Some preparational steps and then adding initial minimal support for the
Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A module. They are now
strapped to boot from eFuses which are factory fused to properly boot
from their on-module eMMC. U-Boot supports booting from the on-module
eMMC only, SDP support is disabled for now due to missing i.MX 8M Mini
USB support.
Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots
- Ethernet
- GPIOs
- I2C
Boot sequence is:
SPL ---> ATF (TF-A) ---> U-boot proper
ATF, U-boot proper and u-boot.dtb images are packed into a FIT image,
loaded by SPL.
Boot:
U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
Normal Boot
Trying to boot from MMC1
NOTICE: Configuring TZASC380
NOTICE: RDC off
NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty
NOTICE: BL31: Built : 01:11:41, Jan 25 2020
NOTICE: sip svc init
U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz
Reset cause: POR
DRAM: 2 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In: serial
Out: serial
Err: serial
Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149
Net: eth0: ethernet at 30be0000
Hit any key to stop autoboot: 0
Verdin iMX8MM #
Changes in v3:
- Drop pinfunc patches and just sync with linux-next as suggested by
Fabio, Frieder and Oleksandr.
- Drop AG resp. Inc. in copyright notices as adviced by our legal.
- Add Oleksandr's reviewed-by tags.
- Add missing config block information for Verdin iMX8M Nano as well.
- Use pin names from the linux-next pinfunc sync as suggested by
Oleksandr.
Changes in v2:
- Newly added this patch to the series splitting Verdin one as suggested
by Oleksandr.
- Split Apalis iMX8X off from this one as suggested by Oleksandr.
- Further clean-up as announced on the mailing list.
- Update cover letter with updated SKU naming and few clarifications.
Igor Opaniuk (3):
board: toradex: Add Verdin iMX8M Mini support
board: toradex: verdin-imx8mm: add README
board: toradex: verdin-imx8mm: add MAINTAINERS
Marcel Ziswiler (4):
arm: dts: imx8mm-pinfunc: sync latest linux-next pin func header
toradex: tdx-cfg-block: add Apalis iMX8X support
toradex: tdx-cfg-block: add Verdin iMX8M Mini/Nano support
imx: imx8mm_evk: spelling in readme file
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx8mm-pinfunc.h | 20 +-
arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 103 ++
arch/arm/dts/imx8mm-verdin.dts | 1007 ++++++++++
arch/arm/mach-imx/imx8m/Kconfig | 7 +
board/freescale/imx8mm_evk/README | 2 +-
board/toradex/common/tdx-cfg-block.c | 39 +-
board/toradex/common/tdx-cfg-block.h | 7 +-
board/toradex/verdin-imx8mm/Kconfig | 30 +
board/toradex/verdin-imx8mm/MAINTAINERS | 9 +
board/toradex/verdin-imx8mm/Makefile | 11 +
board/toradex/verdin-imx8mm/README | 88 +
board/toradex/verdin-imx8mm/imximage.cfg | 16 +
board/toradex/verdin-imx8mm/lpddr4_timing.c | 1850 +++++++++++++++++++
board/toradex/verdin-imx8mm/spl.c | 180 ++
board/toradex/verdin-imx8mm/verdin-imx8mm.c | 73 +
configs/verdin-imx8mm_defconfig | 98 +
include/configs/verdin-imx8mm.h | 128 ++
18 files changed, 3662 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/dts/imx8mm-verdin-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mm-verdin.dts
create mode 100644 board/toradex/verdin-imx8mm/Kconfig
create mode 100644 board/toradex/verdin-imx8mm/MAINTAINERS
create mode 100644 board/toradex/verdin-imx8mm/Makefile
create mode 100644 board/toradex/verdin-imx8mm/README
create mode 100644 board/toradex/verdin-imx8mm/imximage.cfg
create mode 100644 board/toradex/verdin-imx8mm/lpddr4_timing.c
create mode 100644 board/toradex/verdin-imx8mm/spl.c
create mode 100644 board/toradex/verdin-imx8mm/verdin-imx8mm.c
create mode 100644 configs/verdin-imx8mm_defconfig
create mode 100644 include/configs/verdin-imx8mm.h