List-Id: U-Boot discussion <u-boot.lists.denx.de>
From: philippe.schenker at toradex.com (Philippe Schenker)
Date: Wed, 11 Mar 2020 11:59:21 +0100
Subject: [PATCH v2 0/5] Adding support for KSZ9131 and add it to Toradex
boards
Message-ID: <20200311105926.1610-1-philippe.schenker@toradex.com>
Hello,
This patch series enables support for the new KSZ9131 PHY. This PHY is
a successor of the KSZ9031 and mostly software compatible but fixes
some problems the KSZ9031 had.
The patch series also takes care skew values are correctly set on
Toradex boards where we will change to KSZ9131. On Verdin this Series
corrects wrong values that are currently in.
Overview of the series:
Patches 1-2: Add KSZ9131 functionality
Patches 3-6: Add KSZ9131 skew values for Toradex boards.
Changes in v2:
- Dropped duplicate patch 'ARM: dts: verdin-imx8mm: Remove unsupported
rxc/txc MAC dly properties' of [1], that in the meantime already got
merged.
[1] https://patchwork.ozlabs.org/patch/1238012/
Philippe Schenker (5):
net: phy: micrel: Use defines for PHY_IDs and MASK
net: phy: micrel: Add basic support for KSZ9131
verdin-imx8mm: Change board phy skew values for our ksz9031
board: verdin-imx8mm: Add KSZ9131 phy skew settings
board: apalis_imx6: Add KSZ9131 phy skew settings
board/toradex/apalis_imx6/apalis_imx6.c | 89 +++++++++++++++++----
board/toradex/verdin-imx8mm/verdin-imx8mm.c | 63 +++++++++++++--
drivers/net/phy/micrel_ksz90x1.c | 62 +++++++++++++-
include/micrel.h | 11 +++
4 files changed, 200 insertions(+), 25 deletions(-)