From patchwork Mon Jan 21 11:43:54 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amar X-Patchwork-Id: 14139 Return-Path: X-Original-To: patchwork@peony.canonical.com Delivered-To: patchwork@peony.canonical.com Received: from fiordland.canonical.com (fiordland.canonical.com [91.189.94.145]) by peony.canonical.com (Postfix) with ESMTP id D81B923E02 for ; Mon, 21 Jan 2013 11:28:14 +0000 (UTC) Received: from mail-vb0-f46.google.com (mail-vb0-f46.google.com [209.85.212.46]) by fiordland.canonical.com (Postfix) with ESMTP id 5AFD2A189F6 for ; Mon, 21 Jan 2013 11:28:14 +0000 (UTC) Received: by mail-vb0-f46.google.com with SMTP id b13so5603857vby.33 for ; Mon, 21 Jan 2013 03:28:13 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-received:x-forwarded-to:x-forwarded-for:delivered-to:x-received :received-spf:x-auditid:from:to:cc:subject:date:message-id:x-mailer :in-reply-to:references:x-brightmail-tracker:x-brightmail-tracker :dlp-filter:x-mtr:x-cfilter-loop:x-gm-message-state; bh=9HwwF1POXLiC7B1iW3rXs2XBzawHIpVkBP515N/SJVc=; b=HN6EDvvCi8pEsmQEbqjO/lFOXFA13vzLfMkU0G8U1l55nVidTrcXN7VkB2b/m/dXly 1qLQPKeg5k/s9aiHWMdmQPjRmX56/P8YsDK9fjAbYUxlczj9d1NRQMDqiGeA1/T5RcKh AtWGwZQrR4tKRULpFlg/4krH9wc/zp9sDmCKYAFhXRV1lhZFgjipca6EiiV5RE7muopO 4AKEEalKU8P0hpA16yIpVxNODEDa4kZTZahXeeNMT8CbnZ46yyDWNGKzjZtiylfOPekz nJlwdx9JzrzcOGlX5ZwndAnb9Hkd9vFSM+HntqUdIF1RouNQckB4Sy5yEJSBExbAW3m9 gtmQ== X-Received: by 10.52.34.108 with SMTP id y12mr12554098vdi.8.1358767693866; Mon, 21 Jan 2013 03:28:13 -0800 (PST) X-Forwarded-To: linaro-patchwork@canonical.com X-Forwarded-For: patch@linaro.org linaro-patchwork@canonical.com Delivered-To: patches@linaro.org Received: by 10.58.145.101 with SMTP id st5csp196466veb; Mon, 21 Jan 2013 03:28:13 -0800 (PST) X-Received: by 10.66.85.101 with SMTP id g5mr46409428paz.17.1358767692368; Mon, 21 Jan 2013 03:28:12 -0800 (PST) Received: from mailout1.samsung.com (mailout1.samsung.com. [203.254.224.24]) by mx.google.com with ESMTP id bf6si13803877pab.54.2013.01.21.03.28.11; Mon, 21 Jan 2013 03:28:12 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of amarendra.xt@samsung.com designates 203.254.224.24 as permitted sender) client-ip=203.254.224.24; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of amarendra.xt@samsung.com designates 203.254.224.24 as permitted sender) smtp.mail=amarendra.xt@samsung.com Received: from epcpsbgm2.samsung.com (epcpsbgm2 [203.254.230.27]) by mailout1.samsung.com (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTP id <0MGZ00BHZ3UWRDP0@mailout1.samsung.com>; Mon, 21 Jan 2013 20:28:11 +0900 (KST) Received: from epcpsbgm2.samsung.com ( [172.20.52.126]) by epcpsbgm2.samsung.com (EPCPMTA) with SMTP id DE.8E.03880.A462DF05; Mon, 21 Jan 2013 20:28:10 +0900 (KST) X-AuditID: cbfee61b-b7fb06d000000f28-fa-50fd264aa5ca Received: from epmmp2 ( [203.254.227.17]) by epcpsbgm2.samsung.com (EPCPMTA) with SMTP id 5E.8E.03880.A462DF05; Mon, 21 Jan 2013 20:28:10 +0900 (KST) Received: from chrome-ubuntu.sisodomain.com ([107.108.73.106]) by mmp2.samsung.com (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTPA id <0MGZ0092C3L1A540@mmp2.samsung.com>; Mon, 21 Jan 2013 20:28:10 +0900 (KST) From: Amar To: u-boot@lists.denx.de, jh80.chung@samsung.com Cc: patches@linaro.org, sjg@chromium.org, mk7.kang@samsung.com, chander.kashyap@linaro.org, afleming@gmail.com, hs@denx.de Subject: [PATCH V5 06/10] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT Date: Mon, 21 Jan 2013 06:43:54 -0500 Message-id: <1358768638-14187-7-git-send-email-amarendra.xt@samsung.com> X-Mailer: git-send-email 1.8.0 In-reply-to: <1358768638-14187-1-git-send-email-amarendra.xt@samsung.com> References: <1358768638-14187-1-git-send-email-amarendra.xt@samsung.com> X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFvrBLMWRmVeSWpSXmKPExsWyRsSkTtdL7W+AwZzLNhYP199ksZhy+AuL A5PHnWt72AIYo7hsUlJzMstSi/TtErgy1n1bzlJwuKbi/+PZjA2MbSldjJwcEgImEk9e/mWF sMUkLtxbz9bFyMUhJLCUUaJp1jN2mKLWea3sEInpjBK7fs5mgnB6mSQut28HauHgYBNQlfi1 2B6kQUTAQGL6k+1gU5kFaiQmz7/FBGILC0RJvHr7HsxmASrfcH0CM4jNK+AhcXPlJTaIZXIS H/Y8AlvMKeApsf/vHrA5QkA1uxb8ZwXZKyFwm01i5dmHbBCDBCS+TT7EAnKDhICsxKYDzBBz JCUOrrjBMoFReAEjwypG0dSC5ILipPRcI73ixNzi0rx0veT83E2MwHA8/e+Z9A7GVQ0WhxgF OBiVeHgT+v4ECLEmlhVX5h5ilOBgVhLh/TkDKMSbklhZlVqUH19UmpNafIgxGWj5RGYp0eR8 YKzklcQbGpuYmxqbWhoZmZmakiasJM7LeOpJgJBAemJJanZqakFqEcwWJg5OqQZGve5DNyt4 qrTi15QfeyvzqktqmU7jxCKT1lJfq6aA3XqV1/9dveesZJql7S0ZE5t9lL0zfM+WezZSJ59X 3sq429E9if/ndbH90auXdYZn5z9WP6TY5cd4xIzde+PpsAMN6Zny5v84GmUXT5z4O9JeP0J7 sYhgV2b74TQJw+P3Xsm+7X767b4SS3FGoqEWc1FxIgA4825ziwIAAA== X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFlrOIsWRmVeSWpSXmKPExsVy+t9jQV0vtb8BBmuu61g8XH+TxWLK4S8s Dkwed67tYQtgjGpgtMlITUxJLVJIzUvOT8nMS7dV8g6Od443NTMw1DW0tDBXUshLzE21VXLx CdB1y8wBmq2kUJaYUwoUCkgsLlbSt8M0ITTETdcCpjFC1zckCK7HyAANJKxhzFj3bTlLweGa iv+PZzM2MLaldDFyckgImEi0zmtlh7DFJC7cW8/WxcjFISQwnVFi18/ZTBBOL5PE5fbtQBkO DjYBVYlfi+1BGkQEDCSmP9nOCmIzC9RITJ5/iwnEFhaIknj19j2YzQJUvuH6BGYQm1fAQ+Lm yktsEMvkJD7seQS2mFPAU2L/3z1gc4SAanYt+M86gZF3ASPDKkbR1ILkguKk9FwjveLE3OLS vHS95PzcTYzgYH8mvYNxVYPFIUYBDkYlHt6Evj8BQqyJZcWVuYcYJTiYlUR4f84ACvGmJFZW pRblxxeV5qQWH2JMBrpqIrOUaHI+MBLzSuINjU3MTY1NLU0sTMwsSRNWEudlPPUkQEggPbEk NTs1tSC1CGYLEwenVANjy/KSmKtqrelnTzrIc3z2EdB78pCv5MZGXe4/ek5WN0ojLE9VpHcH CZdy287/8Vt6w+O97oo9NzL49y+f2eQmYxb9SLva+ojBhJ7zLAGxBkF1+xhm9Z24oSPbymQ3 MStsU1Txtv1TPtR9F5h361ARr8v/SX5fii3018TdqWBIvxDm312j5qPEUpyRaKjFXFScCAAo cKf1ugIAAA== DLP-Filter: Pass X-MTR: 20000000000000000@CPGS X-CFilter-Loop: Reflected X-Gm-Message-State: ALoCoQk7J6iwhvRkJvZ5yg5Ap9zpODTq7nEjOIrBIHIXuJ8a1fFEDGKVBSnuAwa0YWb/O7TkppZq This patch enables and initialises DWMMC for SMDK5250. Supports both FDT and non-FDT. This patch creates a new file 'exynos5-dt.c' meant for FDT support. exynos5-dt.c: This file shall contain all code which supports FDT. Any addition of FDT support for any module needs to be added in this file. smdk5250.c: This file shall contain the code which supports non-FDT. version. Any addition of non-FDT support for any module needs to be added in this file. May be, the file smdk5250.c can be removed in near future when non-FDT is not required. The Makefile is updated to compile only one of the files exynos5-dt.c / smdk5250.c based on FDT configuration. NOTE: Please note that all additions corresponding to FDT need to be added into the file exynos5-dt.c. At same time if non-FDT support is required then add the corresponding updations into smdk5250.c. Signed-off-by: Amar Acked-by: Simon Glass --- Changes since V1: 1)A new file 'exynos5-dt.c' is created meant for FDT support 2)Makefile is updated to compile only one of the files exynos5-dt.c / smdk5250.c based on FDT configuration Changes since V2: 1)Updation of commit message and resubmition of proper patch set. Changes since V3: No change. Changes since V4: 1)Replaced the function call 'exynos_dwmmc_init(0, 8);' with the function exynos_dwmmc_add_port() in smdk5250.c. 2)dram_init() is updated to use for loop to compute the ram size. 3)dram_init_banksize() is updated to use for loop to initialise the dram bank size. 4)board_uart_init() is updated to use for loop to initialise UARTS. 