diff --git a/MAINTAINERS b/MAINTAINERS
index acbd7f1..c03ebb4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -713,6 +713,7 @@ Chander Kashyap <k.chander@samsung.com>
 
 	origen			ARM ARMV7 (EXYNOS4210 SoC)
 	SMDKV310		ARM ARMV7 (EXYNOS4210 SoC)
+	SMDK5250		ARM ARMV7 (EXYNOS5250 SoC)
 
 Heungjun Kim <riverful.kim@samsung.com>
 
diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile
new file mode 100644
index 0000000..d9c2774
--- /dev/null
+++ b/board/samsung/smdk5250/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2011 Samsung Electronics
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+SOBJS	:= lowlevel_init.o
+
+COBJS	:= clock_init.o
+COBJS	+= dmc_init.o
+COBJS	+= tzpc_init.o
+COBJS	+= smdk5250.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+ALL	:=	 $(obj).depend $(LIB)
+
+all:	$(ALL)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c
new file mode 100644
index 0000000..2b53a47
--- /dev/null
+++ b/board/samsung/smdk5250/clock_init.c
@@ -0,0 +1,202 @@
+/*
+ * Clock setup for SMDK5250 board based on EXYNOS5
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include "setup.h"
+
+void system_clock_init()
+{
+	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+
+	/*
+	 * MUX_APLL_SEL[0]: FINPLL = 0
+	 * MUX_CPU_SEL[6]: MOUTAPLL = 0
+	 * MUX_HPM_SEL[20]: MOUTAPLL = 0
+	 */
+	writel(0x0, &clk->src_cpu);
+
+	/* MUX_MPLL_SEL[8]: FINPLL = 0 */
+	writel(0x0, &clk->src_core1);
+
+	/*
+	 * VPLLSRC_SEL[0]: FINPLL = 0
+	 * MUX_{CPLL[8]}|{EPLL[12]}|{VPLL[16]}_SEL: FINPLL = 0
+	 */
+	writel(0x0, &clk->src_top2);
+
+	/* MUX_BPLL_SEL[0]: FINPLL = 0*/
+	writel(0x0, &clk->src_cdrex);
+
+	/* MUX_ACLK_* Clock Selection */
+	writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+
+	/* MUX_ACLK_* Clock Selection */
+	writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+
+	/* MUX_ACLK_* Clock Selection */
+	writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
+
+	/* MUX_PWI_SEL[19:16]: SCLKMPLL = 6 */
+	writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
+
+	/* MUX_ATCLK_LEX[0]: ACLK_200 = 0*/
+	writel(CLK_SRC_LEX_VAL, &clk->src_lex);
+
+	/* UART [0-5]: SCLKMPLL = 6 */
+	writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
+
+	/* Set Clock Ratios */
+	writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0);
+
+	/* Set COPY and HPM Ratio */
+	writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
+
+	/* CORED_RATIO, COREP_RATIO */
+	writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
+
+	/* PWI_RATIO[11:8], DVSEM_RATIO[22:16], DPM_RATIO[24:20] */
+	writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
+
+	/* ACLK_*_RATIO */
+	writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
+
+	/* ACLK_*_RATIO */
+	writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
+
+	/* CDREX Ratio */
+	writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
+
+	/* MCLK_EFPHY_RATIO[3:0] */
+	writel(CLK_DIV_CDREX2_VAL, &clk->div_cdrex2);
+
+	/* {PCLK[4:6]|ATCLK[10:8]}_RATIO */
+	writel(CLK_DIV_LEX_VAL, &clk->div_lex);
+
+	/* PCLK_R0X_RATIO[3:0] */
+	writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
+
+	/* PCLK_R1X_RATIO[3:0] */
+	writel(CLK_DIV_R1X_VAL, &clk->div_r1x);
+
+	/* SATA[24]: SCLKMPLL=0, MMC[0-4]: SCLKMPLL = 6 */
+	writel(CLK_SRC_FSYS_VAL, &clk->src_fsys);
+
+	/* UART[0-4] */
+	writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
+
+	/* PWM_RATIO[3:0] */
+	writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);
+
+	/* SATA_RATIO, USB_DRD_RATIO */
+	writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
+
+	/* MMC[0-1] */
+	writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
+
+	/* MMC[2-3] */
+	writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
+
+	/* MMC[4] */
+	writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3);
+
+	/* ACLK|PLCK_ACP_RATIO */
+	writel(CLK_DIV_ACP_VAL, &clk->div_acp);
+
+	/* ISPDIV0_RATIO, ISPDIV1_RATIO */
+	writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
+
+	/* MCUISPDIV0_RATIO, MCUISPDIV1_RATIO */
+	writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
+
+	/* MPWMDIV_RATIO */
+	writel(CLK_DIV_ISP2_VAL, &clk->div_isp2);
+
+	/* PLL locktime */
+	writel(APLL_LOCK_VAL, &clk->apll_lock);
+
+	writel(MPLL_LOCK_VAL, &clk->mpll_lock);
+
+	writel(BPLL_LOCK_VAL, &clk->bpll_lock);
+
