[39:8] */ +#define UNIPHIER_SD_RSP32 0x020 /* response[71:40] */ +#define UNIPHIER_SD_RSP54 0x028 /* response[103:72] */ +#define UNIPHIER_SD_RSP76 0x030 /* response[127:104] */ +#define UNIPHIER_SD_INFO1 0x038 /* IRQ status 1 */ +#define UNIPHIER_SD_INFO1_CD BIT(5) /* state of card detect */ +#define UNIPHIER_SD_INFO1_INSERT BIT(4) /* card inserted */ +#define UNIPHIER_SD_INFO1_REMOVE BIT(3) /* card removed */ +#define UNIPHIER_SD_INFO1_CMP BIT(2) /* data complete */ +#define UNIPHIER_SD_INFO1_RSP BIT(0) /* response complete */ +#define UNIPHIER_SD_INFO2 0x03c /* IRQ status 2 */ +#define UNIPHIER_SD_INFO2_ERR_ILA BIT(15) /* illegal access err */ +#define UNIPHIER_SD_INFO2_CBSY BIT(14) /* command busy */ +#define UNIPHIER_SD_INFO2_BWE BIT(9) /* write buffer ready */ +#define UNIPHIER_SD_INFO2_BRE BIT(8) /* read buffer ready */ +#define UNIPHIER_SD_INFO2_DAT0 BIT(7) /* SDDAT0 */ +#define UNIPHIER_SD_INFO2_ERR_RTO BIT(6) /* response time out */ +#define UNIPHIER_SD_INFO2_ERR_ILR BIT(5) /* illegal read err */ +#define UNIPHIER_SD_INFO2_ERR_ILW BIT(4) /* illegal write err */ +#define UNIPHIER_SD_INFO2_ERR_TO BIT(3) /* time out error */ +#define UNIPHIER_SD_INFO2_ERR_END BIT(2) /* END bit error */ +#define UNIPHIER_SD_INFO2_ERR_CRC BIT(1) /* CRC error */ +#define UNIPHIER_SD_INFO2_ERR_IDX BIT(0) /* cmd index error */ +#define UNIPHIER_SD_INFO1_MASK 0x040 +#define UNIPHIER_SD_INFO2_MASK 0x044 +#define UNIPHIER_SD_CLKCTL 0x048 /* clock divisor */ +#define UNIPHIER_SD_CLKCTL_DIV_MASK 0x104ff +#define UNIPHIER_SD_CLKCTL_DIV1024 BIT(16) /* SDCLK = CLK / 1024 */ +#define UNIPHIER_SD_CLKCTL_DIV512 BIT(7) /* SDCLK = CLK / 512 */ +#define UNIPHIER_SD_CLKCTL_DIV256 BIT(6) /* SDCLK = CLK / 256 */ +#define UNIPHIER_SD_CLKCTL_DIV128 BIT(5) /* SDCLK = CLK / 128 */ +#define UNIPHIER_SD_CLKCTL_DIV64 BIT(4) /* SDCLK = CLK / 64 */ +#define UNIPHIER_SD_CLKCTL_DIV32 BIT(3) /* SDCLK = CLK / 32 */ +#define UNIPHIER_SD_CLKCTL_DIV16 BIT(2) /* SDCLK = CLK / 16 */ +#define UNIPHIER_SD_CLKCTL_DIV8 BIT(1) /* SDCLK = CLK / 8 */ +#define UNIPHIER_SD_CLKCTL_DIV4 BIT(0) /* SDCLK = CLK / 4 */ +#define UNIPHIER_SD_CLKCTL_DIV2 0 /* SDCLK = CLK / 2 */ +#define UNIPHIER_SD_CLKCTL_DIV1 BIT(10) /* SDCLK = CLK */ +#define UNIPHIER_SD_CLKCTL_OFFEN BIT(9) /* stop SDCLK when unused */ +#define UNIPHIER_SD_CLKCTL_SCLKEN BIT(8) /* SDCLK output enable */ +#define UNIPHIER_SD_SIZE 0x04c /* block size */ +#define UNIPHIER_SD_OPTION 0x050 +#define UNIPHIER_SD_OPTION_WIDTH_MASK (5 << 13) +#define UNIPHIER_SD_OPTION_WIDTH_1 (4 << 13) +#define UNIPHIER_SD_OPTION_WIDTH_4 (0 << 13) +#define UNIPHIER_SD_OPTION_WIDTH_8 (1 << 13) +#define UNIPHIER_SD_BUF 0x060 /* read/write buffer */ +#define UNIPHIER_SD_EXTMODE 0x1b0 +#define UNIPHIER_SD_EXTMODE_DMA_EN BIT(1) /* transfer 1: DMA, 0: pio */ +#define UNIPHIER_SD_SOFT_RST 0x1c0 +#define UNIPHIER_SD_SOFT_RST_RSTX BIT(0) /* reset deassert */ +#define UNIPHIER_SD_VERSION 0x1c4 /* version register */ +#define UNIPHIER_SD_VERSION_IP 0xff /* IP version */ +#define UNIPHIER_SD_HOST_MODE 0x1c8 +#define UNIPHIER_SD_IF_MODE 0x1cc +#define UNIPHIER_SD_IF_MODE_DDR BIT(0) /* DDR mode */ +#define UNIPHIER_SD_VOLT 0x1e4 /* voltage switch */ +#define UNIPHIER_SD_VOLT_MASK (3 << 0) +#define UNIPHIER_SD_VOLT_OFF (0 << 0) +#define UNIPHIER_SD_VOLT_330 (1 << 0)/* 3.3V signal */ +#define UNIPHIER_SD_VOLT_180 (2 << 0)/* 1.8V signal */ +#define UNIPHIER_SD_DMA_MODE 0x410 +#define UNIPHIER_SD_DMA_MODE_DIR_RD BIT(16) /* 1: from device, 0: to dev */ +#define UNIPHIER_SD_DMA_MODE_ADDR_INC BIT(0) /* 1: address inc, 0: fixed */ +#define UNIPHIER_SD_DMA_CTL 0x414 +#define UNIPHIER_SD_DMA_CTL_START BIT(0) /* start DMA (auto cleared) */ +#define UNIPHIER_SD_DMA_RST 0x418 +#define UNIPHIER_SD_DMA_RST_RD BIT(9) +#define UNIPHIER_SD_DMA_RST_WR BIT(8) +#define UNIPHIER_SD_DMA_INFO1 0x420 +#define UNIPHIER_SD_DMA_INFO1_END_RD2 BIT(20) /* DMA from device is complete*/ +#define UNIPHIER_SD_DMA_INFO1_END_RD BIT(17) /* Don't use! Hardware bug */ +#define UNIPHIER_SD_DMA_INFO1_END_WR BIT(16) /* DMA to device is complete */ +#define UNIPHIER_SD_DMA_INFO1_MASK 0x424 +#define UNIPHIER_SD_DMA_INFO2 0x428 +#define UNIPHIER_SD_DMA_INFO2_ERR_RD BIT(17) +#define UNIPHIER_SD_DMA_INFO2_ERR_WR BIT(16) +#define UNIPHIER_SD_DMA_INFO2_MASK 0x42c +#define UNIPHIER_SD_DMA_ADDR_L 0x440 +#define UNIPHIER_SD_DMA_ADDR_H 0x444 + +/* alignment required by the DMA engine of this controller */ +#define UNIPHIER_SD_DMA_MINALIGN 0x10 + +struct uniphier_sd_priv { + struct mmc_config cfg; + struct mmc *mmc; + struct udevice *dev; + void __iomem *regbase; + unsigned long mclk; + unsigned int version; + u32 caps; +#define UNIPHIER_SD_CAP_NONREMOVABLE BIT(0) /* Nonremovable e.g. eMMC */ +#define UNIPHIER_SD_CAP_DMA_INTERNAL BIT(1) /* have internal DMA engine */ +#define UNIPHIER_SD_CAP_DIV1024 BIT(2) /* divisor 1024 is available */ +}; + +static dma_addr_t __dma_map_single(void *ptr, size_t size, + enum dma_data_direction dir) +{ + unsigned long addr = (unsigned long)ptr; + + if (dir == DMA_FROM_DEVICE) + invalidate_dcache_range(addr, addr + size); + else + flush_dcache_range(addr, addr + size); + + return addr; +} + +static void __dma_unmap_single(dma_addr_t addr, size_t size, + enum dma_data_direction dir) +{ + if (dir != DMA_TO_DEVICE) + invalidate_dcache_range(addr, addr + size); +} + +static int uniphier_sd_check_error(struct uniphier_sd_priv *priv) +{ + u32 info2 = readl(priv->regbase + UNIPHIER_SD_INFO2); + + if (info2 & UNIPHIER_SD_INFO2_ERR_RTO) { + /* + * TIMEOUT must be returned for unsupported command. Do not + * display error log since this might be a part of sequence to + * distinguish between SD and MMC. + */ + return TIMEOUT; + } + + if (info2 & UNIPHIER_SD_INFO2_ERR_TO) { + dev_err(priv->dev, "timeout error\n"); + return -ETIMEDOUT; + } + + if (info2 & (UNIPHIER_SD_INFO2_ERR_END | UNIPHIER_SD_INFO2_ERR_CRC | + UNIPHIER_SD_INFO2_ERR_IDX)) { + dev_err(priv->dev, "communication out of sync\n"); + return -EILSEQ; + } + + if (info2 & (UNIPHIER_SD_INFO2_ERR_ILA | UNIPHIER_SD_INFO2_ERR_ILR | + UNIPHIER_SD_INFO2_ERR_ILW)) { + dev_err(priv->dev, "illegal access\n"); + return -EIO; + } + + return 0; +} + +static int uniphier_sd_wait_for_irq(struct uniphier_sd_priv *priv, + unsigned int reg, u32 flag) +{ + long wait = 1000000; + int ret; + + while (!