Show patches with: Submitter = Marek Szyprowski       |   118 patches
« 1 2 »
Patch Series S/W/F Date Submitter Delegate State
arm: rpi: perform XHCI firmware upload only once arm: rpi: perform XHCI firmware upload only once --- 2021-09-17 Marek Szyprowski Accepted
ARM: bcm283x: change the virtual address of the XHCI PCI device base ARM: bcm283x: change the virtual address of the XHCI PCI device base --- 2021-06-17 Marek Szyprowski Accepted
[v7,5/5] test: add a simple test for the adc-keys button driver VIM3: add support for checking 'Function' button state --- 2021-02-18 Marek Szyprowski Accepted
[v7,4/5] configs: khadas-vim3(l): enable Function button support VIM3: add support for checking 'Function' button state --- 2021-02-18 Marek Szyprowski New
[v7,3/5] adc: meson-saradc: add support for getting reference voltage value VIM3: add support for checking 'Function' button state --- 2021-02-18 Marek Szyprowski Accepted
[v7,2/5] button: add a simple Analog to Digital Converter device based button driver VIM3: add support for checking 'Function' button state --- 2021-02-18 Marek Szyprowski Accepted
[v7,1/5] dt-bindings: input: adc-keys bindings documentation VIM3: add support for checking 'Function' button state --- 2021-02-18 Marek Szyprowski New
[v6,5/5] test: add a simple test for the adc-keys button driver VIM3: add support for checking 'Function' button state --- 2021-02-11 Marek Szyprowski Superseded
[v6,4/5] configs: khadas-vim3(l): enable Function button support VIM3: add support for checking 'Function' button state --- 2021-02-11 Marek Szyprowski Superseded
[v6,3/5] adc: meson-saradc: add support for getting reference voltage value VIM3: add support for checking 'Function' button state --- 2021-02-11 Marek Szyprowski Superseded
[v6,2/5] button: add a simple Analog to Digital Converter device based button driver VIM3: add support for checking 'Function' button state --- 2021-02-11 Marek Szyprowski Superseded
[v6,1/5] dt-bindings: input: adc-keys bindings documentation VIM3: add support for checking 'Function' button state --- 2021-02-11 Marek Szyprowski Superseded
board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants --- 2021-02-04 Marek Szyprowski Accepted
rpi: limit size of the RAM to the multiple of the MMU_SECTION_SIZE rpi: limit size of the RAM to the multiple of the MMU_SECTION_SIZE --- 2021-02-01 Marek Szyprowski Accepted
[v5,4/4] configs: khadas-vim3(l): enable Function button support VIM3: add support for checking 'Function' button state --- 2021-01-26 Marek Szyprowski Superseded
[v5,3/4] adc: meson-saradc: add support for getting reference voltage value VIM3: add support for checking 'Function' button state --- 2021-01-26 Marek Szyprowski Superseded
[v5,2/4] button: add a simple Analog to Digital Converter device based button driver VIM3: add support for checking 'Function' button state --- 2021-01-26 Marek Szyprowski Superseded
[v5,1/4] dt-bindings: input: adc-keys bindings documentation VIM3: add support for checking 'Function' button state --- 2021-01-26 Marek Szyprowski Superseded
cmd: misc: Fix return value for the sleep command cmd: misc: Fix return value for the sleep command --- 2021-01-22 Marek Szyprowski Accepted
[v3,6/6] cmd: Add MBR partition layout control utility Add MBR partition table creation and verify command --- 2020-12-23 Marek Szyprowski New
[v3,5/6] disk: dos: add code for creating MBR partition layout Add MBR partition table creation and verify command --- 2020-12-23 Marek Szyprowski Accepted
[v3,4/6] disk: dos: make some functions static Add MBR partition table creation and verify command --- 2020-12-23 Marek Szyprowski New
[v3,3/6] disk: dos: use generic macro for unaligned le32 access Add MBR partition table creation and verify command --- 2020-12-23 Marek Szyprowski Accepted
[v3,2/6] disk: dos: add some defines for the hardcoded numbers Add MBR partition table creation and verify command --- 2020-12-23 Marek Szyprowski Accepted