+	writel(CPLL_LOCK_VAL, &clk->cpll_lock);
+
+	writel(EPLL_LOCK_VAL, &clk->epll_lock);
+
+	writel(VPLL_LOCK_VAL, &clk->vpll_lock);
+
+	sdelay(0x10000);
+
+	/* Set APLL */
+	writel(APLL_CON1_VAL, &clk->apll_con1);
+	writel(APLL_CON0_VAL, &clk->apll_con0);
+	sdelay(0x30000);
+
+	/* Set MPLL */
+	writel(MPLL_CON1_VAL, &clk->mpll_con1);
+	writel(MPLL_CON0_VAL, &clk->mpll_con0);
+	sdelay(0x30000);
+	writel(BPLL_CON1_VAL, &clk->bpll_con1);
+	writel(BPLL_CON0_VAL, &clk->bpll_con0);
+	sdelay(0x30000);
+
+	/* Set CPLL */
+	writel(CPLL_CON1_VAL, &clk->cpll_con1);
+	writel(CPLL_CON0_VAL, &clk->cpll_con0);
+	sdelay(0x30000);
+
+	/* Set EPLL */
+	writel(EPLL_CON2_VAL, &clk->epll_con2);
+	writel(EPLL_CON1_VAL, &clk->epll_con1);
+	writel(EPLL_CON0_VAL, &clk->epll_con0);
+	sdelay(0x30000);
+
+	/* Set VPLL */
+	writel(VPLL_CON2_VAL, &clk->vpll_con2);
+	writel(VPLL_CON1_VAL, &clk->vpll_con1);
+	writel(VPLL_CON0_VAL, &clk->vpll_con0);
+	sdelay(0x30000);
+
+	/* Set MPLL */
+	/* After Initiallising th PLL select the sources accordingly */
+	/* MUX_APLL_SEL[0]: MOUTAPLLFOUT = 1 */
+	writel(CLK_SRC_CPU_VAL, &clk->src_cpu);
+
+	/* MUX_MPLL_SEL[8]: MOUTMPLLFOUT = 1 */
+	writel(CLK_SRC_CORE1_VAL, &clk->src_core1);
+
+	/* MUX_BPLL_SEL[0]: FOUTBPLL = 1*/
+	writel(CLK_SRC_CDREX_VAL, &clk->src_cdrex);
+
+	/*
+	 * VPLLSRC_SEL[0]: FINPLL = 0
+	 * MUX_{CPLL[8]}|{EPLL[12]}|{VPLL[16]}_SEL: MOUT{CPLL|EPLL|VPLL} = 1
+	 * MUX_{MPLL[20]}|{BPLL[24]}_USER_SEL: FOUT{MPLL|BPLL} = 1
+	 */
+	writel(CLK_SRC_TOP2_VAL, &clk->src_top2);
+}
diff --git a/board/samsung/smdk5250/dmc_init.c b/board/samsung/smdk5250/dmc_init.c
new file mode 100644
index 0000000..6f92d8a
--- /dev/null
+++ b/board/samsung/smdk5250/dmc_init.c
@@ -0,0 +1,508 @@
+/*
+ * Memory setup for SMDK5250 board based on EXYNOS5
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include "setup.h"
+
+/* APLL : 1GHz */
+/* MCLK_CDREX: MCLK_CDREX_533*/
+/* LPDDR support: LPDDR2 */
+
+void mem_ctrl_asm_init()
+{
+	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+	struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
+	struct exynos5_dmc *dmc;
+	unsigned int val;
+
+	phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE;
+	phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE;
+	dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE;
+
+	/* Reset PHY Controllor: PHY_RESET[0] */
+	writel(0x0, &clk->lpddr3phy_ctrl);
+
+	sdelay(0x10000);
+
+	/*set Read Latance and Burst Length for PHY0 and PHY1 */
+	val = 0x408;
+	writel(val, &phy0_ctrl->phy_con42);
+	writel(val, &phy1_ctrl->phy_con42);
+
+	/*
+	 * ZQ Calibration:
+	 * Select Driver Strength,
+	 * long calibration for manual calibration
+	 */
+	val = 0x0DA40304;
+	writel(val, &phy0_ctrl->phy_con16);
+	writel(val, &phy1_ctrl->phy_con16);
+
+	/* Enable termination */
+	val = 0x0DAC0304;
+	writel(val, &phy0_ctrl->phy_con16);
+	writel(val, &phy1_ctrl->phy_con16);
+
+	/* Start Manual Calibration */
+	val = 0x0DAC0306;
+	writel(val, &phy0_ctrl->phy_con16);
+	writel(val, &phy1_ctrl->phy_con16);
+
+	sdelay(0x10000);
+
+	/* Enable termination */
+	val = 0x0DAC0304;
+	writel(val, &phy0_ctrl->phy_con16);
+	writel(val, &phy1_ctrl->phy_con16);
+
+	/* DDR Mode: LPDDR2 */
+	val = 0x17021240;
+	writel(val, &phy0_ctrl->phy_con0);
+	writel(val, &phy1_ctrl->phy_con0);
+
+	/* DQS, DQ: Signal, for LPDDR2: Always Set */
+	val = 0x00000F0F;
+	writel(val, &phy0_ctrl->phy_con14);
+	writel(val, &phy1_ctrl->phy_con14);
+
+	/* RD_FETCH: 1 */
+	val = 0x1FFF1000;
+	writel(val, &dmc->concontrol);
+	sdelay(0x10000);
+
+	val = 0x0FFF1000;
+	writel(val, &dmc->concontrol);
+	sdelay(0x10000);
+
+	/*
+	 * Update DLL Information:
+	 * Force DLL Resyncronization
+	 */
+	val = 0x00000008;
+	writel(val, &dmc->phycontrol0);
+
+	/* Reset Force DLL Resyncronization */
+	val = 0x00000000;
+	writel(val, &dmc->phycontrol0);
+
+	/*
+	 * Dynamic Clock: Always Running
+	 * Memory Burst length: 4
+	 * Number of chips: 2
+	 * Memory Bus width: 32 bit
+	 * Memory Type: LPDDR2-S4
+	 * Additional Latancy for PLL: 1 Cycle
+	 */
+	val = 0x00212500;
+	writel(val, &dmc->memcontrol);
+
+	/*
+	 * Memory Configuration Chip 0
+	 * Address Mapping: Interleaved
+	 * Number of Column address Bits: 10 bits
+	 * Number of Rows Address Bits: 14
+	 * Number of Banks: 8
+	 */
+	val = 0x00001323;
