List-Id: U-Boot discussion <u-boot.lists.denx.de> From: ian.ray at ge.com (Ian Ray) Date: Tue, 14 Jan 2020 15:56:15 +0000 Subject: [U-Boot, 0/3] power: pmic: add Dialog DA9063 PMIC and regulators Message-ID: <cover.1579014062.git.ian.ray@ge.com>
Add a PMIC driver for DA9063 PMIC and associated registers. Allow pmic dump command to skip register holes. Note: This change is a prerequisite for enabling full DM support for ge_bx50v3_config. Note: Split out of https://patchwork.ozlabs.org/cover/1182351/. Feedback in https://patchwork.ozlabs.org/patch/1182404/ and https://patchwork.ozlabs.org/patch/1182416/ has been addressed. Martin Fuzzey (3): power: pmic: add driver for Dialog DA9063 PMIC power: regulator: add driver for Dialog DA9063 PMIC pmic: allow dump command for non contiguous register maps cmd/pmic.c | 12 +- drivers/power/pmic/Kconfig | 14 ++ drivers/power/pmic/Makefile | 1 + drivers/power/pmic/da9063.c | 130 +++++++++++++ drivers/power/regulator/Kconfig | 20 ++ drivers/power/regulator/Makefile | 1 + drivers/power/regulator/da9063.c | 388 +++++++++++++++++++++++++++++++++++++++ include/power/da9063_pmic.h | 320 ++++++++++++++++++++++++++++++++ 8 files changed, 884 insertions(+), 2 deletions(-) create mode 100644 drivers/power/pmic/da9063.c create mode 100644 drivers/power/regulator/da9063.c create mode 100644 include/power/da9063_pmic.h