| Message ID | 20240412095438.410570-1-sumit.garg@linaro.org |
|---|---|
| Headers | show |
| Series | Add SE HMBSC board support | expand |
Hi Caleb, On Fri, 12 Apr 2024 at 02:54, Sumit Garg <sumit.garg@linaro.org> wrote: > > SE HMIBSC board is based on Qcom APQ8016 SoC. One of the major > difference from db410c is serial port where HMIBSC board uses UART1 as > the debug console with an RS232 port, patch #2 - #5 adds corresponding > driver support. > > Patch #6 adds main HMIBSC board specific bits, features: > - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306) > - 2GiB RAM > - 64GiB eMMC, SD slot > - WiFi and Bluetooth > - 2x Host, 1x Device USB port > - HDMI > - Discrete TPM2 chip over SPI > > Features enabled in U-Boot: > - RAUC updates (refer [2] for more details) > - Environment protection > - USB based ethernet adaptors > > Feedback is very much welcome. > > Changes in v4: > - Rebased on top of qcom-main [4]. > - Split out board DTS patch as #6. > - Convert to text based environment as hmibsc.env. > - MMC regression has been reported for qcom-main branch here [5]. > - Collected further review tag. I haven't seen any further comments on this series. Can you help pick it up? -Sumit > > Changes in v3: > - Rebased on top of qcom-next [1]. > - Collected some review tags. > - Incorporated misc. comments from Caleb and Stephen. > - Split patch#4 as requested. > - Linux HMIBSC board DTS has already been reviewed here [3], I have > incorporated that for U-Boot too. > > Changes in v2: > - Rebased on top on qcom-next [1]. > - Added patch#1 as a fix for generic qcom board support. > - Added patch#4 to enable driving GPIO pins based on pinctrl > configuration. This replaces the custom GPIO configuration. > - Added proper DTS file for HMIBSC board based on Linux DT pattern. > - Merged board support patches into a single patch#5. > > [1] https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commits/qcom-next?ref_type=heads > [2] https://rauc.readthedocs.io/en/latest/ > [3] https://lore.kernel.org/linux-kernel/20240403043416.3800259-4-sumit.garg@linaro.org/ > [4] https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commits/qcom-main/?ref_type=heads > [5] https://lore.kernel.org/all/CAFA6WYO+3VroUdFUVH390taViQX8pMQrOQDTSn0yU6BD5YY53A@mail.gmail.com/ > > Sumit Garg (7): > qcom: Don't enable LINUX_KERNEL_IMAGE_HEADER by default > apq8016: Add support for UART1 clocks and pinmux > serial_msm: Enable RS232 flow control > pinctrl: qcom: Add support for driving GPIO pins output > pinctrl: qcom: apq8016: Add GPIO pinctrl function > arm: dts: qcom: Add Schneider HMIBSC board dts > board: add support for Schneider HMIBSC board > > arch/arm/Kconfig | 2 +- > arch/arm/dts/apq8016-schneider-hmibsc.dts | 491 ++++++++++++++++++++++ > board/schneider/hmibsc/MAINTAINERS | 6 + > board/schneider/hmibsc/hmibsc.env | 40 ++ > configs/hmibsc_defconfig | 87 ++++ > doc/board/index.rst | 1 + > doc/board/schneider/hmibsc.rst | 45 ++ > doc/board/schneider/index.rst | 9 + > drivers/clk/qcom/clock-apq8016.c | 38 +- > drivers/pinctrl/qcom/pinctrl-apq8016.c | 2 + > drivers/pinctrl/qcom/pinctrl-qcom.c | 25 +- > drivers/serial/serial_msm.c | 24 +- > include/configs/hmibsc.h | 16 + > 13 files changed, 760 insertions(+), 26 deletions(-) > create mode 100644 arch/arm/dts/apq8016-schneider-hmibsc.dts > create mode 100644 board/schneider/hmibsc/MAINTAINERS > create mode 100644 board/schneider/hmibsc/hmibsc.env > create mode 100644 configs/hmibsc_defconfig > create mode 100644 doc/board/schneider/hmibsc.rst > create mode 100644 doc/board/schneider/index.rst > create mode 100644 include/configs/hmibsc.h > > -- > 2.34.1 >
