mbox series

[0/4] mtd: rawnand: brcmnand: Add BCMBCA support

Message ID 20240930-bcmbca-nand-support-v1-0-e637c65de947@linaro.org
Headers show
Series mtd: rawnand: brcmnand: Add BCMBCA support | expand

Message

Linus Walleij Sept. 30, 2024, 1:24 p.m. UTC 
This adds support for the NAND controller on the Broadcom
BCA (Broadband Access) platforms.

This requires the series with brcmnand fixes that I sent
separately to be merged first. See:
https://patchwork.ozlabs.org/project/uboot/list/?series=424109

The development was done on the Genexis XG6846B which is
a derivative of the BCM96846 reference design, but probably
has a different flash layout, be sure to check the last
patch in the series for a comment on that.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Linus Walleij (4):
      mtd: rawnand: brcmnand: Add BCMBCA RAW NAND driver
      arm: dts: bcm: Update bcm6846 and bcm96846
      drivers: nand: bcmbca: Enable on BCM6846
      board: bcm96846: Enable NAND options

 arch/arm/dts/bcm6846.dtsi                   |  34 +++++++
 arch/arm/dts/bcm96846.dts                   |  14 +++
 arch/arm/mach-bcmbca/bcm6846/Kconfig        |   3 +
 configs/bcm96846_defconfig                  |  12 +++
 drivers/mtd/nand/raw/Kconfig                |   7 ++
 drivers/mtd/nand/raw/brcmnand/Makefile      |   1 +
 drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c | 152 ++++++++++++++++++++++++++++
 7 files changed, 223 insertions(+)
---
base-commit: cd87faf0067493f97b3c0c83daccb2dc124fdd42
change-id: 20240930-bcmbca-nand-support-4447e176bbbd

Best regards,