+	writel(val, &dmc->memconfig0);
+
+	/*
+	 * Memory Configuration Chip 1
+	 * Address Mapping: Interleaved
+	 * Number of Column address Bits: 10 bits
+	 * Number of Rows Address Bits: 14
+	 * Number of Banks: 8
+	 */
+	val = 0x00001323;
+	writel(val, &dmc->memconfig1);
+
+	/*
+	 * Chip0: AXI
+	 * AXI Base Address: 0x40000000
+	 * AXI Base Address Mask: 0x780
+	 */
+	val = 0x00400780;
+	writel(val, &dmc->membaseconfig0);
+
+	/*
+	 * Chip1: AXI
+	 * AXI Base Address: 0x80000000
+	 * AXI Base Address Mask: 0x780
+	 */
+	val = 0x00800780;
+	writel(val, &dmc->membaseconfig1);
+
+	/* Precharge Configuration */
+	val = 0xFF000000;
+	writel(val, &dmc->prechconfig);
+
+	/* Power Down mode Configuration */
+	val = 0xFFFF00FF;
+	writel(val, &dmc->pwrdnconfig);
+
+	/* Periodic Refrese Interval */
+	val = 0x0000005D;
+	writel(val, &dmc->timingref);
+
+	/* MCLK_CDREX_533 */
+	/*
+	 * TimingRow, TimingData, TimingPower Setting:
+	 * Values as per Memory AC Parameters
+	 */
+	val = 0x2336544C;
+	writel(val, &dmc->timingrow);
+
+	val = 0x24202408;
+	writel(val, &dmc->timingdata);
+
+	val = 0x38260235;
+	writel(val, &dmc->timingpower);
+
+	/* Memory Channel Inteleaving Size: 128 Bytes */
+	val = CONFIG_IV_SIZE;
+	writel(val, &dmc->ivcontrol);
+
+	/* Set Offsets to read DQS */
+	val = 0x7F7F7F7F;
+	writel(val, &phy0_ctrl->phy_con4);
+	writel(val, &phy1_ctrl->phy_con4);
+
+	/* Set Offsets to read DQ */
+	val = 0x7F7F7F7F;
+	writel(val, &phy0_ctrl->phy_con6);
+	writel(val, &phy1_ctrl->phy_con6);
+
+	/* Debug Offset */
+	val = 0x0000007F;
+	writel(val, &phy0_ctrl->phy_con10);
+	writel(val, &phy1_ctrl->phy_con10);
+
+	/* Start DLL Locking */
+	val = 0x10107F50;
+	writel(val, &phy0_ctrl->phy_con12);
+	writel(val, &phy1_ctrl->phy_con12);
+
+	sdelay(0x10000);
+
+	/*
+	 * Update DLL Information:
+	 * Force DLL Resyncronization
+	 */
+	val = 0x00000008;
+	writel(val, &dmc->phycontrol0);
+
+	/* Reset DLL Resyncronization */
+	val = 0x00000000;
+	writel(val, &dmc->phycontrol0);
+
+	/*
+	 * NOP CMD: Channel 0, Chip 0
+	 * Exit from active/precharge power down or deep power down
+	 */
+	val = 0x07000000;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+	val = 0x00071C00;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	val = 0x00010BFC;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* MCLK_CDREX_533 */
+	val = 0x00000708;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	val = 0x00000818;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/*
+	 * NOP CMD: Channel 0, Chip 1
+	 * Exit from active/precharge power down or deep power down
+	 */
+	val = 0x07100000;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+	val = 0x00171C00;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	val = 0x00110BFC;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* MCLK_CDREX_533 */
+	val = 0x00100708;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	val = 0x00100818;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/*
+	 * NOP CMD: Channel 1, Chip 0
+	 * Exit from active/precharge power down or deep power down
+	 */
+	val = 0x17000000;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+	val = 0x10071C00;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	val = 0x10010BFC;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* MCLK_CDREX_533 */
+	val = 0x10000708;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	val = 0x10000818;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/*
+	 * NOP CMD: Channel 1, Chip 1
+	 * Exit from active/precharge power down or deep power down
+	 */
+	val = 0x17100000;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+	val = 0x10171C00;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	val = 0x10110BFC;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* MCLK_CDREX_533 */
+	val = 0x10100708;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	val = 0x10100818;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* Reset DQS Offsets */
+	val = 0x08080808;
+	writel(val, &phy0_ctrl->phy_con4);
+	writel(val, &phy1_ctrl->phy_con4);
+
+	/* Reset DQ Offsets */
+	val = 0x08080808;
+	writel(val, &phy0_ctrl->phy_con6);
+	writel(val, &phy1_ctrl->phy_con6);
+
+	/* Reset debug Offsets */
+	val = 0x00000008;
+	writel(val, &phy0_ctrl->phy_con10);
+	writel(val, &phy1_ctrl->phy_con10);
+
