diff --git a/MAINTAINERS b/MAINTAINERS
index 37bbb34..d493e4e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -691,12 +691,12 @@ Minkyu Kang <mk7.kang@samsung.com>
 
 	SMDKC100		ARM ARMV7 (S5PC100 SoC)
 	s5p_goni		ARM ARMV7 (S5PC110 SoC)
-	s5pc210_universal	ARM ARMV7 (S5PC210 SoC)
+	s5pc210_universal	ARM ARMV7 (EXYNOS4210 SoC)
 
 Chander Kashyap <k.chander@samsung.com>
 
-	origen			ARM ARMV7 (S5PC210 SoC)
-	SMDKV310		ARM ARMV7 (S5PC210 SoC)
+	origen			ARM ARMV7 (EXYNOS4210 SoC)
+	SMDKV310		ARM ARMV7 (EXYNOS4210 SoC)
 
 Torsten Koschorrek <koschorrek@synertronixx.de>
 	scb9328		ARM920T (i.MXL)
diff --git a/Makefile b/Makefile
index fb658f4..3875466 100644
--- a/Makefile
+++ b/Makefile
@@ -296,7 +296,7 @@ endif
 ifeq ($(SOC),s5pc1xx)
 LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
 endif
-ifeq ($(SOC),s5pc2xx)
+ifeq ($(SOC),exynos)
 LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
 endif
 
diff --git a/arch/arm/cpu/armv7/s5pc2xx/Makefile b/arch/arm/cpu/armv7/exynos/Makefile
similarity index 100%
rename from arch/arm/cpu/armv7/s5pc2xx/Makefile
rename to arch/arm/cpu/armv7/exynos/Makefile
diff --git a/arch/arm/cpu/armv7/s5pc2xx/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
similarity index 81%
rename from arch/arm/cpu/armv7/s5pc2xx/clock.c
rename to arch/arm/cpu/armv7/exynos/clock.c
index 5ecd475..64de262 100644
--- a/arch/arm/cpu/armv7/s5pc2xx/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -30,11 +30,11 @@
 #define CONFIG_SYS_CLK_FREQ_C210	24000000
 #endif
 
-/* s5pc210: return pll clock frequency */
-static unsigned long s5pc210_get_pll_clk(int pllreg)
+/* exynos4: return pll clock frequency */
+static unsigned long exynos4_get_pll_clk(int pllreg)
 {
-	struct s5pc210_clock *clk =
-		(struct s5pc210_clock *)samsung_get_base_clock();
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
 	unsigned long r, m, p, s, k = 0, mask, fout;
 	unsigned int freq;
 
@@ -96,11 +96,11 @@ static unsigned long s5pc210_get_pll_clk(int pllreg)
 	return fout;
 }
 
-/* s5pc210: return ARM clock frequency */
-static unsigned long s5pc210_get_arm_clk(void)
+/* exynos4: return ARM clock frequency */
+static unsigned long exynos4_get_arm_clk(void)
 {
-	struct s5pc210_clock *clk =
-		(struct s5pc210_clock *)samsung_get_base_clock();
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
 	unsigned long div;
 	unsigned long dout_apll;
 	unsigned int apll_ratio;
@@ -115,11 +115,11 @@ static unsigned long s5pc210_get_arm_clk(void)
 	return dout_apll;
 }
 
-/* s5pc210: return pwm clock frequency */
-static unsigned long s5pc210_get_pwm_clk(void)
+/* exynos4: return pwm clock frequency */
+static unsigned long exynos4_get_pwm_clk(void)
 {
-	struct s5pc210_clock *clk =
-		(struct s5pc210_clock *)samsung_get_base_clock();
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
 	unsigned long pclk, sclk;
 	unsigned int sel;
 	unsigned int ratio;
@@ -158,11 +158,11 @@ static unsigned long s5pc210_get_pwm_clk(void)
 	return pclk;
 }
 
-/* s5pc210: return uart clock frequency */
-static unsigned long s5pc210_get_uart_clk(int dev_index)
+/* exynos4: return uart clock frequency */
+static unsigned long exynos4_get_uart_clk(int dev_index)
 {
-	struct s5pc210_clock *clk =
-		(struct s5pc210_clock *)samsung_get_base_clock();
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
 	unsigned long uclk, sclk;
 	unsigned int sel;
 	unsigned int ratio;
@@ -205,11 +205,11 @@ static unsigned long s5pc210_get_uart_clk(int dev_index)
 	return uclk;
 }
 
-/* s5pc210: set the mmc clock */
-static void s5pc210_set_mmc_clk(int dev_index, unsigned int div)
+/* exynos4: set the mmc clock */
+static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
 {
-	struct s5pc210_clock *clk =
-		(struct s5pc210_clock *)samsung_get_base_clock();
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
 	unsigned int addr;
 	unsigned int val;
 
