From patchwork Tue Jul 24 07:23:53 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rajeshwari Shinde X-Patchwork-Id: 10218 Return-Path: X-Original-To: patchwork@peony.canonical.com Delivered-To: patchwork@peony.canonical.com Received: from fiordland.canonical.com (fiordland.canonical.com [91.189.94.145]) by peony.canonical.com (Postfix) with ESMTP id 211F823E56 for ; Tue, 24 Jul 2012 07:18:20 +0000 (UTC) Received: from mail-gg0-f180.google.com (mail-gg0-f180.google.com [209.85.161.180]) by fiordland.canonical.com (Postfix) with ESMTP id CE9C0A180D6 for ; Tue, 24 Jul 2012 07:18:19 +0000 (UTC) Received: by mail-gg0-f180.google.com with SMTP id f1so6653535ggn.11 for ; Tue, 24 Jul 2012 00:18:19 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-forwarded-to:x-forwarded-for:delivered-to:received-spf:x-auditid :from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references :x-brightmail-tracker:x-tm-as-mml:x-gm-message-state; bh=fQ4kkfXLrTfZ63SN9P4G2I6PA3avWu8cBYKx/8vj57Q=; b=AeI+/oa9Oe7//FvTTBzbCmxBIkXeso+6UQGxrCRbVEWR2sV+sJKKhSv8eNPRpUy+3Y kQcT0j7OqfBW+LBiV7vMJGoc6ILjbXUvRGT66USY/s/8BRcgGRpy7iB7D1eF9cJ3Bd/j WiAdAwKpY6L21IQlii1wvpg2rMRt7rGjSIgmg//TnLcWSvkAf4/mLzXe5lC3Q/ycTE1I lzqVMvh2tXpOypmrbl4rrihzqnP4dux/SkHMlClAH6pUCLrN1FMgGAzgUiCVCi5UzT1d 6oxtWNQaS0nYHVVsAtNTb+EukLKYipJivbnXYaDTFNaufjQ0U+P1EfiDj22Uobh/FjWl DfYQ== Received: by 10.42.155.200 with SMTP id v8mr12838246icw.12.1343114299000; Tue, 24 Jul 2012 00:18:19 -0700 (PDT) X-Forwarded-To: linaro-patchwork@canonical.com X-Forwarded-For: patch@linaro.org linaro-patchwork@canonical.com Delivered-To: patches@linaro.org Received: by 10.231.153.7 with SMTP id i7csp67685ibw; Tue, 24 Jul 2012 00:18:18 -0700 (PDT) Received: by 10.68.134.161 with SMTP id pl1mr42125252pbb.29.1343114297929; Tue, 24 Jul 2012 00:18:17 -0700 (PDT) Received: from mailout3.samsung.com (mailout3.samsung.com. [203.254.224.33]) by mx.google.com with ESMTP id ot3si27017763pbc.131.2012.07.24.00.18.17; Tue, 24 Jul 2012 00:18:17 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of rajeshwari.s@samsung.com designates 203.254.224.33 as permitted sender) client-ip=203.254.224.33; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of rajeshwari.s@samsung.com designates 203.254.224.33 as permitted sender) smtp.mail=rajeshwari.s@samsung.com Received: from epcpsbgm2.samsung.com (mailout3.samsung.com [203.254.224.33]) by mailout3.samsung.com (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTP id <0M7N008X4LLXDOA0@mailout3.samsung.com>; Tue, 24 Jul 2012 16:18:16 +0900 (KST) X-AuditID: cbfee61b-b7f566d000005c8a-46-500e4c380d27 Received: from epmmp1.local.host ( [203.254.227.16]) by epcpsbgm2.samsung.com (EPCPMTA) with SMTP id 4D.46.23690.83C4E005; Tue, 24 Jul 2012 16:18:16 +0900 (KST) Received: from rajeshwari-linux.sisodomain.com ([107.108.215.115]) by mmp1.samsung.com (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTPA id <0M7N0070ELLVCSJ1@mmp1.samsung.com>; Tue, 24 Jul 2012 16:18:16 +0900 (KST) From: Rajeshwari Shinde To: u-boot@lists.denx.de Cc: patches@linaro.org, alim.akhtar@samsung.com, sjg@chromium.org, hs@denx.de, mk7.kang@samsung.com, chander.kashyap@linaro.org, jy0922.shim@samsung.com, jh80.chung@samsung.com