+	/* Set DLL Locking */
+	val = 0x10107F30;
+	writel(val, &phy0_ctrl->phy_con12);
+	writel(val, &phy1_ctrl->phy_con12);
+
+	sdelay(0x10000);
+
+	/* Start DLL Locking */
+	val = 0x10107F70;
+	writel(val, &phy0_ctrl->phy_con12);
+	writel(val, &phy1_ctrl->phy_con12);
+
+	sdelay(0x10000);
+
+	/*
+	 * Update DLL Information:
+	 * Force DLL Resyncronization
+	 */
+	val = 0x00000008;
+	writel(val, &dmc->phycontrol0);
+
+	/* Reset DLL Resyncronization */
+	val = 0x00000000;
+	writel(val, &dmc->phycontrol0);
+
+	sdelay(0x10000);
+
+	/*
+	 * Update DLL Information:
+	 * Force DLL Resyncronization
+	 */
+	val = 0x00000008;
+	writel(val, &dmc->phycontrol0);
+
+	/* Reset DLL Resyncronization */
+	val = 0x00000000;
+	writel(val, &dmc->phycontrol0);
+
+	sdelay(0x10000);
+#if defined(CONFIG_RD_LVL)
+	/* DLL On */
+	val = 0x10102D50;
+	writel(val, &phy0_ctrl->phy_con12);
+	writel(val, &phy1_ctrl->phy_con12);
+
+	/*
+	 * Set ctrl_gateadj, ctrl_readadj
+	 * ctrl_gateduradj, rdlvl_pass_adj
+	 * rdlvl_rddataPadj
+	 */
+	val = 0x09210001;
+	writel(val, &phy0_ctrl->phy_con1);
+	writel(val, &phy1_ctrl->phy_con1);
+
+	/* LPDDR2 Address */
+	val = 0x00000208;
+	writel(val, &phy0_ctrl->phy_con22);
+	writel(val, &phy1_ctrl->phy_con22);
+
+	/* Enable Byte Read Leleling */
+	val = 0x17023240;
+	writel(val, &phy0_ctrl->phy_con0);
+	writel(val, &phy1_ctrl->phy_con0);
+
+	/* rdlvl_en: Use levelling offset instead ctrl_shiftc */
+	val = 0x02010004;
+	writel(val, &phy0_ctrl->phy_con2);
+	writel(val, &phy1_ctrl->phy_con2);
+
+	sdelay(0x10000);
+
+	/* Enable Data Eye Trainig */
+	val = 0x00000002;
+	writel(val, &dmc->rdlvl_config);
+
+	sdelay(0x10000);
+
+	/* Disable Data Eye Trainig */
+	val = 0x00000000;
+	writel(val, &dmc->rdlvl_config);
+
+	/* RdDeSkew_clear: Clear */
+	val = 0x02012004;
+	writel(val, &phy0_ctrl->phy_con2);
+	writel(val, &phy1_ctrl->phy_con2);
+
+	/* Start DLL Locking */
+	val = 0x10107F70;
+	writel(val, &phy0_ctrl->phy_con12);
+	writel(val, &phy1_ctrl->phy_con12);
+
+	/* Force DLL Resyncronization */
+	val = 0x00000008;
+	writel(val, &dmc->phycontrol0);
+
+	/* Reset DLL Resyncronization */
+	val = 0x00000000;
+	writel(val, &dmc->phycontrol0);
+
+	sdelay(0x10000);
+
+	/* ctrl_atgate: ctrl_gate_p*, ctrl_read_p* generated by PHY*/
+	val = 0x17023200;
+	writel(val, &phy0_ctrl->phy_con0);
+	writel(val, &phy1_ctrl->phy_con0);
+
+	/* Channel:0, Chip:0, PALL (all banks precharge) CMD */
+	val = 0x01000000;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* Channel:0, Chip:1, PALL (all banks precharge) CMD */
+	val = 0x01100000;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* Channel:1, Chip:0, PALL (all banks precharge) CMD */
+	val = 0x11000000;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+
+	/* Channel:1, Chip:1, PALL (all banks precharge) CMD */
+	val = 0x11100000;
+	writel(val, &dmc->directcmd);
+
+	sdelay(0x10000);
+#endif
+	/*
+	 * Dynamic Clock: Stops During Idle Period
+	 * Dynamic Power Down: Enable
+	 * Dynamic Self refresh: Enable
+	 * Memory Burst length: 4
+	 * Number of chips: 2
+	 * Memory Bus width: 32 bit
+	 * Memory Type: LPDDR2-S4
+	 * Additional Latancy for PLL: 1 Cycle
+	 */
+	val = 0x00212523;
+	writel(val, &dmc->memcontrol);
+
+	/* Start Auto refresh */
+	val = 0x0FFF10E0;
+	writel(val, &dmc->concontrol);
+}
diff --git a/board/samsung/smdk5250/lowlevel_init.S b/board/samsung/smdk5250/lowlevel_init.S
new file mode 100644
index 0000000..d7a0c2e
--- /dev/null
+++ b/board/samsung/smdk5250/lowlevel_init.S
@@ -0,0 +1,96 @@
+/*
+ * Lowlevel setup for SMDK5250 board based on S5PC520
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+_TEXT_BASE:
+	.word	CONFIG_SYS_TEXT_BASE
+
+	.globl lowlevel_init
+lowlevel_init:
+
+	/* use iRAM stack in bl2 */
+	ldr	sp, =CONFIG_IRAM_STACK
+	stmdb	r13!, {ip,lr}
+
+	/* check reset status */
+	ldr	r0, =(EXYNOS5_POWER_BASE + INFORM1_OFFSET)
+	ldr	r1, [r0]
+
+	/* AFTR wakeup reset */
+	ldr	r2, =S5P_CHECK_DIDLE
+	cmp	r1, r2
+	beq	exit_wakeup
+
+	/* LPA wakeup reset */
+	ldr	r2, =S5P_CHECK_LPA
+	cmp	r1, r2
+	beq	exit_wakeup
+
+	/* Sleep wakeup reset */
+	ldr	r2, =S5P_CHECK_SLEEP
+	cmp	r1, r2
+	beq	wakeup_reset
+
+	/*
+	 * If U-boot is already running in RAM, no need to relocate U-Boot.
+	 * Memory controller must be configured before relocating U-Boot
+	 * in ram.