@@ -234,25 +234,25 @@ static void s5pc210_set_mmc_clk(int dev_index, unsigned int div)
 
 unsigned long get_pll_clk(int pllreg)
 {
-	return s5pc210_get_pll_clk(pllreg);
+	return exynos4_get_pll_clk(pllreg);
 }
 
 unsigned long get_arm_clk(void)
 {
-	return s5pc210_get_arm_clk();
+	return exynos4_get_arm_clk();
 }
 
 unsigned long get_pwm_clk(void)
 {
-	return s5pc210_get_pwm_clk();
+	return exynos4_get_pwm_clk();
 }
 
 unsigned long get_uart_clk(int dev_index)
 {
-	return s5pc210_get_uart_clk(dev_index);
+	return exynos4_get_uart_clk(dev_index);
 }
 
 void set_mmc_clk(int dev_index, unsigned int div)
 {
-	s5pc210_set_mmc_clk(dev_index, div);
+	exynos4_set_mmc_clk(dev_index, div);
 }
diff --git a/arch/arm/cpu/armv7/s5pc2xx/soc.c b/arch/arm/cpu/armv7/exynos/soc.c
similarity index 100%
rename from arch/arm/cpu/armv7/s5pc2xx/soc.c
rename to arch/arm/cpu/armv7/exynos/soc.c
diff --git a/arch/arm/include/asm/arch-s5pc2xx/adc.h b/arch/arm/include/asm/arch-exynos/adc.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/adc.h
rename to arch/arm/include/asm/arch-exynos/adc.h
diff --git a/arch/arm/include/asm/arch-s5pc2xx/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/clk.h
rename to arch/arm/include/asm/arch-exynos/clk.h
diff --git a/arch/arm/include/asm/arch-s5pc2xx/clock.h b/arch/arm/include/asm/arch-exynos/clock.h
similarity index 99%
rename from arch/arm/include/asm/arch-s5pc2xx/clock.h
rename to arch/arm/include/asm/arch-exynos/clock.h
index 0ff8cf8..483c911 100644
--- a/arch/arm/include/asm/arch-s5pc2xx/clock.h
+++ b/arch/arm/include/asm/arch-exynos/clock.h
@@ -23,7 +23,7 @@
 #define __ASM_ARM_ARCH_CLOCK_H_
 
 #ifndef __ASSEMBLY__
-struct s5pc210_clock {
+struct exynos4_clock {
 	unsigned char	res1[0x4200];
 	unsigned int	src_leftbus;
 	unsigned char	res2[0x1fc];
diff --git a/arch/arm/include/asm/arch-s5pc2xx/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
similarity index 64%
rename from arch/arm/include/asm/arch-s5pc2xx/cpu.h
rename to arch/arm/include/asm/arch-exynos/cpu.h
index f9015c7..4464d27 100644
--- a/arch/arm/include/asm/arch-s5pc2xx/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -19,33 +19,33 @@
  *
  */
 
-#ifndef _S5PC2XX_CPU_H
-#define _S5PC2XX_CPU_H
+#ifndef _EXYNOS4_CPU_H
+#define _EXYNOS4_CPU_H
 
-#define S5PC2XX_ADDR_BASE	0x10000000
+#define EXYNOS4_ADDR_BASE		0x10000000
 
-/* S5PC210 */
-#define S5PC210_GPIO_PART3_BASE	0x03860000
-#define S5PC210_PRO_ID		0x10000000
-#define S5PC210_POWER_BASE	0x10020000
-#define S5PC210_SWRESET		0x10020400
-#define S5PC210_CLOCK_BASE	0x10030000
-#define S5PC210_SYSTIMER_BASE	0x10050000
-#define S5PC210_WATCHDOG_BASE	0x10060000
-#define S5PC210_MIU_BASE	0x10600000
-#define S5PC210_DMC0_BASE	0x10400000
-#define S5PC210_DMC1_BASE	0x10410000
-#define S5PC210_GPIO_PART2_BASE	0x11000000
-#define S5PC210_GPIO_PART1_BASE	0x11400000
-#define S5PC210_FIMD_BASE	0x11C00000
-#define S5PC210_USBOTG_BASE	0x12480000
-#define S5PC210_MMC_BASE	0x12510000
-#define S5PC210_SROMC_BASE	0x12570000
-#define S5PC210_USBPHY_BASE	0x125B0000
-#define S5PC210_UART_BASE	0x13800000
-#define S5PC210_ADC_BASE	0x13910000
-#define S5PC210_PWMTIMER_BASE	0x139D0000
-#define S5PC210_MODEM_BASE	0x13A00000
+/* EXYNOS4 */
+#define EXYNOS4_GPIO_PART3_BASE		0x03860000
+#define EXYNOS4_PRO_ID			0x10000000
+#define EXYNOS4_POWER_BASE		0x10020000
+#define EXYNOS4_SWRESET			0x10020400
+#define EXYNOS4_CLOCK_BASE		0x10030000
+#define EXYNOS4_SYSTIMER_BASE		0x10050000
+#define EXYNOS4_WATCHDOG_BASE		0x10060000
+#define EXYNOS4_MIU_BASE		0x10600000
+#define EXYNOS4_DMC0_BASE		0x10400000
+#define EXYNOS4_DMC1_BASE		0x10410000
+#define EXYNOS4_GPIO_PART2_BASE		0x11000000
+#define EXYNOS4_GPIO_PART1_BASE		0x11400000
+#define EXYNOS4_FIMD_BASE		0x11C00000
+#define EXYNOS4_USBOTG_BASE		0x12480000
+#define EXYNOS4_MMC_BASE		0x12510000
+#define EXYNOS4_SROMC_BASE		0x12570000
+#define EXYNOS4_USBPHY_BASE		0x125B0000
+#define EXYNOS4_UART_BASE		0x13800000
+#define EXYNOS4_ADC_BASE		0x13910000
+#define EXYNOS4_PWMTIMER_BASE		0x139D0000
+#define EXYNOS4_MODEM_BASE		0x13A00000
 