Subject: [PATCH 6/8 V7] I2C: Modify the I2C driver for EXYNOS5 Date: Tue, 24 Jul 2012 12:53:53 +0530 Message-id: <1343114635-28169-7-git-send-email-rajeshwari.s@samsung.com> X-Mailer: git-send-email 1.7.4.4 In-reply-to: <1343114635-28169-1-git-send-email-rajeshwari.s@samsung.com> References: <1343114635-28169-1-git-send-email-rajeshwari.s@samsung.com> X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFnrOJMWRmVeSWpSXmKPExsVy+t9jAV0LH74Agw/LxS0err/JYjHl8BcW ByaPO9f2sAUwRnHZpKTmZJalFunbJXBlzF1fUHAqs2LCq9QGxuUBXYycHBICJhJrOl6wQ9hi EhfurWfrYuTiEBJYxCixpe8BI4QzkUmieetiZpAqNgEjia0npzGC2CICEhK/+q+CFTELbGGU OP7qIhtIQljATuLpndVgDSwCqhJ/590Ei/MKeEh0bZ/DBrFOQeLY1K+sIDangKfExutbmUBs IaCap3dOsU5g5F3AyLCKUTS1ILmgOCk910ivODG3uDQvXS85P3cTI9j7z6R3MK5qsDjEKMDB qMTDK9HFGyDEmlhWXJl7iFGCg1lJhJfXgy9AiDclsbIqtSg/vqg0J7X4EKM0B4uSOK+J91d/ IYH0xJLU7NTUgtQimCwTB6dUA2P9vxutu7+uesPfH3dlyQOFnAuh8b9Ed/VvC21fE7B5w6cD Tzw3Xn+yb5/1jR+sTywt/+o7PeMuiny9cdnR6IXSJtNdF4R9e2Vxrmzx+yJ/mXeRl2QOCU76 w58rcnTm0sgV2jtfH8nT/7IrcfeW+G67Fb9niLBveHv+rW/ftLOpJ54uZ5f28Nnop8RSnJFo qMVcVJwIAFKkdX76AQAA X-TM-AS-MML: No X-Gm-Message-State: ALoCoQlitu+o2yjWCGyusQ9FOxwTN0Dl0TmbkpMMo1mzZCWFtpu8MLRO7TwiFpKqLhSZvRdz0/Eu This patch modifies the S3C I2C driver to suppport EXYNOS5. The cahnges made to driver are as follows: - I2C base address is passed as a parameter to many functions to avoid multiple #ifdef - Channel initialisation is moved to a commom funation as it is required by i2c_init. - Hardcoding for I2CCON_ACKGEN removed. - Replaced printf with debug. - Checkpatch issues resolved. - Pinmux setting will be done in board/samsung/smdk5250/smdk5250.c to avoid repeated setting of gpio lines, as it have multi bus support. Signed-off-by: Alim Akhtar Signed-off-by: Doug Anderson Signed-off-by: Rajeshwari Shinde Acked-by: Simon Glass --- Changes in V2: - Removed #define for I2C cahnnels from hearder file except for I2C0. - Incorporated review comments from Simon Glass. Changes in V3: - Incorporated review comments from Joonyoung Shim. - Reduced the number of #ifdef by modifying get_i2c_base function. - Removed duplicate code. Changes in V4: - Resolved build error for s3c2410. Changes in V5: - Pinmux setting will be done in board/samsung/smdk5250/smdk5250.c to avoid repeated setting of gpio lines, as it have multi bus support. - I2C bus offset calulation done based on EXYNOS_I2C_SPACING - Peripharal related code removed. Changes in V6: - g_current_bus made common to all platforms. Changes in V7: - moved get_base_i2c after initialising g_current_bus to 0. - Corrected && to & when waiting for previous transfer to finish in i2c_init. - i2c_ch_init uses the arguments passed in i2c_init. drivers/i2c/s3c24x0_i2c.c | 194 +++++++++++++++++++++++++++------------------ 1 files changed, 117 insertions(+), 77 deletions(-) diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index ba6f39b..26c0755 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -27,10 +27,15 @@ */ #include +#ifdef CONFIG_EXYNOS5 +#include +#include +#else #include - +#endif #include #include +#include "s3c24x0_i2c.h" #ifdef CONFIG_HARD_I2C @@ -45,6 +50,7 @@ #define I2CSTAT_BSY 0x20 /* Busy bit */ #define I2CSTAT_NACK 0x01 /* Nack bit */ +#define I2CCON_ACKGEN 0x80 /* Acknowledge generation */ #define I2CCON_IRPND 0x10 /* Interrupt pending bit */ #define I2C_MODE_MT 0xC0 /* Master Transmit Mode */ #define I2C_MODE_MR 0x80 /* Master Receive Mode */ @@ -53,6 +59,10 @@ #define I2C_TIMEOUT 1 /* 1 second */ + +static unsigned int g_current_bus; /* Stores Current I2C Bus */ + +#ifndef CONFIG_EXYNOS5 static int GetI2CSDA(void) { struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); @@ -77,16 +87,17 @@ static void SetI2CSCL(int x) struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); #ifdef CONFIG_S3C2410 - writel((readl(&gpio->gpedat) & ~0x4000) | (x & 1) << 14, &gpio->gpedat); + writel((readl(&gpio->gpedat) & ~0x4000) | + (x & 1) << 14, &gpio->gpedat); #endif #ifdef CONFIG_S3C2400 writel((readl(&gpio->pgdat) & ~0x0040) | (x & 1) << 6, &gpio->pgdat); #endif } +#endif -static int WaitForXfer(void) +static int WaitForXfer(struct s3c24x0_i2c *i2c) { - struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); int i; i = I2C_TIMEOUT * 10000; @@ -98,35 +109,75 @@ static int WaitForXfer(void) return (readl(&i2c->iiccon) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT; } -static int IsACK(void) +static int IsACK(struct s3c24x0_i2c *i2c) { - struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); - return !(readl(&i2c->iicstat) & I2CSTAT_NACK); } -static void ReadWriteByte(void) +static void ReadWriteByte(struct s3c24x0_i2c *i2c) { - struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); - writel(readl(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon); } +static struct s3c24x0_i2c *get_base_i2c(void) +{ +#ifdef CONFIG_EXYNOS5 + struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c() + + (EXYNOS5_I2C_SPACING + * g_current_bus)); + return i2c; +#else + return s3c24x0_get_base_i2c(); +#endif +} + +static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd) +{ + ulong freq, pres = 16, div; +#ifdef CONFIG_EXYNOS5 + freq = get_i2c_clk(); +#else + freq = get_PCLK(); +#endif + /* calculate prescaler and divisor values */ + if ((freq / pres / (16 + 1)) > speed) + /* set prescaler to 512 */ + pres = 512; + + div = 0; + while ((freq / pres / (div + 1)) > speed) + div++; + + /* set prescaler, divisor according to freq, also set ACKGEN, IRQ */ + writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->iiccon); + + /* init to SLAVE REVEIVE and set slaveaddr */ + writel(0, &i2c->iicstat); + writel(slaveadd, &i2c->iicadd); + /* program Master Transmit (and implicit STOP) */ + writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); +} + void i2c_init(int speed, int slaveadd) { - struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); + struct s3c24x0_i2c *i2c; +#ifndef CONFIG_EXYNOS5 struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); - ulong freq, pres = 16, div; +#endif int i; - /* wait for some time to give previous transfer a chance to finish */ + /* By default i2c channel 0 is the current bus */ + g_current_bus = 0; + i2c = get_base_i2c(); + /* wait for some time to give previous transfer a chance to finish */ i = I2C_TIMEOUT * 1000; - while ((readl(&i2c->iicstat) && I2CSTAT_BSY) && (i > 0)) { + while ((readl(&i2c->iicstat) & I2CSTAT_BSY) && (i > 0)) { udelay(1000); i--; } +#ifndef CONFIG_EXYNOS5 if ((readl(&i2c->iicstat) & I2CSTAT_BSY) || GetI2CSDA() == 0) { #ifdef CONFIG_S3C2410 ulong old_gpecon = readl(&gpio->gpecon); @@ -170,27 +221,8 @@ void i2c_init(int speed, int slaveadd) writel(old_gpecon, &gpio->pgcon); #endif } - - /* calculate prescaler and divisor values */ - freq = get_PCLK(); - if ((freq / pres / (16 + 1)) > speed) - /* set prescaler to 512 */ - pres = 512; - - div = 0; - while ((freq / pres / (div + 1)) > speed) - div++; - - /* set prescaler, divisor according to freq, also set - * ACKGEN, IRQ */ - writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->iiccon); - - /* init to SLAVE REVEIVE and set slaveaddr */ - writel(0, &i2c->iicstat); - writel(slaveadd, &i2c->iicadd); - /* program Master Transmit (and implicit STOP) */ - writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); - +#endif /* #ifndef CONFIG_EXYNOS5 */ + i2c_ch_init(i2c, speed, slaveadd); } /* @@ -200,19 +232,19 @@ void i2c_init(int speed, int slaveadd) * by the char, we could make it larger if needed. If it is * 0 we skip the address write cycle. */ -static -int i2c_transfer(unsigned char cmd_type, - unsigned char chip, - unsigned char addr[], - unsigned char addr_len, - unsigned char data[], unsigned short data_len) +static int i2c_transfer(struct s3c24x0_i2c *i2c, + unsigned char cmd_type, + unsigned char chip, + unsigned char addr[], + unsigned char addr_len, + unsigned char data[], + unsigned short data_len) { - struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); int i, result; if (data == 0 || data_len == 0) { /*Don't support data transfer of no length or to address 0 */ - printf("i2c_transfer: bad call\n"); + debug("i2c_transfer: bad call\n"); return I2C_NOK; } @@ -226,7 +258,7 @@ int i2c_transfer(unsigned char cmd_type, if (readl(&i2c->iicstat) & I2CSTAT_BSY) return I2C_NOK_TOUT; - writel(readl(&i2c->iiccon) | 0x80, &i2c->iiccon); + writel(readl(&i2c->iiccon) | I2CCON_ACKGEN, &i2c->iiccon); result = I2C_OK; switch (cmd_type) { @@ -238,16 +270,16 @@ int i2c_transfer(unsigned char cmd_type, &i2c->iicstat); i = 0; while ((i < addr_len) && (result == I2C_OK)) { - result = WaitForXfer(); + result = WaitForXfer(i2c); writel(addr[i], &i2c->iicds); - ReadWriteByte(); + ReadWriteByte(i2c); i++; } i = 0; while ((i < data_len) && (result == I2C_OK)) { - result = WaitForXfer(); + result = WaitForXfer(i2c); writel(data[i], &i2c->iicds); - ReadWriteByte(); + ReadWriteByte(i2c); i++; } } else { @@ -257,19 +289,19 @@ int i2c_transfer(unsigned char cmd_type, &i2c->iicstat); i = 0; while ((i < data_len) && (result = I2C_OK)) { - result = WaitForXfer(); + result = WaitForXfer(i2c); writel(data[i], &i2c->iicds); - ReadWriteByte(); + ReadWriteByte(i2c); i++; } } if (result == I2C_OK) - result = WaitForXfer(); + result = WaitForXfer(i2c); /* send STOP */ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); - ReadWriteByte(); + ReadWriteByte(i2c); break; case I2C_READ: @@ -279,13 +311,13 @@ int i2c_transfer(unsigned char cmd_type, /* send START */ writel(readl(&i2c->iicstat) | I2C_START_STOP, &i2c->iicstat); - result = WaitForXfer(); - if (IsACK()) { + result = WaitForXfer(i2c); + if (IsACK(i2c)) { i = 0; while ((i < addr_len) && (result == I2C_OK)) { writel(addr[i], &i2c->iicds); - ReadWriteByte(); - result = WaitForXfer(); + ReadWriteByte(i2c); + result = WaitForXfer(i2c); i++; } @@ -293,16 +325,17 @@ int i2c_transfer(unsigned char cmd_type, /* resend START */ writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP, &i2c->iicstat); - ReadWriteByte(); - result = WaitForXfer(); + ReadWriteByte(i2c); + result = WaitForXfer(i2c); i = 0; while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) writel(readl(&i2c->iiccon) - & ~0x80, &i2c->iiccon); - ReadWriteByte(); - result = WaitForXfer(); + & ~I2CCON_ACKGEN, + &i2c->iiccon); + ReadWriteByte(i2c); + result = WaitForXfer(i2c); data[i] = readl(&i2c->iicds); i++; } @@ -316,17 +349,18 @@ int i2c_transfer(unsigned char cmd_type, /* send START */ writel(readl(&i2c->iicstat) | I2C_START_STOP, &i2c->iicstat); - result = WaitForXfer(); + result = WaitForXfer(i2c); - if (IsACK()) { + if (IsACK(i2c)) { i = 0; while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) writel(readl(&i2c->iiccon) & - ~0x80, &i2c->iiccon); - ReadWriteByte(); - result = WaitForXfer(); + ~I2CCON_ACKGEN, + &i2c->iiccon); + ReadWriteByte(i2c); + result = WaitForXfer(i2c); data[i] = readl(&i2c->iicds); i++; } @@ -337,22 +371,24 @@ int i2c_transfer(unsigned char cmd_type, /* send STOP */ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); - ReadWriteByte(); + ReadWriteByte(i2c); break; default: - printf("i2c_transfer: bad call\n"); + debug("i2c_transfer: bad call\n"); result = I2C_NOK; break; } - return (result); + return result; } int i2c_probe(uchar chip) { + struct s3c24x0_i2c *i2c; uchar buf[1]; + i2c = get_base_i2c(); buf[0] = 0; /* @@ -360,16 +396,17 @@ int i2c_probe(uchar chip) * address was ed (i.e. there was a chip at that address which * drove the data line low). */ - return i2c_transfer(I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK; + return i2c_transfer(i2c, I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK; } int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) { + struct s3c24x0_i2c *i2c; uchar xaddr[4]; int ret; if (alen > 4) { - printf("I2C read: addr len %d not supported\n", alen); + debug("I2C read: addr len %d not supported\n", alen); return 1; } @@ -396,10 +433,11 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif - if ((ret = - i2c_transfer(I2C_READ, chip << 1, &xaddr[4 - alen], alen, - buffer, len)) != 0) { - printf("I2c read: failed %d\n", ret); + i2c = get_base_i2c(); + ret = i2c_transfer(i2c, I2C_READ, chip << 1, &xaddr[4 - alen], alen, + buffer, len); + if (ret != 0) { + debug("I2c read: failed %d\n", ret); return 1; } return 0; @@ -407,10 +445,11 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) { + struct s3c24x0_i2c *i2c; uchar xaddr[4]; if (alen > 4) { - printf("I2C write: addr len %d not supported\n", alen); + debug("I2C write: addr len %d not supported\n", alen); return 1; } @@ -436,8 +475,9 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif + i2c = get_base_i2c(); return (i2c_transfer - (I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer, + (i2c, I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer, len) != 0); } #endif /* CONFIG_HARD_I2C */