| Message ID | 20200318144749.25509-1-ioana.ciornei@nxp.com |
|---|---|
| Headers | show |
| Series | net: ldpaa_eth: transition to CONFIG_DM_ETH | expand |
> Subject: [PATCH v2 00/14] net: ldpaa_eth: transition to CONFIG_DM_ETH > > This patch set targets to add support for CONFIG_DM_ETH in DPAA2 based > SoCs. We start by adding a DM MDIO driver for the MDIO interface found on the > mEMAC. The next two patches start the transition of the ldpaa_eth and fsl-mc > drivers towards using the 'struct udevice' and probing on DTS nodes. > > Any unnecessary configurations made for the DPAA2 ethernet devices are > compiled out when CONFIG_DM_ETH. This is because any information > necessary is available in its associated DTS node. > > For the moment, only configs of RDB boards are transitioned to > CONFIG_DM_ETH since its more of a straightforward move than for the QDS > ones. > Hi Priyanka, Any feedback regarding this series that I can act on? Ioana > As an example, the 'dm tree' output for a LS2088ARDB board looks something > like the following: > > => dm tree > Class Index Probed Driver Name > ----------------------------------------------------------- > (...) > simple_bus 0 [ + ] generic_simple_bus |-- fsl-mc at 80c000000 > simple_bus 1 [ + ] generic_simple_bus | `-- dpmacs > eth 0 [ + ] ldpaa_eth | |-- DPMAC1 at xfi > eth 1 [ + ] ldpaa_eth | |-- DPMAC2 at xfi > eth 2 [ + ] ldpaa_eth | |-- DPMAC3 at xfi > eth 3 [ + ] ldpaa_eth | |-- DPMAC4 at xfi > eth 4 [ + ] ldpaa_eth | |-- DPMAC5 at xfi > eth 5 [ + ] ldpaa_eth | |-- DPMAC6 at xfi > eth 6 [ + ] ldpaa_eth | |-- DPMAC7 at xfi > eth 7 [ + ] ldpaa_eth | `-- DPMAC8 at xfi > mdio 0 [ + ] fsl_ls_mdio |-- mdio at 8B96000 > mdio 1 [ + ] fsl_ls_mdio `-- mdio at 8B97000 > > Changes in v2: > - used the positive logic (ifdef CONFIG_DM_ETH instead of ifndef) > - refactor the mdio read/write code for code reuse > > Ioana Ciornei (14): > drivers: net: add Layerscape mEMAC MDIO driver > drivers: net: ldpaa: add support for probing based on the DTS > drivers: net: fsl-mc: add support for CONFIG_DM_ETH > board: ls1088ardb: transition to DM_ETH > board: ls2088ardb: transition to DM_ETH > arm: dts: lx2160a: add external MDIO nodes > arm: dts: ls2088a: add external MDIO nodes > arm: dts: ls1088a: add external MDIO nodes > arm: dts: lx2160ardb: add DPMAC and PHY nodes > arm: dts: ls2088ardb: add DPMAC and PHY nodes > arm: dts: ls1088ardb: add DPMAC and PHY nodes > configs: ls1088ardb: enable CONFIG_DM_ETH and related > configs: ls2088ardb: enable CONFIG_DM_ETH and related > configs: lx2160ardb: enable CONFIG_DM_ETH and related > > arch/arm/dts/fsl-ls1088a-rdb.dts | 102 ++++++++ > arch/arm/dts/fsl-ls1088a.dtsi | 102 +++++++- > arch/arm/dts/fsl-ls2080a.dtsi | 90 ++++++- > arch/arm/dts/fsl-ls2088a-rdb-qspi.dts | 88 +++++++ > arch/arm/dts/fsl-lx2160a-rdb.dts | 52 ++++ > arch/arm/dts/fsl-lx2160a.dtsi | 65 +++++ > board/freescale/ls1088a/eth_ls1088ardb.c | 2 + > board/freescale/ls1088a/ls1088a.c | 5 + > board/freescale/ls2080ardb/eth_ls2080rdb.c | 7 + > board/freescale/ls2080ardb/ls2080ardb.c | 4 + > configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 5 + > configs/ls1088ardb_qspi_defconfig | 5 + > ...1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 5 + > configs/ls1088ardb_sdcard_qspi_defconfig | 5 + > configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 5 + > configs/ls1088ardb_tfa_defconfig | 5 + > configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 4 + > configs/ls2088ardb_qspi_defconfig | 4 + > configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 4 + > configs/ls2088ardb_tfa_defconfig | 4 + > configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 4 + > configs/lx2160ardb_tfa_defconfig | 4 + > drivers/net/Kconfig | 7 + > drivers/net/Makefile | 1 + > drivers/net/fsl-mc/mc.c | 48 +++- > drivers/net/fsl_ls_mdio.c | 146 +++++++++++ > drivers/net/ldpaa_eth/ldpaa_eth.c | 231 +++++++++++++++--- > drivers/net/ldpaa_eth/ldpaa_eth.h | 6 + > include/configs/ls1088ardb.h | 2 + > 29 files changed, 956 insertions(+), 56 deletions(-) create mode 100644 > drivers/net/fsl_ls_mdio.c > > -- > 2.17.1