Applied, thanks. (b4 didn't seem to detect this series properly, hence the manual mail). On 12/04/2024 11:54, Sumit Garg wrote: > SE HMIBSC board is based on Qcom APQ8016 SoC. One of the major > difference from db410c is serial port where HMIBSC board uses UART1 as > the debug console with an RS232 port, patch #2 - #5 adds corresponding > driver support. > > Patch #6 adds main HMIBSC board specific bits, features: > - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306) > - 2GiB RAM > - 64GiB eMMC, SD slot > - WiFi and Bluetooth > - 2x Host, 1x Device USB port > - HDMI > - Discrete TPM2 chip over SPI > > Features enabled in U-Boot: > - RAUC updates (refer [2] for more details) > - Environment protection > - USB based ethernet adaptors > > Feedback is very much welcome. > > Changes in v4: > - Rebased on top of qcom-main [4]. > - Split out board DTS patch as #6. > - Convert to text based environment as hmibsc.env. > - MMC regression has been reported for qcom-main branch here [5]. > - Collected further review tag. > > Changes in v3: > - Rebased on top of qcom-next [1]. > - Collected some review tags. > - Incorporated misc. comments from Caleb and Stephen. > - Split patch#4 as requested. > - Linux HMIBSC board DTS has already been reviewed here [3], I have > incorporated that for U-Boot too. > > Changes in v2: > - Rebased on top on qcom-next [1]. > - Added patch#1 as a fix for generic qcom board support. > - Added patch#4 to enable driving GPIO pins based on pinctrl > configuration. This replaces the custom GPIO configuration. > - Added proper DTS file for HMIBSC board based on Linux DT pattern. > - Merged board support patches into a single patch#5. > > [1] https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commits/qcom-next?ref_type=heads > [2] https://rauc.readthedocs.io/en/latest/ > [3] https://lore.kernel.org/linux-kernel/20240403043416.3800259-4-sumit.garg@linaro.org/ > [4] https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commits/qcom-main/?ref_type=heads > [5] https://lore.kernel.org/all/CAFA6WYO+3VroUdFUVH390taViQX8pMQrOQDTSn0yU6BD5YY53A@mail.gmail.com/ > > Sumit Garg (7): > qcom: Don't enable LINUX_KERNEL_IMAGE_HEADER by default > apq8016: Add support for UART1 clocks and pinmux > serial_msm: Enable RS232 flow control > pinctrl: qcom: Add support for driving GPIO pins output > pinctrl: qcom: apq8016: Add GPIO pinctrl function > arm: dts: qcom: Add Schneider HMIBSC board dts > board: add support for Schneider HMIBSC board > > arch/arm/Kconfig | 2 +- > arch/arm/dts/apq8016-schneider-hmibsc.dts | 491 ++++++++++++++++++++++ > board/schneider/hmibsc/MAINTAINERS | 6 + > board/schneider/hmibsc/hmibsc.env | 40 ++ > configs/hmibsc_defconfig | 87 ++++ > doc/board/index.rst | 1 + > doc/board/schneider/hmibsc.rst | 45 ++ > doc/board/schneider/index.rst | 9 + > drivers/clk/qcom/clock-apq8016.c | 38 +- > drivers/pinctrl/qcom/pinctrl-apq8016.c | 2 + > drivers/pinctrl/qcom/pinctrl-qcom.c | 25 +- > drivers/serial/serial_msm.c | 24 +- > include/configs/hmibsc.h | 16 + > 13 files changed, 760 insertions(+), 26 deletions(-) > create mode 100644 arch/arm/dts/apq8016-schneider-hmibsc.dts > create mode 100644 board/schneider/hmibsc/MAINTAINERS > create mode 100644 board/schneider/hmibsc/hmibsc.env > create mode 100644 configs/hmibsc_defconfig > create mode 100644 doc/board/schneider/hmibsc.rst > create mode 100644 doc/board/schneider/index.rst > create mode 100644 include/configs/hmibsc.h >