5)In non-FDT case NULL is passed as parameter to board_i2c_init(). board/samsung/smdk5250/Makefile | 4 + board/samsung/smdk5250/exynos5-dt.c | 211 ++++++++++++++++++++++++++++++++++++ board/samsung/smdk5250/smdk5250.c | 170 ++++++++++------------------- include/configs/exynos5250-dt.h | 6 + 4 files changed, 279 insertions(+), 112 deletions(-) create mode 100644 board/samsung/smdk5250/exynos5-dt.c diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile index 47c6a5a..ecca9f3 100644 --- a/board/samsung/smdk5250/Makefile +++ b/board/samsung/smdk5250/Makefile @@ -32,8 +32,12 @@ COBJS += tzpc_init.o COBJS += smdk5250_spl.o ifndef CONFIG_SPL_BUILD +ifdef CONFIG_OF_CONTROL +COBJS += exynos5-dt.o +else COBJS += smdk5250.o endif +endif ifdef CONFIG_SPL_BUILD COBJS += spl_boot.o diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c new file mode 100644 index 0000000..a4b0e10 --- /dev/null +++ b/board/samsung/smdk5250/exynos5-dt.c @@ -0,0 +1,211 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); +#ifdef CONFIG_EXYNOS_SPI + spi_init(); +#endif + return 0; +} + +int dram_init(void) +{ + int i; + u32 addr; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE); + gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE); + } + return 0; +} + +#if defined(CONFIG_POWER) +int power_init_board(void) +{ + if (pmic_init(I2C_PMIC)) { + debug("Could not initialise PMIC\n"); + return -1; + } else + return 0; +} +#endif + +void dram_init_banksize(void) +{ + int i; + u32 addr, size; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE); + size = get_ram_size((long *)addr, SDRAM_BANK_SIZE); + + gd->bd->bi_dram[i].start = addr; + gd->bd->bi_dram[i].size = size; + } +} + +static int decode_sromc(const void *blob, struct fdt_sromc *config) +{ + int err; + int node; + + node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC); + if (node < 0) { + debug("Could not find SROMC node\n"); + return node; + } + + config->bank = fdtdec_get_int(blob, node, "bank", 0); + config->width = fdtdec_get_int(blob, node, "width", 2); + + err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing, + FDT_SROM_TIMING_COUNT); + if (err < 0) { + debug("Could not decode SROMC configuration" + "Error: %s\n", fdt_strerror(err)); + return -FDT_ERR_NOTFOUND; + } + return 0; +} + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_SMC911X + u32 smc_bw_conf, smc_bc_conf; + struct fdt_sromc config; + fdt_addr_t base_addr; + int node; + + node = decode_sromc(gd->fdt_blob, &config); + if (node < 0) { + debug("%s: Could not find sromc configuration\n", __func__); + return 0; + } + node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215); + if (node < 0) { + debug("%s: Could not find lan9215 configuration\n", __func__); + return 0; + } + + /* We now have a node, so any problems from now on are errors */ + base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg"); + if (base_addr == FDT_ADDR_T_NONE) { + debug("%s: Could not find lan9215 address\n", __func__); + return -1; + } + + /* Ethernet needs data bus width of 16 bits */ + if (config.width != 2) { + debug("%s: Unsupported bus width %d\n", __func__, + config.width); + return -1; + } + smc_bw_conf = SROMC_DATA16_WIDTH(config.bank) + | SROMC_BYTE_ENABLE(config.bank); + + smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) | + SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) | + SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) | + SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) | + SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) | + SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) | + SROMC_BC_PMC(config.timing[FDT_SROM_PMC]); + + /* Select and configure the SROMC bank */ + exynos_pinmux_config(PERIPH_ID_SROMC, config.bank); + s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf); + return