+	 */
+	ldr	r0, =0x0ffffff		/* r0 <- Mask Bits*/
+	bic	r1, pc, r0		/* pc <- current addr of code */
+					/* r1 <- unmasked bits of pc */
+	ldr	r2, _TEXT_BASE		/* r2 <- original base addr in ram */
+	bic	r2, r2, r0		/* r2 <- unmasked bits of r2*/
+	cmp	r1, r2			/* compare r1, r2 */
+	beq	1f			/* r0 == r1 then skip sdram init */
+
+	/* init system clock */
+	bl	system_clock_init
+
+	/* Memory initialize */
+	bl	mem_ctrl_asm_init
+
+1:
+	bl	tzpc_init
+	ldmia	r13!, {ip,pc}
+
+wakeup_reset:
+	bl	system_clock_init
+	bl	mem_ctrl_asm_init
+	bl	tzpc_init
+
+exit_wakeup:
+	/* Load return address and jump to kernel */
+	ldr	r0, =(EXYNOS5_POWER_BASE + INFORM0_OFFSET)
+
+	/* r1 = physical address of exynos5_cpu_resume function*/
+	ldr	r1, [r0]
+
+	/* Jump to kernel */
+	mov	pc, r1
+	nop
+	nop
diff --git a/board/samsung/smdk5250/setup.h b/board/samsung/smdk5250/setup.h
new file mode 100644
index 0000000..2ff7400
--- /dev/null
+++ b/board/samsung/smdk5250/setup.h
@@ -0,0 +1,353 @@
+/*
+ * Machine Specific Values for SMDK5250 board based on S5PC520
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SMDK5250_SETUP_H
+#define _SMDK5250_SETUP_H
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+/* GPIO Offsets for UART: GPIO Contol Register */
+#define EXYNOS5_GPIO_A0_CON_OFFSET	0x0
+#define EXYNOS5_GPIO_A1_CON_OFFSET	0x20
+
+/* TZPC : Register Offsets */
+#define TZPC0_BASE		0x10100000
+#define TZPC1_BASE		0x10110000
+#define TZPC2_BASE		0x10120000
+#define TZPC3_BASE		0x10130000
+#define TZPC4_BASE		0x10140000
+#define TZPC5_BASE		0x10150000
+#define TZPC6_BASE		0x10160000
+#define TZPC7_BASE		0x10170000
+#define TZPC8_BASE		0x10180000
+#define TZPC9_BASE		0x10190000
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL, 1 = SCLKMPLL */
+#define MUX_HPM_SEL		0
+#define MUX_CPU_SEL		0
+#define MUX_APLL_SEL		1
+#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20) \
+				| (MUX_CPU_SEL << 16) \
+				| (MUX_APLL_SEL))
+
+/* CLK_DIV_CPU0 */
+#define ARM2_RATIO		0x0
+#define APLL_RATIO		0x1
+#define PCLK_DBG_RATIO		0x1
+#define ATB_RATIO		0x4
+#define PERIPH_RATIO		0x7
+#define ACP_RATIO		0x7
+#define CPUD_RATIO		0x2
+#define ARM_RATIO		0x0
+#define CLK_DIV_CPU0_VAL	((ARM2_RATIO << 28) \
+				| (APLL_RATIO << 24) \
+				| (PCLK_DBG_RATIO << 20) \
+				| (ATB_RATIO << 16) \
+				| (PERIPH_RATIO << 12) \
+				| (ACP_RATIO << 8) \
+				| (CPUD_RATIO << 4) \
+				| (ARM_RATIO))
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO		0x4
+#define COPY_RATIO		0x0
+#define CLK_DIV_CPU1_VAL	((HPM_RATIO << 4) \
+				| (COPY_RATIO))
+
+#define APLL_MDIV		0x7D
+#define APLL_PDIV		0x3
+#define APLL_SDIV		0x0
+
+#define MPLL_MDIV		0x64
+#define MPLL_PDIV		0x3
+#define MPLL_SDIV		0x0
+
+#define CPLL_MDIV		0x96
+#define CPLL_PDIV		0x4
+#define CPLL_SDIV		0x0
+
+/* APLL_CON1 */
+#define APLL_CON1_VAL	(0x00203800)
+
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL	(0x00203800)
+
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL	(0x00203800)
+
+#define EPLL_MDIV	0x60
+#define EPLL_PDIV	0x3
+#define EPLL_SDIV	0x3
+
+#define EPLL_CON1_VAL	0x00000000
+#define EPLL_CON2_VAL	0x00000080
+
+#define VPLL_MDIV	0x96
+#define VPLL_PDIV	0x3
+#define VPLL_SDIV	0x2
+
+#define VPLL_CON1_VAL	0x00000000
+#define VPLL_CON2_VAL	0x00000080
+
+#define BPLL_MDIV	0x215
+#define BPLL_PDIV	0xC
+#define BPLL_SDIV	0x1
+
+#define BPLL_CON1_VAL	0x00203800
+
+/* Set PLL */
+#define set_pll(mdiv, pdiv, sdiv)	(1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
+
+#define APLL_CON0_VAL	set_pll(APLL_MDIV, APLL_PDIV, APLL_SDIV)
+#define MPLL_CON0_VAL	set_pll(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
+#define CPLL_CON0_VAL	set_pll(CPLL_MDIV, CPLL_PDIV, CPLL_SDIV)
+#define EPLL_CON0_VAL	set_pll(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
+#define VPLL_CON0_VAL	set_pll(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
+#define BPLL_CON0_VAL	set_pll(BPLL_MDIV, BPLL_PDIV, BPLL_SDIV)
+
+/* CLK_SRC_CORE0 */
+#define CLK_SRC_CORE0_VAL	0x00060000
+
+/* CLK_SRC_CORE1 */
+#define CLK_SRC_CORE1_VAL	0x100
+
+/* CLK_DIV_CORE0 */
+#define CLK_DIV_CORE0_VAL	0x120000
+
+/* CLK_DIV_CORE1 */
+#define CLK_DIV_CORE1_VAL	0x07070700
+
+/* CLK_SRC_CDREX */
+#define CLK_SRC_CDREX_VAL	0x111
+
+/* CLK_DIV_CDREX */
+#define MCLK_CDREX2_RATIO	0x0
+#define ACLK_EFCON_RATIO	0x1
+#define MCLK_DPHY_RATIO		0x0
+#define MCLK_CDREX_RATIO	0x0
+#define ACLK_C2C_200_RATIO	0x1
+#define C2C_CLK_400_RATIO	0x1
+#define PCLK_CDREX_RATIO	0x3
+#define ACLK_CDREX_RATIO	0x1
+#define CLK_DIV_CDREX_VAL	((MCLK_DPHY_RATIO << 20) \
+				| (MCLK_CDREX_RATIO << 16) \
+				| (ACLK_C2C_200_RATIO << 12) \
+				| (C2C_CLK_400_RATIO << 8) \
+				| (PCLK_CDREX_RATIO << 4) \
+				| (ACLK_CDREX_RATIO))
+
+#define MCLK_EFPHY_RATIO	0x4
+#define CLK_DIV_CDREX2_VAL	MCLK_EFPHY_RATIO
+