(readl(priv->regbase + reg) & flag)) { + if (wait-- < 0) { + dev_err(priv->dev, "timeout\n"); + return -ETIMEDOUT; + } + + ret = uniphier_sd_check_error(priv); + if (ret) + return ret; + + udelay(1); + } + + return 0; +} + +static int uniphier_sd_pio_read_one_block(struct mmc *mmc, u32 **pbuf, + uint blocksize) +{ + struct uniphier_sd_priv *priv = mmc->priv; + int i, ret; + + /* wait until the buffer is filled with data */ + ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO2, + UNIPHIER_SD_INFO2_BRE); + if (ret) + return ret; + + /* + * Clear the status flag _before_ read the buffer out because + * UNIPHIER_SD_INFO2_BRE is edge-triggered, not level-triggered. + */ + writel(0, priv->regbase + UNIPHIER_SD_INFO2); + + if (likely(IS_ALIGNED((unsigned long)*pbuf, 4))) { + for (i = 0; i < blocksize / 4; i++) + *(*pbuf)++ = readl(priv->regbase + UNIPHIER_SD_BUF); + } else { + for (i = 0; i < blocksize / 4; i++) + put_unaligned(readl(priv->regbase + UNIPHIER_SD_BUF), + (*pbuf)++); + } + + return 0; +} + +static int uniphier_sd_pio_write_one_block(struct mmc *mmc, const u32 **pbuf, + uint blocksize) +{ + struct uniphier_sd_priv *priv = mmc->priv; + int i, ret; + + /* wait until the buffer becomes empty */ + ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO2, + UNIPHIER_SD_INFO2_BWE); + if (ret) + return ret; + + writel(0, priv->regbase + UNIPHIER_SD_INFO2); + + if (likely(IS_ALIGNED((unsigned long)*pbuf, 4))) { + for (i = 0; i < blocksize / 4; i++) + writel(*(*pbuf)++, priv->regbase + UNIPHIER_SD_BUF); + } else { + for (i = 0; i < blocksize / 4; i++) + writel(get_unaligned((*pbuf)++), + priv->regbase + UNIPHIER_SD_BUF); + } + + return 0; +} + +static int uniphier_sd_pio_xfer(struct mmc *mmc, struct mmc_data *data) +{ + u32 *dest = (u32 *)data->dest; + const u32 *src = (const u32 *)data->src; + int i, ret; + + for (i = 0; i < data->blocks; i++) { + if (data->flags & MMC_DATA_READ) + ret = uniphier_sd_pio_read_one_block(mmc, &dest, + data->blocksize); + else + ret = uniphier_sd_pio_write_one_block(mmc, &src, + data->blocksize); + if (ret) + return ret; + } + + return 0; +} + +static void uniphier_sd_dma_start(struct uniphier_sd_priv *priv, + dma_addr_t dma_addr) +{ + u32 tmp; + + writel(0, priv->regbase + UNIPHIER_SD_DMA_INFO1); + writel(0, priv->regbase + UNIPHIER_SD_DMA_INFO2); + + /* enable DMA */ + tmp = readl(priv->regbase + UNIPHIER_SD_EXTMODE); + tmp |= UNIPHIER_SD_EXTMODE_DMA_EN; + writel(tmp, priv->regbase + UNIPHIER_SD_EXTMODE); + + writel(dma_addr & U32_MAX, priv->regbase + UNIPHIER_SD_DMA_ADDR_L); + + /* suppress the warning "right shift count >= width of type" */ + dma_addr >>= min_t(int, 32, 8 * sizeof(dma_addr)); + + writel(dma_addr & U32_MAX, priv->regbase + UNIPHIER_SD_DMA_ADDR_H); + + writel(UNIPHIER_SD_DMA_CTL_START, priv->regbase + UNIPHIER_SD_DMA_CTL); +} + +static int uniphier_sd_dma_wait_for_irq(struct uniphier_sd_priv *priv, u32 flag, + unsigned int blocks) +{ + long wait = 1000000 + 10 * blocks; + + while (!(readl(priv->regbase + UNIPHIER_SD_DMA_INFO1) & flag)) { + if (wait-- < 0) { + dev_err(priv->dev, "timeout during DMA\n"); + return -ETIMEDOUT; + } + + udelay(10); + } + + if (readl(priv->regbase + UNIPHIER_SD_DMA_INFO2)) { + dev_err(priv->dev, "error during DMA\n"); + return -EIO; + } + + return 0; +} + +static int uniphier_sd_dma_xfer(struct mmc *mmc, struct mmc_data *data) +{ + struct uniphier_sd_priv *priv = mmc->priv; + size_t len = data->blocks * data->blocksize; + void *buf; + enum dma_data_direction dir; + dma_addr_t dma_addr; + u32 poll_flag, tmp; + int ret; + + tmp = readl(priv->regbase + UNIPHIER_SD_DMA_MODE); + + if (data->flags & MMC_DATA_READ) { + buf = data->dest; + dir = DMA_FROM_DEVICE; + poll_flag = UNIPHIER_SD_DMA_INFO1_END_RD2; + tmp |= UNIPHIER_SD_DMA_MODE_DIR_RD; + } else { + buf = (void *)data->src; + dir = DMA_TO_DEVICE; + poll_flag = UNIPHIER_SD_DMA_INFO1_END_WR; + tmp &= ~UNIPHIER_SD_DMA_MODE_DIR_RD; + } + + writel(tmp, priv->regbase + UNIPHIER_SD_DMA_MODE); + + dma_addr = __dma_map_single(buf, len, dir); + + uniphier_sd_dma_start(priv, dma_addr); + + ret = uniphier_sd_dma_wait_for_irq(priv, poll_flag, data->blocks); + + __dma_unmap_single(dma_addr, len, dir); + + return ret; +} + +/* check if the address is DMA'able */ +static bool uniphier_sd_addr_is_dmaable(unsigned long addr) +{ + if (!IS_ALIGNED(addr, UNIPHIER_SD_DMA_MINALIGN)) + return false; + +#if defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARM64) && \ + defined(CONFIG_SPL_BUILD) + /* + * For UniPhier ARMv7 SoCs, the stack is allocated in the locked ways + * of L2, which is unreachable from the DMA engine. + */ + if (addr < CONFIG_SPL_STACK) + return false; +#endif + + return true; +} + +static int uniphier_sd_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct uniphier_sd_priv *priv = mmc->priv; + int ret; + u32 tmp; + + if (readl(priv->regbase + UNIPHIER_SD_INFO2) & UNIPHIER_SD_INFO2_CBSY) { + dev_err(priv->dev, "command busy\n"); + return -EBUSY; + } + + /* clear all status flags */ + writel(0, priv->regbase + UNIPHIER_SD_INFO1); + writel(0, priv->regbase + UNIPHIER_SD_INFO2); + + /* disable DMA once */ + tmp = readl(priv->regbase + UNIPHIER_SD_EXTMODE); + tmp &= ~UNIPHIER_SD_EXTMODE_DMA_EN; + writel(tmp, priv->regbase + UNIPHIER_SD_EXTMODE); + + writel(cmd->cmdarg, priv->regbase + UNIPHIER_SD_ARG); + + tmp = cmd->cmdidx; + + if (data) { + writel(data->blocksize, priv->regbase + UNIPHIER_SD_SIZE); + writel(data->blocks, priv->regbase + UNIPHIER_SD_SECCNT); + + /* Do not send CMD12 automatically */ + tmp |= UNIPHIER_SD_CMD_NOSTOP | UNIPHIER_SD_CMD_DATA; + + if (data->blocks > 1) + tmp |= UNIPHIER_SD_CMD_MULTI; + + if (data->flags & MMC_DATA_READ) + tmp |= UNIPHIER_SD_CMD_RD; + } + + /* + * Do not use the response type auto-detection on this hardware. + * CMD8, for example, has different response types on SD and eMMC, + * while this controller always assumes the response type for SD. + * Set the response type manually. + */ + switch (cmd->resp_type) { + case MMC_RSP_NONE: + tmp |= UNIPHIER_SD_CMD_RSP_NONE; + break; + case MMC_RSP_R1: + tmp |= UNIPHIER_SD_CMD_RSP_R1; + break; + case MMC_RSP_R1b: + tmp |= UNIPHIER_SD_CMD_RSP_R1B; + break; + case MMC_RSP_R2: + tmp |= UNIPHIER_SD_CMD_RSP_R2; + break; + case MMC_RSP_R3: + tmp |= UNIPHIER_SD_CMD_RSP_R3; + break; + default: + dev_err(priv->dev, "unknown response type\n"); + return -EINVAL; + } + + dev_dbg(priv->dev, "sending CMD%d (SD_CMD=%08x, SD_ARG=%08x)\n", + cmd->cmdidx, tmp, cmd->cmdarg); + writel(tmp, priv->regbase + UNIPHIER_SD_CMD); + + ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO1, + UNIPHIER_SD_INFO1_RSP); + if (ret) + return ret; + + if (cmd->resp_type & MMC_RSP_136) { + u32 rsp_127_104 = readl(priv->regbase + UNIPHIER_SD_RSP76); + u32 rsp_103_72 = readl(priv->regbase + UNIPHIER_SD_RSP54); + u32 rsp_71_40 = readl(priv->regbase + UNIPHIER_SD_RSP32); + u32 rsp_39_8 = readl(priv->regbase + UNIPHIER_SD_RSP10); + + cmd->response[0] = (rsp_127_104 & 0xffffff) << 8 | + (rsp_103_72 & 0xff); + cmd->response[1] = (rsp_103_72 & 0xffffff) << 8 | + (rsp_71_40 & 0xff); + cmd->response[2] = (rsp_71_40 & 0xffffff) << 8 | + (rsp_39_8 & 0xff); + cmd->response[3] = (rsp_39_8 & 0xffffff) << 8; + } else { + /* bit 39-8 */ + cmd->response[0] = readl(priv->regbase + UNIPHIER_SD_RSP10); + } + + if (data) { + /* use DMA if the HW supports it and the buffer is aligned */ + if (priv->caps & UNIPHIER_SD_CAP_DMA_INTERNAL && + uniphier_sd_addr_is_dmaable((long)data->src)) + ret = uniphier_sd_dma_xfer(mmc, data); + else + ret = uniphier_sd_pio_xfer(mmc, data); + + ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO1, + UNIPHIER_SD_INFO1_CMP); + if (ret) + return ret; + } + + return ret; +} + +static void uniphier_sd_set_bus_width(struct uniphier_sd_priv *priv, + struct mmc *mmc) +{ + u32 val, tmp; + + switch (mmc->bus_width) { + case 1: + val = UNIPHIER_SD_OPTION_WIDTH_1; + break; + case 4: + val = UNIPHIER_SD_OPTION_WIDTH_4; + break; + case 8: + val = UNIPHIER_SD_OPTION_WIDTH_8; + break; + default: + BUG(); + break; + } + + tmp = readl(priv->regbase + UNIPHIER_SD_OPTION); + tmp &= ~UNIPHIER_SD_OPTION_WIDTH_MASK; + tmp |= val; + writel(tmp, priv->regbase + UNIPHIER_SD_OPTION); +} + +static void uniphier_sd_set_ddr_mode(struct uniphier_sd_priv *priv, + struct mmc *mmc) +{ + u32 tmp; + + tmp = readl(priv->regbase + UNIPHIER_SD_IF_MODE); + if (mmc->ddr_mode) + tmp |= UNIPHIER_SD_IF_MODE_DDR; + else + tmp &= ~UNIPHIER_SD_IF_MODE_DDR; + writel(tmp, priv->regbase + UNIPHIER_SD_IF_MODE); +} + +static void uniphier_sd_set_clk_rate(struct uniphier_sd_priv *priv, + struct mmc *mmc) +{ + unsigned int divisor; + u32 val, tmp; + + if (!mmc->clock) + return; + + divisor = DIV_ROUND_UP(priv->mclk, mmc->clock); + + if (divisor <= 1) + val = UNIPHIER_SD_CLKCTL_DIV1; + else if (divisor <= 2) + val = UNIPHIER_SD_CLKCTL_DIV2; + else if (divisor <= 4) + val = UNIPHIER_SD_CLKCTL_DIV4; + else if (divisor <= 8) + val = UNIPHIER_SD_CLKCTL_DIV8; + else if (divisor <= 16) + val = UNIPHIER_SD_CLKCTL_DIV16; + else if (divisor <= 32) + val = UNIPHIER_SD_CLKCTL_DIV32; + else if (divisor <= 64) + val = UNIPHIER_SD_CLKCTL_DIV64; + else if (divisor <= 128) + val = UNIPHIER_SD_CLKCTL_DIV128; + else if (divisor <= 256) + val = UNIPHIER_SD_CLKCTL_DIV256; + else if (divisor <= 512 || !(priv->caps & UNIPHIER_SD_CAP_DIV1024)) + val = UNIPHIER_SD_CLKCTL_DIV512; + else + val = UNIPHIER_SD_CLKCTL_DIV1024; + + tmp = readl(priv->regbase + UNIPHIER_SD_CLKCTL); + + /* stop the clock before changing its rate to avoid a glitch signal */ + tmp &= ~UNIPHIER_SD_CLKCTL_SCLKEN; + writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL); + + tmp &= ~UNIPHIER_SD_CLKCTL_DIV_MASK; + tmp |= val | UNIPHIER_SD_CLKCTL_OFFEN; + writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL); + + tmp |= UNIPHIER_SD_CLKCTL_SCLKEN; + writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL); +} + +static void uniphier_sd_set_ios(struct mmc *mmc) +{ + struct uniphier_sd_priv *priv = mmc->priv; + + dev_dbg(priv->dev, "clock %uHz, DDRmode %d, width %u\n", + mmc->clock, mmc->ddr_mode, mmc->bus_width); + + uniphier_sd_set_bus_width(priv, mmc); + uniphier_sd_set_ddr_mode(priv, mmc); + uniphier_sd_set_clk_rate(priv, mmc); + + udelay(1000); +} + +static int uniphier_sd_init(struct mmc *mmc) +{ + struct uniphier_sd_priv *priv = mmc->priv; + u32 tmp; + + /* soft reset of the host */ + tmp = readl(priv->regbase + UNIPHIER_SD_SOFT_RST); + tmp &= ~UNIPHIER_SD_SOFT_RST_RSTX; + writel(tmp, priv->regbase + UNIPHIER_SD_SOFT_RST); + tmp |= UNIPHIER_SD_SOFT_RST_RSTX; + writel(tmp, priv->regbase + UNIPHIER_SD_SOFT_RST); + + /* FIXME: implement eMMC hw_reset */ + + writel(UNIPHIER_SD_STOP_SEC, priv->regbase + UNIPHIER_SD_STOP); + + /* + * Connected to 32bit AXI. + * This register dropped backward compatibility at version 0x10. + * Write an appropriate value depending on the IP version. + */ + writel(priv->version >= 0x10 ? 0x00000101 : 0x00000000, + priv->regbase + UNIPHIER_SD_HOST_MODE); + + if (priv->caps & UNIPHIER_SD_CAP_DMA_INTERNAL) { + tmp = readl(priv->regbase + UNIPHIER_SD_DMA_MODE); + tmp |= UNIPHIER_SD_DMA_MODE_ADDR_INC; + writel(tmp, priv->regbase + UNIPHIER_SD_DMA_MODE); + } + + return 0; +} + +static int uniphier_sd_getcd(struct mmc *mmc) +{ + struct uniphier_sd_priv *priv = mmc->priv; + + if (priv->caps & UNIPHIER_SD_CAP_NONREMOVABLE) + return 1; + + return !!