 #ifndef __ASSEMBLY__
 #include <asm/io.h>
@@ -60,12 +60,12 @@ static inline int s5p_get_cpu_rev(void)
 
 static inline void s5p_set_cpu_id(void)
 {
-	s5p_cpu_id = readl(S5PC210_PRO_ID);
+	s5p_cpu_id = readl(EXYNOS4_PRO_ID);
 	s5p_cpu_id = (0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12));
 
 	/*
-	 * 0xC200: S5PC210 EVT0
-	 * 0xC210: S5PC210 EVT1
+	 * 0xC200: EXYNOS4210 EVT0
+	 * 0xC210: EXYNOS4210 EVT1
 	 */
 	if (s5p_cpu_id == 0xC200) {
 		s5p_cpu_id |= 0x10;
@@ -81,13 +81,13 @@ static inline int cpu_is_##type(void)			\
 	return s5p_cpu_id == id ? 1 : 0;		\
 }
 
-IS_SAMSUNG_TYPE(s5pc210, 0xc210)
+IS_SAMSUNG_TYPE(exynos4, 0xc210)
 
 #define SAMSUNG_BASE(device, base)				\
 static inline unsigned int samsung_get_base_##device(void)	\
 {								\
-	if (cpu_is_s5pc210())					\
-		return S5PC210_##base;				\
+	if (cpu_is_exynos4())					\
+		return EXYNOS4_##base;				\
 	else							\
 		return 0;					\
 }
@@ -110,4 +110,4 @@ SAMSUNG_BASE(usb_otg, USBOTG_BASE)
 SAMSUNG_BASE(watchdog, WATCHDOG_BASE)
 #endif
 
-#endif	/* _S5PC2XX_CPU_H */
+#endif	/* _EXYNOS4_CPU_H */
diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
similarity index 84%
rename from arch/arm/include/asm/arch-s5pc2xx/gpio.h
rename to arch/arm/include/asm/arch-exynos/gpio.h
index 8be620c..9863a12 100644
--- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -32,7 +32,7 @@ struct s5p_gpio_bank {
 	unsigned char	res1[8];
 };
 
-struct s5pc210_gpio_part1 {
+struct exynos4_gpio_part1 {
 	struct s5p_gpio_bank a0;
 	struct s5p_gpio_bank a1;
 	struct s5p_gpio_bank b;
@@ -51,7 +51,7 @@ struct s5pc210_gpio_part1 {
 	struct s5p_gpio_bank f3;
 };
 
-struct s5pc210_gpio_part2 {
+struct exynos4_gpio_part2 {
 	struct s5p_gpio_bank j0;
 	struct s5p_gpio_bank j1;
 	struct s5p_gpio_bank k0;
@@ -75,7 +75,7 @@ struct s5pc210_gpio_part2 {
 	struct s5p_gpio_bank x3;
 };
 
-struct s5pc210_gpio_part3 {
+struct exynos4_gpio_part3 {
 	struct s5p_gpio_bank z;
 };
 
@@ -92,27 +92,27 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
 /* GPIO pins per bank  */
 #define GPIO_PER_BANK 8
 
-#define s5pc210_gpio_part1_get_nr(bank, pin) \
-	((((((unsigned int) &(((struct s5pc210_gpio_part1 *) \
-			       S5PC210_GPIO_PART1_BASE)->bank)) \
-	    - S5PC210_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
+#define exynos4_gpio_part1_get_nr(bank, pin) \
+	((((((unsigned int) &(((struct exynos4_gpio_part1 *) \
+			       EXYNOS4_GPIO_PART1_BASE)->bank)) \
+	    - EXYNOS4_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
 	  * GPIO_PER_BANK) + pin)
 