smc911x_initialize(0, base_addr); +#endif + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("\nBoard: SMDK5250\n"); + + return 0; +} +#endif + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + int ret; + /* dwmmc initializattion for available channels */ + ret = exynos_dwmmc_init(gd->fdt_blob); + if (ret) + debug("dwmmc init failed\n"); + + return ret; +} +#endif + +static int board_uart_init(void) +{ + int err, uart_id, ret = 0; + + for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) { + err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE); + if (err) { + debug("UART%d not configured\n", + (uart_id - PERIPH_ID_UART0)); + ret |= err; + } + } + return ret; +} + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ + int err; + err = board_uart_init(); + if (err) { + debug("UART init failed\n"); + return err; + } +#ifdef CONFIG_SYS_I2C_INIT_BOARD + board_i2c_init(gd->fdt_blob); +#endif + return err; +} +#endif diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 7a5f132..e3a2593 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -68,80 +69,40 @@ int board_init(void) int dram_init(void) { - gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) - + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) - + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) - + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE) - + get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE) - + get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE) - + get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE) - + get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE); + int i; + u32 addr; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE); + gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE); + } return 0; } #if defined(CONFIG_POWER) int power_init_board(void) { - if (pmic_init(I2C_PMIC)) + if (pmic_init(I2C_PMIC)) { + debug("Could not initialise PMIC\n"); return -1; - else + } else return 0; } #endif void dram_init_banksize(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, - PHYS_SDRAM_2_SIZE); - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, - PHYS_SDRAM_3_SIZE); - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, - PHYS_SDRAM_4_SIZE); - gd->bd->bi_dram[4].start = PHYS_SDRAM_5; - gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5, - PHYS_SDRAM_5_SIZE); - gd->bd->bi_dram[5].start = PHYS_SDRAM_6; - gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6, - PHYS_SDRAM_6_SIZE); - gd->bd->bi_dram[6].start = PHYS_SDRAM_7; - gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7, - PHYS_SDRAM_7_SIZE); - gd->bd->bi_dram[7].start = PHYS_SDRAM_8; - gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8, - PHYS_SDRAM_8_SIZE); -} + int i; + u32 addr, size; -#ifdef CONFIG_OF_CONTROL -static int decode_sromc(const void *blob, struct fdt_sromc *config) -{ - int err; - int node; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE); + size = get_ram_size((long *)addr, SDRAM_BANK_SIZE); - node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC); - if (node < 0) { - debug("Could not find SROMC node\n"); - return node; + gd->bd->bi_dram[i].start = addr; + gd->bd->bi_dram[i].size = size; } - - config->bank = fdtdec_get_int(blob, node, "bank", 0); - config->width = fdtdec_get_int(blob, node, "width", 2); - - err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing, - FDT_SROM_TIMING_COUNT); - if (err < 0) { - debug("Could not decode SROMC configuration\n"); - return -FDT_ERR_NOTFOUND; - } - - return 0; } -#endif int board_eth_init(bd_t *bis) { @@ -149,27 +110,7 @@ int