(readl(priv->regbase + UNIPHIER_SD_INFO1) & + UNIPHIER_SD_INFO1_CD); +} + +static const struct mmc_ops uniphier_sd_ops = { + .send_cmd = uniphier_sd_send_cmd, + .set_ios = uniphier_sd_set_ios, + .init = uniphier_sd_init, + .getcd = uniphier_sd_getcd, +}; + +int uniphier_sd_probe(struct udevice *dev) +{ + struct uniphier_sd_priv *priv = dev_get_priv(dev); + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + fdt_addr_t base; + fdt_size_t size; + struct udevice *clk_dev; + int clk_id; + int ret; + + priv->dev = dev; + + base = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", &size); + priv->regbase = map_sysmem(base, size); + if (!priv->regbase) + return -ENOMEM; + + clk_id = clk_get_by_index(dev, 0, &clk_dev); + if (clk_id < 0) { + dev_err(dev, "failed to get host clock\n"); + return clk_id; + } + + /* set to max rate */ + priv->mclk = clk_set_periph_rate(clk_dev, clk_id, ULONG_MAX); + if (IS_ERR_VALUE(priv->mclk)) { + dev_err(dev, "failed to set rate for host clock\n"); + return priv->mclk; + } + + ret = clk_enable(clk_dev, clk_id); + if (ret) { + dev_err(dev, "failed to enable host clock\n"); + return ret; + } + + priv->cfg.name = dev->name; + priv->cfg.ops = &uniphier_sd_ops; + priv->cfg.host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS; + + switch (fdtdec_get_int(gd->fdt_blob, dev->of_offset, "bus-width", 1)) { + case 8: + priv->cfg.host_caps |= MMC_MODE_8BIT; + break; + case 4: + priv->cfg.host_caps |= MMC_MODE_4BIT; + break; + case 1: + break; + default: + dev_err(dev, "Invalid \"bus-width\" value\n"); + return -EINVAL; + } + + if (fdt_get_property(gd->fdt_blob, dev->of_offset, "non-removable", + NULL)) + priv->caps |= UNIPHIER_SD_CAP_NONREMOVABLE; + + priv->version = readl(priv->regbase + UNIPHIER_SD_VERSION) & + UNIPHIER_SD_VERSION_IP; + dev_dbg(dev, "version %x\n", priv->version); + if (priv->version >= 0x10) { + priv->caps |= UNIPHIER_SD_CAP_DMA_INTERNAL; + priv->caps |= UNIPHIER_SD_CAP_DIV1024; + } + + priv->cfg.voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34; + priv->cfg.f_min = priv->mclk / + (priv->caps & UNIPHIER_SD_CAP_DIV1024 ? 1024 : 512); + priv->cfg.f_max = priv->mclk; + priv->cfg.b_max = U32_MAX; /* max value of UNIPHIER_SD_SECCNT */ + + priv->mmc = mmc_create(&priv->cfg, priv); + if (!priv->mmc) + return -EIO; + + upriv->mmc = priv->mmc; + + return 0; +} + +int uniphier_sd_remove(struct udevice *dev) +{ + struct uniphier_sd_priv *priv = dev_get_priv(dev); + + unmap_sysmem(priv->regbase); + mmc_destroy(priv->mmc); + + return 0; +} + +static const struct udevice_id uniphier_sd_match[] = { + { .compatible = "socionext,uniphier-sdhc" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(uniphier_mmc) = { + .name = "uniphier-mmc", + .id = UCLASS_MMC, + .of_match = uniphier_sd_match, + .probe = uniphier_sd_probe, + .remove = uniphier_sd_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_sd_priv), +};