-#define GPIO_PART1_MAX ((sizeof(struct s5pc210_gpio_part1) \
+#define GPIO_PART1_MAX ((sizeof(struct exynos4_gpio_part1) \
 			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
 
-#define s5pc210_gpio_part2_get_nr(bank, pin) \
-	(((((((unsigned int) &(((struct s5pc210_gpio_part2 *) \
-				S5PC210_GPIO_PART2_BASE)->bank)) \
-	    - S5PC210_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
+#define exynos4_gpio_part2_get_nr(bank, pin) \
+	(((((((unsigned int) &(((struct exynos4_gpio_part2 *) \
+				EXYNOS4_GPIO_PART2_BASE)->bank)) \
+	    - EXYNOS4_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
 	  * GPIO_PER_BANK) + pin) + GPIO_PART1_MAX)
 
 static inline unsigned int s5p_gpio_base(int nr)
 {
 	if (nr < GPIO_PART1_MAX)
-		return S5PC210_GPIO_PART1_BASE;
+		return EXYNOS4_GPIO_PART1_BASE;
 	else
-		return S5PC210_GPIO_PART2_BASE;
+		return EXYNOS4_GPIO_PART2_BASE;
 
 	return 0;
 }
diff --git a/arch/arm/include/asm/arch-s5pc2xx/mmc.h b/arch/arm/include/asm/arch-exynos/mmc.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/mmc.h
rename to arch/arm/include/asm/arch-exynos/mmc.h
diff --git a/arch/arm/include/asm/arch-s5pc2xx/pwm.h b/arch/arm/include/asm/arch-exynos/pwm.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/pwm.h
rename to arch/arm/include/asm/arch-exynos/pwm.h
diff --git a/arch/arm/include/asm/arch-s5pc2xx/sromc.h b/arch/arm/include/asm/arch-exynos/sromc.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/sromc.h
rename to arch/arm/include/asm/arch-exynos/sromc.h
diff --git a/arch/arm/include/asm/arch-s5pc2xx/sys_proto.h b/arch/arm/include/asm/arch-exynos/sys_proto.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/sys_proto.h
rename to arch/arm/include/asm/arch-exynos/sys_proto.h
diff --git a/arch/arm/include/asm/arch-s5pc2xx/uart.h b/arch/arm/include/asm/arch-exynos/uart.h
similarity index 100%
rename from arch/arm/include/asm/arch-s5pc2xx/uart.h
rename to arch/arm/include/asm/arch-exynos/uart.h
diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S
index ddca1e2..0eebbfc 100644
--- a/board/samsung/origen/lowlevel_init.S
+++ b/board/samsung/origen/lowlevel_init.S
@@ -1,5 +1,5 @@
 /*
- * Lowlevel setup for ORIGEN board based on S5PV310
+ * Lowlevel setup for ORIGEN board based on EXYNOS4210
  *
  * Copyright (C) 2011 Samsung Electronics
  *
@@ -43,11 +43,11 @@ lowlevel_init:
 
 	/* r5 has always zero */
 	mov	r5, #0
-	ldr	r7, =S5PC210_GPIO_PART1_BASE
-	ldr	r6, =S5PC210_GPIO_PART2_BASE
+	ldr	r7, =EXYNOS4_GPIO_PART1_BASE
+	ldr	r6, =EXYNOS4_GPIO_PART2_BASE
 
 	/* check reset status */
-	ldr	r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET)
+	ldr	r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET)
 	ldr	r1, [r0]
 
 	/* AFTR wakeup reset */
@@ -97,9 +97,9 @@ wakeup_reset:
 
 exit_wakeup:
 	/* Load return address and jump to kernel */
-	ldr	r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET)
+	ldr	r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET)
 
-	/* r1 = physical address of s5pc210_cpu_resume function */
+	/* r1 = physical address of exynos4210_cpu_resume function */
 	ldr	r1, [r0]
 
 	/* Jump to kernel*/
@@ -113,7 +113,7 @@ exit_wakeup:
  */
 system_clock_init:
 	push	{lr}
-	ldr	r0, =S5PC210_CLOCK_BASE
+	ldr	r0, =EXYNOS4_CLOCK_BASE
 
 	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
 	ldr	r1, =CLK_SRC_CPU_VAL
@@ -290,13 +290,13 @@ uart_asm_init:
 