[v3,1/6] disk: dos: rename write_mbr_partition to write_mbr_sector Add MBR partition table creation and verify command --- 2020-12-23 Marek Szyprowski Accepted
[v2,6/6] cmd: Add MBR partition layout control utility Add MBR partition table creation and verify command --- 2020-12-22 Marek Szyprowski Superseded
[v2,5/6] disk: dos: add code for creating MBR partition layout Add MBR partition table creation and verify command --- 2020-12-22 Marek Szyprowski Superseded
[v2,4/6] disk: dos: make some functions static Add MBR partition table creation and verify command --- 2020-12-22 Marek Szyprowski Superseded
[v2,3/6] disk: dos: use generic macro for unaligned le32 access Add MBR partition table creation and verify command --- 2020-12-22 Marek Szyprowski Superseded
[v2,2/6] disk: dos: add some defines for the hardcoded numbers Add MBR partition table creation and verify command --- 2020-12-22 Marek Szyprowski Superseded
[v2,1/6] disk: dos: rename write_mbr_partition to write_mbr_sector Add MBR partition table creation and verify command --- 2020-12-22 Marek Szyprowski Superseded
[v2,5/5] thor: add support for the dfu_alt_info reintialization from the flashed script DFU: new entity types and minor improvements --- 2020-12-22 Marek Szyprowski New
[v2,4/5] dfu: add support for the dfu_alt_info reintialization from the flashed script DFU: new entity types and minor improvements --- 2020-12-22 Marek Szyprowski New
[v2,3/5] dfu: add 'SCRIPT' entity DFU: new entity types and minor improvements --- 2020-12-22 Marek Szyprowski Accepted
[v2,2/5] dfu: add 'SKIP' entity DFU: new entity types and minor improvements --- 2020-12-22 Marek Szyprowski New
[v2,1/5] dfu: mmc: use the default MMC device if entity specifies it as -1 DFU: new entity types and minor improvements --- 2020-12-22 Marek Szyprowski Accepted
[v4,3/3] configs: khadas-vim3(l): enable Function button support VIM3: add support for checking 'Function' button state --- 2020-12-22 Marek Szyprowski Superseded
[v4,2/3] button: add a simple Analog to Digital Converter device based button driver VIM3: add support for checking 'Function' button state --- 2020-12-22 Marek Szyprowski New
[v4,1/3] dt-bindings: input: adc-keys bindings documentation VIM3: add support for checking 'Function' button state --- 2020-12-22 Marek Szyprowski New
board: amlogic: add MMC boot device detection for environment load board: amlogic: add MMC boot device detection for environment load --- 2020-12-18 Marek Szyprowski New
ARM: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4 ARM: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4 --- 2020-12-18 Marek Szyprowski Accepted
[5/5] thor: add support for the dfu_alt_info reintialization from the flashed script DFU: new entity types and minor improvements --- 2020-12-17 Marek Szyprowski Superseded
[4/5] dfu: add support for the dfu_alt_info reintialization from the flashed script DFU: new entity types and minor improvements --- 2020-12-17 Marek Szyprowski Superseded
[3/5] dfu: add 'SCRIPT' entity DFU: new entity types and minor improvements --- 2020-12-17 Marek Szyprowski New
[2/5] dfu: add 'SKIP' entity DFU: new entity types and minor improvements --- 2020-12-17 Marek Szyprowski New
[1/5] dfu: mmc: use the default MMC device if entity specifies it as -1 DFU: new entity types and minor improvements --- 2020-12-17 Marek Szyprowski Superseded
[6/6] cmd: Add MBR partition layout control utility Add MBR partition table creation and verify command --- 2020-12-17 Marek Szyprowski New
[5/6] disk: dos: add code for creating MBR partition layout Add MBR partition table creation and verify command --- 2020-12-17 Marek Szyprowski Superseded
[4/6] disk: dos: make some functions static Add MBR partition table creation and verify command --- 2020-12-17 Marek Szyprowski Superseded