+/* CLK_DIV_ACP */
+#define CLK_DIV_ACP_VAL	0x12
+
+/* CLK_SRC_TOP0 */
+#define MUX_ACLK_300_GSCL_SEL		0x1
+#define MUX_ACLK_300_GSCL_MID_SEL	0x0
+#define MUX_ACLK_400_SEL		0x0
+#define MUX_ACLK_333_SEL		0x0
+#define MUX_ACLK_300_DISP1_SEL		0x1
+#define MUX_ACLK_300_DISP1_MID_SEL	0x0
+#define MUX_ACLK_200_SEL		0x0
+#define MUX_ACLK_166_SEL		0x0
+#define CLK_SRC_TOP0_VAL	((MUX_ACLK_300_GSCL_SEL << 25) \
+				| (MUX_ACLK_300_GSCL_MID_SEL << 24) \
+				| (MUX_ACLK_400_SEL << 20) \
+				| (MUX_ACLK_333_SEL << 16) \
+				| (MUX_ACLK_300_DISP1_SEL << 15) \
+				| (MUX_ACLK_300_DISP1_MID_SEL << 14)	\
+				| (MUX_ACLK_200_SEL << 12) \
+				| (MUX_ACLK_166_SEL << 8))
+
+/* CLK_SRC_TOP1 */
+#define MUX_ACLK_400_ISP_SEL		0x0
+#define MUX_ACLK_400_IOP_SEL		0x0
+#define MUX_ACLK_MIPI_HSI_TXBASE_SEL	0x0
+#define CLK_SRC_TOP1_VAL		((MUX_ACLK_400_ISP_SEL << 24) \
+					|(MUX_ACLK_400_IOP_SEL << 20) \
+					|(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16))
+
+/* CLK_SRC_TOP2 */
+#define MUX_BPLL_USER_SEL	0x1
+#define MUX_MPLL_USER_SEL	0x1
+#define MUX_VPLL_SEL		0x0
+#define MUX_EPLL_SEL		0x0
+#define MUX_CPLL_SEL		0x0
+#define VPLLSRC_SEL		0x0
+#define CLK_SRC_TOP2_VAL	((MUX_BPLL_USER_SEL << 24) \
+				| (MUX_MPLL_USER_SEL << 20) \
+				| (MUX_VPLL_SEL << 16) \
+				| (MUX_EPLL_SEL << 12) \
+				| (MUX_CPLL_SEL << 8) \
+				| (VPLLSRC_SEL))
+/* CLK_SRC_TOP3 */
+#define MUX_ACLK_333_SUB_SEL		0x1
+#define MUX_ACLK_400_SUB_SEL		0x1
+#define MUX_ACLK_266_ISP_SUB_SEL	0x1
+#define MUX_ACLK_266_GPS_SUB_SEL	0x1
+#define MUX_ACLK_300_GSCL_SUB_SEL	0x1
+#define MUX_ACLK_266_GSCL_SUB_SEL	0x1
+#define MUX_ACLK_300_DISP1_SUB_SEL	0x1
+#define MUX_ACLK_200_DISP1_SUB_SEL	0x1
+#define CLK_SRC_TOP3_VAL		((MUX_ACLK_333_SUB_SEL << 24) \
+					| (MUX_ACLK_400_SUB_SEL << 20) \
+					| (MUX_ACLK_266_ISP_SUB_SEL << 16) \
+					| (MUX_ACLK_266_GPS_SUB_SEL << 12) \
+					| (MUX_ACLK_300_GSCL_SUB_SEL << 10) \
+					| (MUX_ACLK_266_GSCL_SUB_SEL << 8) \
+					| (MUX_ACLK_300_DISP1_SUB_SEL << 6) \
+					| (MUX_ACLK_200_DISP1_SUB_SEL << 4))
+
+/* CLK_DIV_TOP0 */
+#define ACLK_300_RATIO		0x0
+#define ACLK_400_RATIO		0x3
+#define ACLK_333_RATIO		0x2
+#define ACLK_266_RATIO		0x2
+#define ACLK_200_RATIO		0x3
+#define ACLK_166_RATIO		0x5
+#define ACLK_133_RATIO		0x1
+#define ACLK_66_RATIO		0x5
+#define CLK_DIV_TOP0_VAL	((ACLK_300_RATIO << 28) \
+				| (ACLK_400_RATIO << 24) \
+				| (ACLK_333_RATIO << 20) \
+				| (ACLK_266_RATIO << 16) \
+				| (ACLK_200_RATIO << 12) \
+				| (ACLK_166_RATIO << 8) \
+				| (ACLK_133_RATIO << 4) \
+				| (ACLK_66_RATIO))
+
+/* CLK_DIV_TOP1 */
+#define ACLK_MIPI_HSI_TX_BASE_RATIO	0x3
+#define ACLK_66_PRE_RATIO	0x1
+#define ACLK_400_ISP_RATIO	0x1
+#define ACLK_400_IOP_RATIO	0x1
+#define ACLK_300_GSCL_RATIO	0x0
+#define ACLK_266_GPS_RATIO	0x7
+
+#define CLK_DIV_TOP1_VAL	((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \
+				| (ACLK_66_PRE_RATIO << 24) \
+				| (ACLK_400_ISP_RATIO << 20) \
+				| (ACLK_400_IOP_RATIO << 16) \
+				| (ACLK_300_GSCL_RATIO << 12) \
+				| (ACLK_266_GPS_RATIO << 8))
+
+/* APLL_LOCK */
+#define APLL_LOCK_VAL		(0x3E8)
+/* MPLL_LOCK */
+#define MPLL_LOCK_VAL		(0x2F1)
+/* CPLL_LOCK */
+#define CPLL_LOCK_VAL		(0x3E8)
+/* EPLL_LOCK */
+#define EPLL_LOCK_VAL		(0x2321)
+/* VPLL_LOCK */
+#define VPLL_LOCK_VAL		(0x2321)
+/* BPLL_LOCK */
+#define BPLL_LOCK_VAL		(0x3E8)
+
+/* CLK_SRC_PERIC0 */
+/* SRC_CLOCK = SCLK_MPLL */
+#define PWM_SEL			0
+#define UART4_SEL		6
+#define UART3_SEL		6
+#define UART2_SEL		6
+#define UART1_SEL		6
+#define UART0_SEL		6
+#define CLK_SRC_PERIC0_VAL	((PWM_SEL << 24) \
+				| (UART4_SEL << 16) \
+				| (UART3_SEL << 12) \
+				| (UART2_SEL << 8) \
+				| (UART1_SEL << 4) \
+				| (UART0_SEL << 0))
+
+#define CLK_SRC_FSYS_VAL	0x66666
+#define CLK_DIV_FSYS0_VAL	0x0BB00000
+#define CLK_DIV_FSYS1_VAL	0x000f000f
+#define CLK_DIV_FSYS2_VAL	0x020f020f
+#define CLK_DIV_FSYS3_VAL	0x000f
+
+/* CLK_DIV_PERIC0 */
+#define UART5_RATIO		8
+#define UART4_RATIO		8
+#define UART3_RATIO		8
+#define UART2_RATIO		8
+#define UART1_RATIO		8
+#define UART0_RATIO		8
+#define CLK_DIV_PERIC0_VAL	((UART4_RATIO << 16) \
+				| (UART3_RATIO << 12) \
+				| (UART2_RATIO << 8) \
+				| (UART1_RATIO << 4) \
+				| (UART0_RATIO << 0))
+
+/* CLK_DIV_PERIC3 */
+#define PWM_RATIO		8
+#define CLK_DIV_PERIC3_VAL	(PWM_RATIO << 0)
+
+/* CLK_SRC_LEX */
+#define CLK_SRC_LEX_VAL		0x0
+
+/* CLK_DIV_LEX */
+#define CLK_DIV_LEX_VAL		0x10
+
+/* CLK_DIV_R0X */
+#define CLK_DIV_R0X_VAL		0x10
+
+/* CLK_DIV_L0X */
+#define CLK_DIV_R1X_VAL		0x10
+
+/* SCLK_SRC_ISP */
+#define SCLK_SRC_ISP_VAL	0x600
+/* CLK_DIV_ISP0 */
+#define CLK_DIV_ISP0_VAL	0x31
+
+/* CLK_DIV_ISP1 */
+#define CLK_DIV_ISP1_VAL	0x0
+
+/* CLK_DIV_ISP2 */
+#define CLK_DIV_ISP2_VAL	0x1
+
+#define MPLL_DEC	(MPLL_MDIV * MPLL_MDIV / (MPLL_PDIV * 2^(MPLL_SDIV-1)))