 	/* setup UART0-UART3 GPIOs (part1) */
 	mov	r0, r7
-	ldr	r1, =S5PC210_GPIO_A0_CON_VAL
-	str	r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET]
-	ldr	r1, =S5PC210_GPIO_A1_CON_VAL
-	str	r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET]
+	ldr	r1, =EXYNOS4_GPIO_A0_CON_VAL
+	str	r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET]
+	ldr	r1, =EXYNOS4_GPIO_A1_CON_VAL
+	str	r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET]
 
-	ldr r0, =S5PC210_UART_BASE
-	add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
+	ldr r0, =EXYNOS4_UART_BASE
+	add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
 
 	ldr	r1, =ULCON_VAL
 	str	r1, [r0, #ULCON_OFFSET]
diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S
index a798848..b49b193 100644
--- a/board/samsung/origen/mem_setup.S
+++ b/board/samsung/origen/mem_setup.S
@@ -1,5 +1,5 @@
 /*
- * Memory setup for ORIGEN board based on S5PV310
+ * Memory setup for ORIGEN board based on EXYNOS4210
  *
  * Copyright (C) 2011 Samsung Electronics
  *
@@ -38,7 +38,7 @@ mem_ctrl_asm_init:
 	str r1, [r0]
 
 #ifdef SET_MIU
-	ldr	r0, =S5PC210_MIU_BASE
+	ldr	r0, =EXYNOS4_MIU_BASE
 	/* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
 	ldr	r1, =0x20001507
 	str	r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
@@ -48,7 +48,7 @@ mem_ctrl_asm_init:
 	str	r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
 #endif
 	/* DREX0 */
-	ldr	r0, =S5PC210_DMC0_BASE
+	ldr	r0, =EXYNOS4_DMC0_BASE
 
 	/*
 	 * DLL Parameter Setting:
@@ -229,7 +229,7 @@ mem_ctrl_asm_init:
 	bne	8b
 
 	/* DREX1 */
-	ldr	r0, =S5PC210_DMC1_BASE	@0x10410000
+	ldr	r0, =EXYNOS4_DMC1_BASE	@0x10410000
 
 	/*
 	 * DLL Parameter Setting:
@@ -410,11 +410,11 @@ mem_ctrl_asm_init:
 	bne	8b
 
 	/* turn on DREX0, DREX1 */
-	ldr	r0, =S5PC210_DMC0_BASE
+	ldr	r0, =EXYNOS4_DMC0_BASE
 	ldr	r1, =0x0FFF303a
 	str	r1, [r0, #DMC_CONCONTROL]
 
-	ldr	r0, =S5PC210_DMC1_BASE
+	ldr	r0, =EXYNOS4_DMC1_BASE
 	ldr	r1, =0x0FFF303a
 	str	r1, [r0, #DMC_CONCONTROL]
 
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
index 8882646..638e7b1 100644
--- a/board/samsung/origen/origen.c
+++ b/board/samsung/origen/origen.c
@@ -27,13 +27,13 @@
 #include <asm/arch/mmc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
-struct s5pc210_gpio_part1 *gpio1;
-struct s5pc210_gpio_part2 *gpio2;
+struct exynos4_gpio_part1 *gpio1;
+struct exynos4_gpio_part2 *gpio2;
 
 int board_init(void)
 {
-	gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
-	gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+	gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
+	gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
 
 	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
 	return 0;
diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h
index 63d85d8..d949ad2 100644
--- a/board/samsung/origen/origen_setup.h
+++ b/board/samsung/origen/origen_setup.h
@@ -98,8 +98,8 @@
 #define INFORM1_OFFSET			0x804
 
 /* GPIO Offsets for UART: GPIO Contol Register */
-#define S5PC210_GPIO_A0_CON_OFFSET	0x00
-#define S5PC210_GPIO_A1_CON_OFFSET	0x20
+#define EXYNOS4_GPIO_A0_CON_OFFSET	0x00
+#define EXYNOS4_GPIO_A1_CON_OFFSET	0x20
 
 /* UART Register offsets */
 #define ULCON_OFFSET		0x00
@@ -416,8 +416,8 @@
  * UART GPIO_A0/GPIO_A1 Control Register Value
  * 0x2: UART Function
  */
-#define S5PC210_GPIO_A0_CON_VAL	0x22222222
-#define S5PC210_GPIO_A1_CON_VAL	0x222222
+#define EXYNOS4_GPIO_A0_CON_VAL	0x22222222
+#define EXYNOS4_GPIO_A1_CON_VAL	0x222222
 
 /* ULCON: UART Line Control Value 8N1 */
 #define WORD_LEN_5_BIT		0x00
diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S
index 58b737b..7a1ea98 100644
--- a/board/samsung/smdkv310/lowlevel_init.S
+++ b/board/samsung/smdkv310/lowlevel_init.S
@@ -1,5 +1,5 @@
 /*
- * Lowlevel setup for SMDKV310 board based on S5PC210
+ * Lowlevel setup for SMDKV310 board based on EXYNOS4210
  *
  * Copyright (C) 2011 Samsung Electronics
  *
@@ -45,11 +45,11 @@ lowlevel_init:
 