On Tue, 23 Apr 2024 at 17:29, Caleb Connolly <caleb.connolly@linaro.org> wrote: > > Applied, thanks. Thanks. > > (b4 didn't seem to detect this series properly, hence the manual mail). > Switching my workflow to b4 is on my ToDo list. I hope to do it sooner rather than later. -Sumit > On 12/04/2024 11:54, Sumit Garg wrote: > > SE HMIBSC board is based on Qcom APQ8016 SoC. One of the major > > difference from db410c is serial port where HMIBSC board uses UART1 as > > the debug console with an RS232 port, patch #2 - #5 adds corresponding > > driver support. > > > > Patch #6 adds main HMIBSC board specific bits, features: > > - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306) > > - 2GiB RAM > > - 64GiB eMMC, SD slot > > - WiFi and Bluetooth > > - 2x Host, 1x Device USB port > > - HDMI > > - Discrete TPM2 chip over SPI > > > > Features enabled in U-Boot: > > - RAUC updates (refer [2] for more details) > > - Environment protection > > - USB based ethernet adaptors > > > > Feedback is very much welcome. > > > > Changes in v4: > > - Rebased on top of qcom-main [4]. > > - Split out board DTS patch as #6. > > - Convert to text based environment as hmibsc.env. > > - MMC regression has been reported for qcom-main branch here [5]. > > - Collected further review tag. > > > > Changes in v3: > > - Rebased on top of qcom-next [1]. > > - Collected some review tags. > > - Incorporated misc. comments from Caleb and Stephen. > > - Split patch#4 as requested. > > - Linux HMIBSC board DTS has already been reviewed here [3], I have > > incorporated that for U-Boot too. > > > > Changes in v2: > > - Rebased on top on qcom-next [1]. > > - Added patch#1 as a fix for generic qcom board support. > > - Added patch#4 to enable driving GPIO pins based on pinctrl > > configuration. This replaces the custom GPIO configuration. > > - Added proper DTS file for HMIBSC board based on Linux DT pattern. > > - Merged board support patches into a single patch#5. > > > > [1] https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commits/qcom-next?ref_type=heads > > [2] https://rauc.readthedocs.io/en/latest/ > > [3] https://lore.kernel.org/linux-kernel/20240403043416.3800259-4-sumit.garg@linaro.org/ > > [4] https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commits/qcom-main/?ref_type=heads > > [5] https://lore.kernel.org/all/CAFA6WYO+3VroUdFUVH390taViQX8pMQrOQDTSn0yU6BD5YY53A@mail.gmail.com/ > > > > Sumit Garg (7): > > qcom: Don't enable LINUX_KERNEL_IMAGE_HEADER by default > > apq8016: Add support for UART1 clocks and pinmux > > serial_msm: Enable RS232 flow control > > pinctrl: qcom: Add support for driving GPIO pins output > > pinctrl: qcom: apq8016: Add GPIO pinctrl function > > arm: dts: qcom: Add Schneider HMIBSC board dts > > board: add support for Schneider HMIBSC board > > > > arch/arm/Kconfig | 2 +- > > arch/arm/dts/apq8016-schneider-hmibsc.dts | 491 ++++++++++++++++++++++ > > board/schneider/hmibsc/MAINTAINERS | 6 + > > board/schneider/hmibsc/hmibsc.env | 40 ++ > > configs/hmibsc_defconfig | 87 ++++ > > doc/board/index.rst | 1 + > > doc/board/schneider/hmibsc.rst | 45 ++ > > doc/board/schneider/index.rst | 9 + > > drivers/clk/qcom/clock-apq8016.c | 38 +- > > drivers/pinctrl/qcom/pinctrl-apq8016.c | 2 + > > drivers/pinctrl/qcom/pinctrl-qcom.c | 25 +- > > drivers/serial/serial_msm.c | 24 +- > > include/configs/hmibsc.h | 16 + > > 13 files changed, 760 insertions(+), 26 deletions(-) > > create mode 100644 arch/arm/dts/apq8016-schneider-hmibsc.dts > > create mode 100644 board/schneider/hmibsc/MAINTAINERS > > create mode 100644 board/schneider/hmibsc/hmibsc.env > > create mode 100644 configs/hmibsc_defconfig > > create mode 100644 doc/board/schneider/hmibsc.rst > > create mode 100644 doc/board/schneider/index.rst > > create mode 100644 include/configs/hmibsc.h > > > > -- > // Caleb (they/them)