[3/6] disk: dos: use generic macro for unaligned le32 access Add MBR partition table creation and verify command --- 2020-12-17 Marek Szyprowski Superseded
[2/6] disk: dos: add some defines for the hardcoded numbers Add MBR partition table creation and verify command --- 2020-12-17 Marek Szyprowski Superseded
[1/6] disk: dos: rename write_mbr_partition to write_mbr_sector Add MBR partition table creation and verify command --- 2020-12-17 Marek Szyprowski Superseded
cmd: usb_mass_storage: show device interface name cmd: usb_mass_storage: show device interface name --- 2020-12-17 Marek Szyprowski Accepted
[PATCH/RFC] board: amlogic: Fix Odroid-C4 SD card reboot issue [PATCH/RFC] board: amlogic: Fix Odroid-C4 SD card reboot issue --- 2020-12-17 Marek Szyprowski New
board: amlogic: vim3: read ethernet MAC address from efuse board: amlogic: vim3: read ethernet MAC address from efuse --- 2020-12-17 Marek Szyprowski Accepted
[v3,6/6] configs: khadas-vim3: enable Function button support VIM3: add support for checking 'Function' button state --- 2020-12-16 Marek Szyprowski New
[v3,5/6] button: add a simple ADC-based button driver VIM3: add support for checking 'Function' button state --- 2020-12-16 Marek Szyprowski Superseded
[v3,4/6] configs: khadas-vim3: enable ADC device support VIM3: add support for checking 'Function' button state --- 2020-12-16 Marek Szyprowski New
[v3,3/6] adc: meson-saradc: skip hardware init only if ADC is enabled VIM3: add support for checking 'Function' button state --- 2020-12-16 Marek Szyprowski Accepted
[v3,2/6] adc: meson-saradc: add G12A variant VIM3: add support for checking 'Function' button state --- 2020-12-16 Marek Szyprowski Accepted
[v3,1/6] clk: meson: add minimal driver for g12a-ao clocks VIM3: add support for checking 'Function' button state --- 2020-12-16 Marek Szyprowski Accepted
[v2,6/7,RESEND] cmd: button: store button state in the 'button' env Untitled series #87608 --- 2020-12-15 Marek Szyprowski New
[v2,7/7] configs: khadas-vim3: enable Function button support VIM3: add support for checking 'Function' button state --- 2020-12-15 Marek Szyprowski Superseded
[v2,6/7] cmd: button: store button state in the 'button' env VIM3: add support for checking 'Function' button state --- 2020-12-15 Marek Szyprowski Superseded
[v2,5/7] button: add a simple ADC-based button driver VIM3: add support for checking 'Function' button state --- 2020-12-15 Marek Szyprowski Superseded
[v2,4/7] configs: khadas-vim3: enable ADC device support VIM3: add support for checking 'Function' button state --- 2020-12-15 Marek Szyprowski Superseded
[v2,3/7] adc: meson-saradc: skip hardware init only if ADC is enabled VIM3: add support for checking 'Function' button state --- 2020-12-15 Marek Szyprowski Superseded
[v2,2/7] adc: meson-saradc: add G12A variant VIM3: add support for checking 'Function' button state --- 2020-12-15 Marek Szyprowski Superseded
[v2,1/7] clk: meson: add minimal driver for g12a-ao clocks VIM3: add support for checking 'Function' button state --- 2020-12-15 Marek Szyprowski Superseded
usb: dwc3-meson-g12a: always configure dr-mode usb: dwc3-meson-g12a: always configure dr-mode --- 2020-12-14 Marek Szyprowski Accepted
[6/6] configs: khadas-vim3: enable Function button support VIM3: add support for checking 'Function' button state --- 2020-12-14 Marek Szyprowski Superseded
[5/6] cmd: button: store button state in the 'button' env VIM3: add support for checking 'Function' button state --- 2020-12-14 Marek Szyprowski Superseded
[4/6] button: add a simple ADC-based button driver VIM3: add support for checking 'Function' button state --- 2020-12-14 Marek Szyprowski Superseded
[3/6] adc: meson-saradc: skip hardware init only if ADC is enabled VIM3: add support for checking 'Function' button state --- 2020-12-14 Marek Szyprowski Superseded
[2/6] adc: meson-saradc: add G12A variant VIM3: add support for checking 'Function' button state --- 2020-12-14 Marek Szyprowski Superseded