 	/* r5 has always zero */
 	mov	r5, #0
-	ldr	r7, =S5PC210_GPIO_PART1_BASE
-	ldr	r6, =S5PC210_GPIO_PART2_BASE
+	ldr	r7, =EXYNOS4_GPIO_PART1_BASE
+	ldr	r6, =EXYNOS4_GPIO_PART2_BASE
 
 	/* check reset status  */
-	ldr     r0, =(S5PC210_POWER_BASE + 0x81C)	@ INFORM7
+	ldr     r0, =(EXYNOS4_POWER_BASE + 0x81C)	@ INFORM7
 	ldr     r1, [r0]
 
 	/* AFTR wakeup reset */
@@ -95,9 +95,9 @@ wakeup_reset:
 
 exit_wakeup:
 	/* Load return address and jump to kernel */
-	ldr     r0, =(S5PC210_POWER_BASE + 0x800)	@ INFORM0
+	ldr     r0, =(EXYNOS4_POWER_BASE + 0x800)	@ INFORM0
 
-	/* r1 = physical address of s5pc210_cpu_resume function */
+	/* r1 = physical address of exynos4210_cpu_resume function */
 	ldr	r1, [r0]
 
 	/* Jump to kernel*/
@@ -111,7 +111,7 @@ exit_wakeup:
  */
 system_clock_init:
 	push	{lr}
-	ldr	r0, =S5PC210_CLOCK_BASE
+	ldr	r0, =EXYNOS4_CLOCK_BASE
 
 	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
 	ldr	r1, =0x0101
@@ -388,12 +388,12 @@ uart_asm_init:
 	/* setup UART0-UART3 GPIOs (part1) */
 	mov	r0, r7
 	ldr	r1, =0x22222222
-	str	r1, [r0, #0x00]			@ S5PC210_GPIO_A0_OFFSET
+	str	r1, [r0, #0x00]			@ EXYNOS4_GPIO_A0_OFFSET
 	ldr	r1, =0x00222222
-	str	r1, [r0, #0x20]			@ S5PC210_GPIO_A1_OFFSET
+	str	r1, [r0, #0x20]			@ EXYNOS4_GPIO_A1_OFFSET
 
-	ldr r0, =S5PC210_UART_BASE
-	add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
+	ldr r0, =EXYNOS4_UART_BASE
+	add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
 
 	ldr r1, =0x3C5
 	str	r1, [r0, #0x4]
diff --git a/board/samsung/smdkv310/mem_setup.S b/board/samsung/smdkv310/mem_setup.S
index 73aebe3..d3b6265 100644
--- a/board/samsung/smdkv310/mem_setup.S
+++ b/board/samsung/smdkv310/mem_setup.S
@@ -1,5 +1,5 @@
 /*
- * Memory setup for SMDKV310 board based on S5PC210
+ * Memory setup for SMDKV310 board based on EXYNOS4210
  *
  * Copyright (C) 2011 Samsung Electronics
  *
@@ -54,7 +54,7 @@ mem_ctrl_asm_init:
 	str r1, [r0]
 
 #ifdef SET_MIU
-	ldr	r0, =S5PC210_MIU_BASE	@0x10600000
+	ldr	r0, =EXYNOS4_MIU_BASE	@0x10600000
 #ifdef CONFIG_MIU_1BIT_INTERLEAVED
 	ldr	r1, =0x0000000c
 	str	r1, [r0, #0x400]	@MIU_INTLV_CONFIG
@@ -89,7 +89,7 @@ mem_ctrl_asm_init:
 #endif
 #endif
 	/* DREX0 */
-	ldr	r0, =S5PC210_DMC0_BASE	@0x10400000
+	ldr	r0, =EXYNOS4_DMC0_BASE	@0x10400000
 
 	ldr	r1, =0xe0000086
 	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
@@ -221,7 +221,7 @@ mem_ctrl_asm_init:
 	bne	8b
 