board_eth_init(bd_t *bis) u32 smc_bw_conf, smc_bc_conf; struct fdt_sromc config; fdt_addr_t base_addr; - int node; -#ifdef CONFIG_OF_CONTROL - node = decode_sromc(gd->fdt_blob, &config); - if (node < 0) { - debug("%s: Could not find sromc configuration\n", __func__); - return 0; - } - node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215); - if (node < 0) { - debug("%s: Could not find lan9215 configuration\n", __func__); - return 0; - } - - /* We now have a node, so any problems from now on are errors */ - base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg"); - if (base_addr == FDT_ADDR_T_NONE) { - debug("%s: Could not find lan9215 address\n", __func__); - return -1; - } -#else /* Non-FDT configuration - bank number and timing parameters*/ config.bank = CONFIG_ENV_SROM_BANK; config.width = 2; @@ -182,7 +123,6 @@ int board_eth_init(bd_t *bis) config.timing[FDT_SROM_TACP] = 0x09; config.timing[FDT_SROM_PMC] = 0x01; base_addr = CONFIG_SMC911X_BASE; -#endif /* Ethernet needs data bus width of 16 bits */ if (config.width != 2) { @@ -221,48 +161,54 @@ int checkboard(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - int err; + int err, ret = 0, index, bus_width; + u32 base; err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); - if (err) { + if (err) debug("SDMMC0 not configured\n"); - return err; - } - - err = s5p_mmc_init(0, 8); - return err; + ret |= err; + + /*EMMC: dwmmc Channel-0 with 8 bit bus width */ + index = 0; + base = samsung_get_base_mmc() + (0x10000 * index); + bus_width = 8; + err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL); + if (err) + debug("dwmmc Channel-0 init failed\n"); + ret |= err; + + err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); + if (err) + debug("SDMMC2 not configured\n"); + ret |= err; + + /*SD: dwmmc Channel-2 with 4 bit bus width */ + index = 2; + base = samsung_get_base_mmc() + (0x10000 * index); + bus_width = 4; + err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL); + if (err) + debug("dwmmc Channel-2 init failed\n"); + ret |= err; + + return ret; } #endif static int board_uart_init(void) { - int err; - - err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE); - if (err) { - debug("UART0 not configured\n"); - return err; - } - - err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE); - if (err) { - debug("UART1 not configured\n"); - return err; + int err, uart_id, ret = 0; + + for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) { + err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE); + if (err) { + debug("UART%d not configured\n", + (uart_id - PERIPH_ID_UART0)); + ret |= err; + } } - - err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE); - if (err) { - debug("UART2 not configured\n"); - return err; - } - - err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE); - if (err) { - debug("UART3 not configured\n"); - return err; - } - - return 0; + return ret; } #ifdef CONFIG_BOARD_EARLY_INIT_F @@ -275,7 +221,7 @@ int board_early_init_f(void) return err; } #ifdef CONFIG_SYS_I2C_INIT_BOARD - board_i2c_init(gd->fdt_blob); + board_i2c_init(NULL); #endif return err; } diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index cabd2f2..3fa86b2 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -95,6 +95,8 @@ #define CONFIG_MMC #define CONFIG_SDHCI #define CONFIG_S5P_SDHCI +#define CONFIG_DWMMC +#define CONFIG_EXYNOS_DWMMC #define CONFIG_BOARD_EARLY_INIT_F @@ -210,6 +212,10 @@ #define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_PART +#define CONFIG_PARTITION_UUIDS + #define CONFIG_IRAM_STACK 0x02050000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)