[1/6] clk: meson: add minimal driver for g12a-ao clocks VIM3: add support for checking 'Function' button state --- 2020-12-14 Marek Szyprowski Superseded
[v2] net: ping: reset stored IP address [v2] net: ping: reset stored IP address --- 2020-06-15 Marek Szyprowski Accepted
[v5,6/6] config: Enable support for the XHCI controller on RPI4 board [v5,1/6] powerpc: move ADDR_MAP to Kconfig --- 2020-06-03 Marek Szyprowski Accepted
[v5,5/6] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit) [v5,1/6] powerpc: move ADDR_MAP to Kconfig --- 2020-06-03 Marek Szyprowski Accepted
[v5,4/6] mmc: bcm283x: fix int to pointer cast [v5,1/6] powerpc: move ADDR_MAP to Kconfig --- 2020-06-03 Marek Szyprowski Superseded
[v5,3/6] arm: provide a function for boards init code to modify MMU virtual-physical map [v5,1/6] powerpc: move ADDR_MAP to Kconfig --- 2020-06-03 Marek Szyprowski Accepted
[v5,2/6] arm: update comments to the common style [v5,1/6] powerpc: move ADDR_MAP to Kconfig --- 2020-06-03 Marek Szyprowski Accepted
[v5,1/6] powerpc: move ADDR_MAP to Kconfig [v5,1/6] powerpc: move ADDR_MAP to Kconfig --- 2020-06-03 Marek Szyprowski New
[v4,5/5] config: Enable support for the XHCI controller on RPI4 board ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-06-02 Marek Szyprowski Superseded
[v4,4/5] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit) ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-06-02 Marek Szyprowski Superseded
[v4,3/5] mmc: bcm283x: fix int to pointer cast ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-06-02 Marek Szyprowski Superseded
[v4,2/5] arm: provide a function for boards init code to modify MMU virtual-physical map ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-06-02 Marek Szyprowski Superseded
[v4,1/5] powerpc: move ADDR_MAP to Kconfig ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-06-02 Marek Szyprowski Superseded
[RFC,v3,3/3] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit) ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-05-18 Marek Szyprowski New
[RFC,v3,2/3] mmc: bcm283x: fix int to pointer cast ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-05-18 Marek Szyprowski New
[RFC,v3,1/3] arm: provide a function for boards init code to modify MMU virtual-physical map ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-05-18 Marek Szyprowski New
[RFC,v2,2/2] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit) ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-05-15 Marek Szyprowski Superseded
[RFC,v2,1/2] arm: provide a function for boards init code to modify MMU virtual-physical map ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-05-15 Marek Szyprowski Superseded
[RFC,2/2] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit) ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-05-12 Marek Szyprowski Superseded
[RFC,1/2] arm: provide a function for boards init code to modify MMU virtual-physical map ARM: arbitrary virtual-physical mappings for RPi4 XHCI support --- 2020-05-12 Marek Szyprowski New
configs: rpi_arm64: sync env size with rpi_{3,4}_defconfig configs: rpi_arm64: sync env size with rpi_{3,4}_defconfig --- 2020-05-05 Marek Szyprowski Accepted
net: ping: reset stored IP once the command finishes net: ping: reset stored IP once the command finishes --- 2020-03-25 Marek Szyprowski New
arm: exynos: odroid: Change autoboot script to use ${mmcbootdev} arm: exynos: odroid: Change autoboot script to use ${mmcbootdev} --- 2020-01-17 Marek Szyprowski Accepted
[v2] arm: exynos: Read default MMC device from XOM[7:5] pins [v2] arm: exynos: Read default MMC device from XOM[7:5] pins --- 2020-01-17 Marek Szyprowski Accepted
[3/3] arm: dts: exynos: Use common alias for Odroid U3/X2 MMC2 (SD-card) Fix Odroid U3/X2 SD-card boot --- 2020-01-16 Marek Szyprowski Accepted
« 1 2 »