 	/* DREX1 */
-	ldr	r0, =S5PC210_DMC1_BASE	@0x10410000
+	ldr	r0, =EXYNOS4_DMC1_BASE	@0x10410000
 
 	ldr	r1, =0xe0000086
 	str	r1, [r0, #0x1C]		@DMC_PHYCONTROL1
diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c
index d9caca7..81ac8f6 100644
--- a/board/samsung/smdkv310/smdkv310.c
+++ b/board/samsung/smdkv310/smdkv310.c
@@ -29,8 +29,8 @@
 #include <asm/arch/sromc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
-struct s5pc210_gpio_part1 *gpio1;
-struct s5pc210_gpio_part2 *gpio2;
+struct exynos4_gpio_part1 *gpio1;
+struct exynos4_gpio_part2 *gpio2;
 
 static void smc9115_pre_init(void)
 {
@@ -52,8 +52,8 @@ static void smc9115_pre_init(void)
 
 int board_init(void)
 {
-	gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
-	gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+	gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
+	gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
 
 	smc9115_pre_init();
 
diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S
index 67635bb..dc7f69e 100644
--- a/board/samsung/universal_c210/lowlevel_init.S
+++ b/board/samsung/universal_c210/lowlevel_init.S
@@ -1,5 +1,5 @@
 /*
- * Lowlevel setup for universal board based on S5PC210
+ * Lowlevel setup for universal board based on EXYNOS4210
  *
  * Copyright (C) 2010 Samsung Electronics
  * Kyungmin Park <kyungmin.park@samsung.com>
@@ -43,11 +43,11 @@ lowlevel_init:
 	/* r5 has always zero */
 	mov	r5, #0
 
-	ldr	r7, =S5PC210_GPIO_PART1_BASE
-	ldr	r6, =S5PC210_GPIO_PART2_BASE
+	ldr	r7, =EXYNOS4_GPIO_PART1_BASE
+	ldr	r6, =EXYNOS4_GPIO_PART2_BASE
 
 	/* System Timer */
-	ldr	r0, =S5PC210_SYSTIMER_BASE
+	ldr	r0, =EXYNOS4_SYSTIMER_BASE
 	ldr	r1, =0x5000
 	str	r1, [r0, #0x0]
 	ldr	r1, =0xffffffff
@@ -57,7 +57,7 @@ lowlevel_init:
 
 	/* PMIC manual reset */
 	/* nPOWER: XEINT_23: GPX2[7] */
-	add	r0, r6, #0xC40			@ S5PC210_GPIO_X2_OFFSET
+	add	r0, r6, #0xC40			@ EXYNOS4_GPIO_X2_OFFSET
 	ldr	r1, [r0, #0x0]
 	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
 	orr	r1, r1, #(0x1 << 28)		@ Output
@@ -71,7 +71,7 @@ lowlevel_init:
 	bl	system_clock_init
 
 	/* Disable Watchdog */
-	ldr	r0, =S5PC210_WATCHDOG_BASE		@0x10060000
+	ldr	r0, =EXYNOS4_WATCHDOG_BASE		@0x10060000
 	str	r5, [r0]
 
 	/* UART */
@@ -99,12 +99,12 @@ uart_asm_init:
 	 */
 	mov	r0, r7
 	ldr	r1, =0x22222222
-	str	r1, [r0, #0x00]			@ S5PC210_GPIO_A0_OFFSET
+	str	r1, [r0, #0x00]			@ EXYNOS4_GPIO_A0_OFFSET
 	ldr	r1, =0x00223322
-	str	r1, [r0, #0x20]			@ S5PC210_GPIO_A1_OFFSET
+	str	r1, [r0, #0x20]			@ EXYNOS4_GPIO_A1_OFFSET
 
-	/* UART_SEL GPY4[7] (part2) at S5PC210 */
-	add	r0, r6, #0x1A0			@ S5PC210_GPIO_Y4_OFFSET
+	/* UART_SEL GPY4[7] (part2) at EXYNOS4 */
+	add	r0, r6, #0x1A0			@ EXYNOS4_GPIO_Y4_OFFSET
 	ldr	r1, [r0, #0x0]
 	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
 	orr	r1, r1, #(0x1 << 28)
@@ -125,7 +125,7 @@ uart_asm_init:
 	nop
 
 system_clock_init:
-	ldr	r0, =S5PC210_CLOCK_BASE
+	ldr	r0, =EXYNOS4_CLOCK_BASE
 
 	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
 	ldr	r1, =0x0101
@@ -326,7 +326,7 @@ system_clock_init:
 	nop
 
 system_power_init:
-	ldr	r0, =S5PC210_POWER_BASE		@ 0x10020000
+	ldr	r0, =EXYNOS4_POWER_BASE		@ 0x10020000
 
 	ldr	r2, =0x330C			@ PS_HOLD_CONTROL
 	ldr	r1, [r0, r2]
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index d767eaa..f9b8a76 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -31,8 +31,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-struct s5pc210_gpio_part1 *gpio1;
-struct s5pc210_gpio_part2 *gpio2;
+struct exynos4_gpio_part1 *gpio1;
+struct exynos4_gpio_part2 *gpio2;
 unsigned int board_rev;
 
 u32 get_board_rev(void)
@@ -49,8 +49,8 @@ static void check_hw_revision(void);
 