+
+/*
+ * TZPC Register Value :
+ * R0SIZE: 0x0 : Size of secured ram
+ */
+#define R0SIZE			0x0
+
+/*
+ * TZPC Decode Protection Register Value :
+ * DECPROTXSET: 0xFF : Set Decode region to non-secure
+ */
+#define DECPROTXSET		0xFF
+
+void sdelay(unsigned long);
+void mem_ctrl_asm_init(void);
+void system_clock_init(void);
+void uart_asm_init(void);
+void tzpc_init(void);
+
+#endif
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
new file mode 100644
index 0000000..66d56ab
--- /dev/null
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/sromc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+struct exynos5_gpio_part1 *gpio1;
+
+int board_init(void)
+{
+	gpio1 = (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+
+	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size	= get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
+			+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
+			+ get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
+			+ get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)
+			+ get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE)
+			+ get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE)
+			+ get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE)
+			+ get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE);
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \
+							PHYS_SDRAM_1_SIZE);
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \
+							PHYS_SDRAM_2_SIZE);
+	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+	gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \
+							PHYS_SDRAM_3_SIZE);
+	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+	gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \
+							PHYS_SDRAM_4_SIZE);
+	gd->bd->bi_dram[4].start = PHYS_SDRAM_5;
+	gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5, \
+							PHYS_SDRAM_5_SIZE);
+	gd->bd->bi_dram[5].start = PHYS_SDRAM_6;
+	gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6, \
+							PHYS_SDRAM_6_SIZE);
+	gd->bd->bi_dram[6].start = PHYS_SDRAM_7;
+	gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7, \
+							PHYS_SDRAM_7_SIZE);
+	gd->bd->bi_dram[7].start = PHYS_SDRAM_8;
+	gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8, \
+							PHYS_SDRAM_8_SIZE);
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	printf("\nBoard: SMDK5250\n");
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	int i, err;
+
+	/*
+	 * MMC2 SD card GPIO:
+	 *
+	 * GPC2[0]	SD_2_CLK(2)
+	 * GPC2[1]	SD_2_CMD(2)
+	 * GPC2[2]	SD_2_CDn
+	 * GPC2[3:6]	SD_2_DATA[0:3](2)
+	 */
+	for (i = 0; i < 7; i++) {
+		/* GPC2[0:6] special function 2 */
+		s5p_gpio_cfg_pin(&gpio1->c2, i, GPIO_FUNC(0x2));
+
+		/* GPK2[0:6] drv 4x */
+		s5p_gpio_set_drv(&gpio1->c2, i, GPIO_DRV_4X);
+
+		/* GPK2[0:1] pull disable */
+		if (i == 0 || i == 1) {
+			s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_NONE);
+			continue;
+		}
+
+		/* GPK2[2:6] pull up */
+		s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_UP);
+	}
+
+	err = s5p_mmc_init(2, 4);
+	return err;
+}
+#endif
+
+static void board_uart_init(void)
+{
+	struct exynos5_gpio_part1 *gpio1 =
+		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+	int i;
+
+	/* UART0-UART1 GPIOs (part1) : 0x22222222 */
+	for (i = 0; i < 8; i++) {
+		s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
+		s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
+	}
+
+	/* UART2-UART3 GPIOs (part2) : 0x00222222 */
+	for (i = 0; i < 6; i++) {
+		s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
+		s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2));
+	}
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	board_uart_init();
+	return 0;
+}
+#endif
diff --git a/board/samsung/smdk5250/tzpc_init.c b/board/samsung/smdk5250/tzpc_init.c
new file mode 100644
index 0000000..c2ccef3
--- /dev/null
+++ b/board/samsung/smdk5250/tzpc_init.c
@@ -0,0 +1,48 @@
+/*
+ * Lowlevel setup for SMDK5250 board based on S5PC520
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/tzpc.h>
+#include"setup.h"
+
+/* Setting TZPC[TrustZone Protection Controller] */
+void tzpc_init(void)
+{
+	struct exynos5_tzpc *tzpc;
+	unsigned int addr;
+
+	for (addr = TZPC0_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
+		tzpc = (struct exynos5_tzpc *)addr;
+
+		if (addr == TZPC0_BASE)
+			writel(R0SIZE, &tzpc->r0size);
+
+		writel(DECPROTXSET, &tzpc->decprot0set);
+		writel(DECPROTXSET, &tzpc->decprot1set);
+
+		if (addr != TZPC9_BASE) {
+			writel(DECPROTXSET, &tzpc->decprot2set);
+			writel(DECPROTXSET, &tzpc->decprot3set);
+		}
+	}
+}
diff --git a/boards.cfg b/boards.cfg
index 4aaa891..c0bac3c 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -221,6 +221,7 @@ s5p_goni                     arm         armv7       goni                samsung
 smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
 origen			     arm	 armv7	     origen		 samsung	exynos
 s5pc210_universal            arm         armv7       universal_c210      samsung        exynos
+smdk5250		     arm	 armv7	     smdk5250		 samsung	exynos
 smdkv310		     arm	 armv7	     smdkv310		 samsung	exynos
 trats                        arm         armv7       trats               samsung        exynos
 harmony                      arm         armv7       harmony             nvidia         tegra2
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
new file mode 100644
index 0000000..194130d
--- /dev/null
+++ b/include/configs/smdk5250.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG SMDK5250 (EXYNOS5250) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
+#define CONFIG_S5P		1	/* S5P Family */
+#define CONFIG_EXYNOS5		1	/* which is in a Exynos5 Family */
+#define CONFIG_CPU_EXYNOS5250	1	/* which is in a Exynos5250 */
+#define CONFIG_SMDK5250		1	/* which is in a SMDK5250 */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_L2_OFF			1
+#define CONFIG_SYS_DCACHE_OFF		1
+
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_TEXT_BASE		0x43E00000
+
+/* input clock of PLL: SMDK5250 has 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ		24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* MACH_TYPE_SMDK5250 macro will be removed once added to mach-types */
+#define MACH_TYPE_SMDK5250		3774
+#define CONFIG_MACH_TYPE		MACH_TYPE_SMDK5250
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP			0x00000BAD
+#define S5P_CHECK_DIDLE			0xBAD00000
+#define S5P_CHECK_LPA			0xABAD0000
+
+/* Offset for inform registers */
+#define INFORM0_OFFSET			0x800
+#define INFORM1_OFFSET			0x804
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL_MULTI		1
+#define CONFIG_SERIAL1			1	/* use SERIAL 1 */
+#define CONFIG_BAUDRATE			115200
+#define EXYNOS5_DEFAULT_UART_OFFSET	0x010000
+
+#define TZPC_BASE_OFFSET		0x10000
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC		1
+#define CONFIG_MMC			1
+#define CONFIG_S5P_MMC			1
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* PWM */
+#define CONFIG_PWM			1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_BOOTDELAY		3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_BOOTCOMMAND	"fatload mmc 0 40007000 uImage; bootm 40007000"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"SMDK5250 # "
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		384	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_SYS_HZ			1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE		(256 << 10)	/* 256KB */
+
+#define CONFIG_NR_DRAM_BANKS	8
+#define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2		(CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3		(CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4		(CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_5		(CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_5_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_6		(CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_6_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_7		(CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_7_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_8		(CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_8_SIZE	SDRAM_BANK_SIZE
+
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
+
+/* (Memory Interleaving Size = 1 << IV_SIZE) */
+#define CONFIG_IV_SIZE		0x07
+#define CONFIG_RD_LVL		1
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH		1
+#undef CONFIG_CMD_IMLS
+#define CONFIG_IDENT_STRING		" for SMDK5250"
+
+#define CONFIG_ENV_IS_IN_MMC		1
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#define CONFIG_SECURE_BL1_ONLY
+
+/* Secure FW size configuration */
+#ifdef	CONFIG_SECURE_BL1_ONLY
+#define	CONFIG_SEC_FW_SIZE		(8 << 10)	/* 8KB */
+#else
+#define	CONFIG_SEC_FW_SIZE		0
+#endif
+
+/* Configuration of BL1, BL2, ENV Blocks on mmc */
+#define CONFIG_RES_BLOCK_SIZE	(512)
+#define CONFIG_BL1_SIZE		(16 << 10) /*16 K reserved for BL1*/
+#define	CONFIG_BL2_SIZE		(512UL << 10UL)	/* 512 KB */
+#define CONFIG_ENV_SIZE		(16 << 10)	/* 16 KB */
+
+#define CONFIG_BL1_OFFSET	(CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
+#define CONFIG_BL2_OFFSET	(CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
+#define CONFIG_ENV_OFFSET	(CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
+
+/* U-boot copy size from boot Media to DRAM.*/
+#define BL2_START_OFFSET	(CONFIG_BL2_OFFSET/512)
+#define BL2_SIZE_BLOC_COUNT	(CONFIG_BL2_SIZE/512)
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_IRAM_STACK	0x02050000
+
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+#define MMC_MAX_CHANNEL		5
+
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
+
+#endif	/* __CONFIG_H */