 int board_init(void)
 {
-	gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
-	gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+	gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
+	gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
 
 	gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/boards.cfg b/boards.cfg
index 7c63449..2abb35f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -201,9 +201,9 @@ omap4_sdp4430                arm         armv7       sdp4430             ti
 omap5_evm                    arm         armv7       omap5_evm           ti		omap5
 s5p_goni                     arm         armv7       goni                samsung        s5pc1xx
 smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
-origen			     arm	 armv7	     origen		 samsung	s5pc2xx
-s5pc210_universal            arm         armv7       universal_c210      samsung        s5pc2xx
-smdkv310		     arm	 armv7	     smdkv310		 samsung	s5pc2xx
+origen			     arm	 armv7	     origen		 samsung	exynos
+s5pc210_universal            arm         armv7       universal_c210      samsung        exynos
+smdkv310		     arm	 armv7	     smdkv310		 samsung	exynos
 harmony                      arm         armv7       harmony             nvidia         tegra2
 seaboard                     arm         armv7       seaboard            nvidia         tegra2
 u8500_href                   arm         armv7       u8500               st-ericsson    u8500
diff --git a/include/configs/origen.h b/include/configs/origen.h
index 380ef4f..cd502d1 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2011 Samsung Electronics
  *
- * Configuration settings for the SAMSUNG ORIGEN (S5PV310) board.
+ * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -28,7 +28,7 @@
 /* High Level Configuration Options */
 #define CONFIG_SAMSUNG			1	/* SAMSUNG core */
 #define CONFIG_S5P			1	/* S5P Family */
-#define CONFIG_S5PC210			1	/* which is in a S5PC210 SoC */
+#define CONFIG_EXYNOS4210		1	/* which is a EXYNOS4210 SoC */
 #define CONFIG_ORIGEN			1	/* working with ORIGEN*/
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
@@ -68,7 +68,7 @@
 #define CONFIG_SERIAL_MULTI		1
 #define CONFIG_SERIAL2			1	/* use SERIAL 2 */
 #define CONFIG_BAUDRATE			115200
-#define S5PC210_DEFAULT_UART_OFFSET	0x020000
+#define EXYNOS4_DEFAULT_UART_OFFSET	0x020000
 
 /* SD/MMC configuration */
 #define CONFIG_GENERIC_MMC		1
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index cc14f97..b36ad3a 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -2,7 +2,7 @@
  * Copyright (C) 2010 Samsung Electronics
  * Minkyu Kang <mk7.kang@samsung.com>
  *
- * Configuation settings for the SAMSUNG Universal (s5pc100) board.
+ * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -32,7 +32,7 @@
  */
 #define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
 #define CONFIG_S5P		1	/* which is in a S5P Family */
-#define CONFIG_S5PC210		1	/* which is in a S5PC210 */
+#define CONFIG_EXYNOS4210	1	/* which is in a EXYNOS4210 */
 #define CONFIG_UNIVERSAL	1	/* working with Universal */
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
@@ -47,7 +47,7 @@
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define CONFIG_SYS_TEXT_BASE		0x44800000
 
-/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */
+/* input clock of PLL: Universal has 24MHz input clock at EXYNOS4210 */
 #define CONFIG_SYS_CLK_FREQ_C210	24000000
 
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -249,8 +249,8 @@
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C_GPIO_SCL s5pc210_gpio_part1_get_nr(b, 7)
-#define CONFIG_SOFT_I2C_GPIO_SDA s5pc210_gpio_part1_get_nr(b, 6)
+#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7)
+#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6)
 
 #define CONFIG_SOFT_I2C
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index fc8bb06..93c25da 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2011 Samsung Electronics
  *
- * Configuration settings for the SAMSUNG SMDKV310 (S5PC210) board.
+ * Configuration settings for the SAMSUNG SMDKV310 (EXYNOS4210) board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -28,7 +28,7 @@
 /* High Level Configuration Options */
 #define CONFIG_SAMSUNG			1	/* in a SAMSUNG core */
 #define CONFIG_S5P			1	/* S5P Family */
-#define CONFIG_S5PC210			1	/* which is in a S5PC210 SoC */
+#define CONFIG_EXYNOS4210		1	/* which is a EXYNOS4210 SoC */
 #define CONFIG_SMDKV310			1	/* working with SMDKV310*/
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
@@ -65,7 +65,7 @@
 #define CONFIG_SERIAL_MULTI		1
 #define CONFIG_SERIAL1			1	/* use SERIAL 1 */
 #define CONFIG_BAUDRATE			115200
-#define S5PC210_DEFAULT_UART_OFFSET	0x010000
+#define EXYNOS4_DEFAULT_UART_OFFSET	0x010000
 
 /* SD/MMC configuration */
 #define CONFIG_GENERIC_MMC		1
